Reviews
Does a surprisingly good job.
This is an inexpensive Chinese Case that I have seen on some Site. (Although it has the company name of "Rough &Road" on it.)
It is inexpensive but does the job well. (For now)
It is installed on CT125CT110 HUNTER CUB (JA65), but it seems that Attachment for CT110 HUNTER CUB is not necessary separately and can be installed.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Just the right size
I purchased this for the purpose of storing my radio, it attaches to the Tank horizontally on the Black Bird and is convenient for refueling without having to move. If only it came with a Rain Cover. View detail
Bar padBag
Offfor Vehicle purchases.
I was going to buy the same Manufacturer's One size Large size, but
Changed to this MODEL because it is sold out.
Cigarette, Zippo, Fold Wallet, and Mask can all fit.
A small phone may fit in the clear case portion of the navigation/smartphone compartment. Incidentally, Xperia1? It is difficult to take out the phone from the case (laugh).
View detail
It is a little difficult to install.
The size is just right for a GRASS TRACKER retrofit carrier, and it is convenient for storing small items.
However, there is no description in the Instruction Manual on how to fix the included fixing band to the motorcycle, so I have been installing it in my own way, but I am not sure if it is correct.
View detail
It might not be suitable for Off-road.
I bought this because I wanted a Large fine-meshed Saddle Bag.
It's not a Saddle Bag, but the capacity is large, and I think the high waterproof point is good.
I'll write my personal opinion from here.
If not installed with Saddlebag Support, it will hit the rear tire.
Also, if you use the belt that comes with it, you will not be able to use Tandem because it attaches to the Rear part of Seat.
I made my own Belt and PlasticBuckle and attached it to my Rear Carrier.
With the right adjustments, Tandem:o ability and will not hit the rear tire.
Note that the Main compartment is Completely Waterproof, but the other Pockets are non-waterproof.
View detail
The durability of the rubber strap is
It is waterproof, and you can close the top cover by turning the mouth round and round. It's the same mechanism as a typical waterproof bag.
When it rains, the contents stay dry. It's perfect. So it's a good idea to keep things that you don't want to get wet, but if you put something in there that's a little bit wet, it can get steamy.
Also, the rubber strap for fixing it is thick and sturdy, but it stretches gradually, so you will need to find a way to fix it. So I don't use it now. If you want to buy one, I think Belt type is easier to adjust and will last longer.
View detail
I'm happy with the function
I can't complain too much about the price, but I feel that it cannot be fixed tightly I've tightened it up quite a bit, but it moves pretty easily when you move it by hand I'm not sure if this is the case or not
The important point is that the Joint part was rusted from the beginning I've never seen this happen before Normally this would be an Objection Level case, but it's too much trouble, so I'm using it as is (T-T)
I installed the Side Back and my impressions are very good (By the way, school bag) The motorcycle is a Bell RC50
View detail
Focus on Design
You need to be creative in storing it because it's shaped like a drum The bottom is round, so it is not stable unless it is fixed tightly
I still think Square's Seat bag is more user-friendly Well, it's just the atmosphere and appearance
I feel like I can fit about one night's worth of luggage in it But it's got a lot of D-cans on it, so there's some versatility in fixing it
There is a Fastener that you can access inside with your mouth closed, which is useful I feel the atmosphere is right for American and NeoRetro
View detail
Balance with Motorcycle is good
I've used ROUGH&ROAD products elsewhere, so you can be assured of their quality
Balance with the Motorcycle was a good choice
View detail
subtle
The product itself is nice, but anyway ...
If you use hanging so much, I guess it's pretty anxious if you consider it as horizontal.
View detail
I got a little Large
Rough made Tapered - Buy Cover as Tank Bag for for Replacement.
I wondered if I could make a little Large, but it was a Large rinse.
I think that it is good for the minute to divide it as consumable though it is not reliable because it was originally thin making.
View detail
Rose skirt for sewing
Porch, even at Tank Pouch P. A. Since I use SS system, I purchase it additionally.
The part to clasp the back : Sewing of Magic tape (Seam allowance) It is sloppy and can not be stopped by Beauty. (I do not measure individual Length as chitin)
I like cutting it and sewing it again, but it is the worst
From there, it can not be said that Magic does not start to peel off so you have to have it purchased in-kind or checked and shipped..
Because it is for Belt of the waist, so that it can be used for shoulder Belt of Rucksack, it is perfect if it can change the direction of 90-degrees.
View detail
Quantity : Pair (for Left and Right) Dimensions do not match?
I bought it for installation on the DT Handlebar, but when I unpacked it felt a sense of incompatibility. Looking closely the vertical dimension of the front Clear case is Quantity : Pair (for Left and Right) It depends on. With Vernier calipers, 1Centimeter weak Left Side is made short. Spec. I also thought that it was not so, I contacted Support and sent it back once.
As a result, as Manufacturer acknowledged the difference in dimensions, we got the answer that it is within the range of good products to the last, WebikeSupport sent a replacement item when I thought of Large strange regret. Replacement items are satisfied without any difference in dimensions to worry about.
This time, I experienced Risk that I could not confirm the actual thing like mail-order, and dissatisfaction is left to Manufacturer, but since Webike's correspondence was solid, I would like to continue using it.
View detail
Car navigation system is put in
Jupiter 's Car navigation system was left due to the sale of the car, so I bought this Back to install it for Motorcycle.
6InchNavigation is somehow involved. Actually, RadarUnit of Option and ETC are also included in fact.
I fixed the Belt of Back by wrapping it around the Bar pad, but of course it gets unstable and rotates. I think that it is the same if you attach it directly to Handlebar. If there is improvement in fixation method, it will be better if it is better. (I'm holding a Tension on Magic tape and stopping it)
Since Back can be separated from Belt, it is satisfactory in terms of price.
View detail
In Touring
Size is just a good feeling When going to Touring Puncture Repair Kit and tool kettle, the capacity is exactly good. Make it firmly and easy to install. High speed running was Large sturdy even if I took Speed ??out so. View detail
The XG250 TRICKER is equipped. Although it is used for employment of nuvi205, when an external battery is included, it is a just right Size. Since a Bar pad is directly equipped with the place with this sufficient product, it is the point th
The XG250 TRICKER is equipped.
Although it is used for employment of
nuvi205, when an external battery is included, it is a just right Size.
Since a Bar pad is directly equipped with the place with this sufficient product, it is the point that a crack is not attached to the car-body side without a Case main part hitting a Tank, a Gasoline cap, etc.
Moreover, since an angle can be adjusted in the position of a Bar pad, it is easy to unite with its Riding position.
The rotation preventive measure of
* Bar pad is needed.
View detail