Reviews
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
I bought it.
I bought it but haven't used it three times, only to go shopping for curry and dumplings. It is not a very large bag, so it can only hold about one or two days and nights. It is faster to bring Single Seat and replace it when you remove the Back. View detail
Fit perfectly
easy to install , just need to know how to open the left side cover so that you can plug & play the wiring which is already there , only need to remove the dummy cover View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
As expected
The key was a little tricky to install.
That's the OEM!
The sense of unity when installed is wonderful.
It's a streamlined design, so it's more than the actual capacity.
It's nice that it doesn't hold any luggage.
View detail
Fits: HONDA Rebel300, HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA CL250, HONDA CL500
Yes on the left side, not sure on the right side...
The bag itself is great. Good quality, well made, looks good. I fitted one on the left side of my GB350, amazing. I bought a second one for the right side of the bike, and the bottom almost touches the exhaust. If it's full with something heavy it will definitely touch. Considering how hot the exhaust gets, I'm not convinced this is very safe and that it will last long. Check the photo attached to this review! As for the delivery, 5 days door to door from Japan to Australia, impressive! View detail
Loaded documents can be easily stored.
The Bolt 4 fixings can be secured with the upper lock and unlocked with the car body key.
The OEM Tool Box can easily hold a CALI card or Maintenance Notebook, which would otherwise have to be folded all the way down.
The Bracket also has a helmet lock function, but if a large box is installed in the Carrier, the key may interfere with the lock and make it impossible to open the box.
View detail
Required to fix side box
Required to install HondaOEMOption side box.
Merit, which can be opened and closed with the car body key because of the one-key system, is good, but the work of repeatedly inserting and removing six different tumblers into the key cylinder to assemble it is detailed and large and strange.
Perhaps because the Screw holes were painted, it was difficult to get Bolt into the Carrier holes.
Also, the price is pretty good for the quality, so I would have been happy if it was around 20,000 commissions.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Easy installation!
Home center box used for installation. The bracket is solid and OEM. Please note that the screws for installation are for OEM, so the pitch is short. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Easy installation
Used during installation of a homemade box. It was easy to install.
It would be even more appreciated if the included Screw dimensions were 50!
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 50 (AA04), HONDA Benry 110, HONDA Benly 110 Pro, HONDA Benry., HONDA Benly Pro, HONDA cross-cub 110
Used for SEA BASSK50
I installed it on my SEA BASSK50. As expected of a Honda OEM, it is well made and looks good when mounted on a motorcycle. I used to have a tool box from Home center, but the quality was totally different and I knew that a motorcycle-specific product was the way to go. The price is reasonable and I am very satisfied. View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 50 (AA04), HONDA Benry 110, HONDA Benly 110 Pro, HONDA Benry., HONDA Benly Pro, HONDA cross-cub 110
Lightweight, increased capacity
I had an OEM Carrier with an extended Carrier and a SteelBox (Honda option), but I was concerned about the weight, so I changed the Carrier to a KIJIMA Rear Carrier and also changed the Box to this one. I think the previous Hohe is better in terms of looks, but the lightness and increased capacity are a world of difference. I will use StickerTune to make it more to my liking. View detail
Fits: HONDA Rebel300, HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA GB350S, HONDA GB350
I still like OEM.
Installed on a GB350.
The material is soft but sturdy like a canvas. The bottom part is stronger and will not deform even if a somewhat heavy object is placed in it. As you can see in the photo, there is enough space between the exhaust system and the bottom.
I gave it 4 stars for functionality because there are no pockets in the bag, and 4 stars for design because of the simplicity of the shape, but I am satisfied with the storage capacity because it can hold enough luggage for a 200 kg touring trip.
I also like the fact that it is easy to remove from the Bracket (there is a lock; I'm not sure how it works). I like the fact that it is easy to remove from the Bracket (there is a lock).
View detail
I knew it was China.
It is regrettable that HondaOEM Western products in general are made in China. The protective film should be cut from the beginning and included in the package.
I would like to have it. If it fails, you will have to go out of your way to purchase a protective Film. Careful, that's not enough.
I would like to see more SeatBacks made by Japanese manufacturers.
View detail
Fits: HONDA Rebel300, HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA CL250, HONDA CL500
I have received it well
It's the right size and satisfactory quality... Delivery was fast and it was packaged well.I thought the left bag might be too big, but I'm glad that it's the right size, neither too big nor too small... I'm so satisfied that I'm thinking about purchasing an additional right bag as well. View detail
Side bag made by SW-MOTCH can be attached
CL500 (CL250) These products are listed in the OEMOptionCatalogue of (Honda part number 08L71-K3S-JA1)
Side bag for SW-MOTECH's SLCSide carrier can be installed.
Of course, OEMOptionCatalogue's Saddle Bag can also be installed
I am wearing SW-MOTECH SYSBAG WP in S Size
One-touch mounting and dismounting allows you to remove it at your touring destination and bring it to your lodgings, or you can remove it at your lodgings and bring it back to your lodgings.
If you have another Bag, you can swap it out and run with it if you feel like it!
Even without the bag, the design is not uncomfortable and does not emphasize the presence of the bag, which is a nice touch.
View detail
Fits: HONDA Rebel300, HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA CL250, HONDA CL500
HONDA Saddle Bag (Large)
I received this Honda Saddle Bag (Large) in 5 working days using EMS shipping. It's a great fit to my Rebel 1100. The quality is very good. It also looks like its waterproof indeed. I am glad I ordered this. Even though it costs 3 times more, the size and spacing of the bracket & bag is perfect unlike those made from China where you have to customize it to eliminate rubbing against other parts of the bike View detail
Fits: HONDA NC750X, HONDA NC750X, HONDA X-ADV, HONDA XL750 TRANSALP
Large capacity can be loaded.
Requires OEM Carrier and one-key InnerLock cylinder for use.
Mounting on the car body is very easy, but required a little hang.
Luggage can be placed in the Large capacity, but the maximum Large load weight is 6 kg, so heavy items cannot be placed.
Two full face helmets came in with Income.
The finish is not so good because it was made overseas. There are some BALI, grease, and markings caused by chalk from the production process.
View detail
Poorly made so it floats.
The bolt and double-sided tape are used to secure the bolt, but the double-sided tape peeled off quickly due to poor workmanship. View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
The best of Honda One key system!
Due to its aerodynamic design, it receives less wind resistance. Honda's one-key system can be applied, which is very convenient. You don't need to carry a separate key like GIVI products. The capacity is a little on the small side, but this sacrifice is not bad for a sleek design. The quality of the product is average, but if you install a dedicated plate on the rear carrier and set it up, there is very little shaking. The fact that international shipping costs a lot is a bit of a disadvantage. -------------------------------------------------- -------- Aero dynamic design is less resistant to wind. It is very convenient to apply Honda's one-key system. You don't have to carry a key like a GIVI product. The capacity is a bit small, but this sacrifice is not bad for a sleek design. The quality of the product is normal, but if you install and set a dedicated plate in the rear carrier, it is very few. It is a bit disadvantageous to have a lot of international shipping costs. Powered by Google Translator View detail