Reviews
Kawasaki green is nice. But it is too thin.
I bought a used Kawasaki KMX125 with a ponhang, removed the ponhang part, cleaned and polished it, repainted it, replaced the tattered seat with an external one, and even sprayed the logo …. I bought this Kawasaki green Key Holder to match the color of my motorcycle.
The color is Kawasaki green and it looks very nice. However, the leather is a little thin if I may say so. If I wanted to be extravagant, it would be better if the center was bulged like Cactus and the periphery was thin. To put it another way, it feels like a piece of cardboard cut and pasted together. I can't complain because of the price, but if possible, it would be better if the leather were a little thicker. Well, it is too much for Ponghang Motorcycle. But if it is a Motorcycle that costs more than 1,000,000, I don't think it would be suitable for it.
View detail
Harder than I expected.
The Key Holder was old and falling apart, so I replaced it. It feels good to have a new one, and since it is simple, it is not difficult to use. View detail
Large and good
I was looking for a suitable key holder for my motorcycle, and I found this one. View detail
Point Utilization
When I have extra points, I buy small items rather than let them expire.
It is a little bit large, so it might be a little bit out of the way if you put it on your motorcycle key, but the texture is good.
View detail
Attachment
I had no use for a small amount of Points, so I bought a Key Holder to consume them.
If it wasn't Point, I probably wouldn't buy it, but if I put it on my backpack...
Well, it's pretty rare that people ask me if that's a brembo.
View detail
Used as an accompaniment to Main key
Black also has it and uses it as a companion for his keys.
I think the quality and so on are fine because it is HondaOEM only.
View detail
a cute keyholder
Quality and Texture Information Monkey key holder made of rubber I am cute and satisfied with the feeling of use Design Information Monkey Design Size Chart Information ¥ 500 Size Cost performance and comparison with other products Only Honda key holders are purchased and cannot be compared to other products Delivery and packaging to WeBike in a week The packaging is great It is regrettable that the color of problems, precautions, or precautions does not vary My monkey is red, but only yellow exists View detail
Good cosmetics as a corporate good
List price550.
No discount even at the quintessential WeBig.
Simple Shape and Logo
Scratch-resistant Size for MotorcycleBody
It is available in several different colors, and as a Key Holder, it can be used as a key holder.
Necessary and sufficient.
Just (partly because of the coloring) cheap.
No, it's just that it's cheap (laughs).
Personally, I'd be happy to pay another 300-400 more.
I would like to see the thickness of the leather and the sewing cost.
View detail
Affordable Size
I use it as a MainKey Holder.
Satisfied with the Size as per Image
It is easy to use and the Carbon Style design is great.
Cosmetically, I think it is fair to say that it is considerable.
View detail
If practicality is important.
I do not use it as a Smart Key Case.
It is convenient to keep small keys together.
View detail
Retro feel is good.
The material of the Key Holder is soft and will not damage the keyhole.
The design is also good with a retro feel.
View detail
I purchased the product before it was discontinued.
Because the position of ZMain key is a special place called TankFront, I have substituted for VehicleKey case for prevention of wound, but it is too large and heavy and often gets caught around Steering.
I had been driving with the Main Key at the practice site and on the course, but I still had the impression that I was a bit concerned about touring and city driving, and I was thinking of making the Simple and Small Type lightweight in the near future.
I happened to find a Kawasaki Attachment product at a local store, and it was close to what I was thinking of, and almost the best, but the Green Light was sold out and the store was planning to deliver it? However, the Green Light is sold out and the shop is planning to deliver it.
I checked and found it in stock at Webig! The actual product I received was a solid and beautiful finish and deep green light for floor leather, and the inside is a shiny lime green tone with a cloth material that seems to be resistant to scuffs and scratches.
Main key, Helmet holder key, etc. I am currently using a total of 3 types of keys.
Incidentally, the Main Key is used without storing it because it has a key attachment made by Kijima.
It is also comfortable to use, simple and unobtrusive, and it is hard to get wounds around the main key of the tank part.
View detail
Short
The long and thin Type of the same brand that I had been using for a long time did not fit well in the vehicle I switched to, so I replaced it with this product. View detail
Good for the One point of the key.
It is well made down to the smallest detail. I like it as one point.
Since we have three CUBs, it is very useful to have a PVC Key Holder for each of them so that we can easily identify which CUB the key is for. Actually, each of the three CUBs has a different key size and design, so I can tell them apart even without the markers. (Lol)
View detail
Leaks.
[How is it used?
I ordered a Kawasaki Key case because it is a Kawasaki car, and the color is Green Light to match my car. The color is Green Light to match my car body.
Was the one you received as per Image?
I purchased this product with the understanding that multiple keys would be able to be installed just by looking at the catalogue. I did not check the key hook inside.
How was your experience with it?
I immediately tried to use it in Touring, but a problem occurred. The key of the security good locked inside leaked out. No matter how many times I tried, it kept leaking out through the gaps in the leather. I chose a cover type key case to prevent scratches, but it was no good at all. When I looked at it carefully, I found that (1) the key was too small and leaked and (2) the hook on which the main key was hung pulled the key to the ring, and the key was pulled out along the way.
[Improvement Point
So, I bought another Ring (made of Stainless Steel, less than 100 yen at HOMSEN) to make the Main key independent. I bought one more Ring (made of stainless steel, less than 100 yen at Homesensee) and put it on. As a result, it looks good without leaking other keys. I don't use it very often, but the Belt hook works well. Now the KawasakiBrand is protected. (Lol) PS:By the way, the main key is left out.
View detail
Key Holder replacement
[How is it used?
The Honda Key Holder that was attached to the NS-1 Key broke, so I bought a new one.
I really wanted to use the same Key Holder, but it seemed to have already been discontinued.
Again, I looked for a Honda Attachment and decided on this Key Holder.
Was the one you received as per Image?
The size of the Key Holder is just right, simple and cool.
How was your experience with it?
I have installed several keys such as Motorcycle Key and Garage Key on the Key Holder and it is easy to use.
[Points to note]
I haven't gotten it wet with rain, etc. yet, but if it gets wet with water, the color will likely fade,
I try not to accidentally leave Key on when I wash my car.
How did it compare to other products?
Compared to other HondaAttachment products, the price was reasonable and it seemed easy to use.
I tried this way.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
nothing special
View detail
Large than I expected
Since the area around the main switch is painted black, a normal key holder would peel off when another key hits it, so I bought this one that can wrap unnecessary keys.
However, this does not mean that the body is completely protected, as there are parts of the body with Rivet or Rings that belong to Gold.
The ultimate solution seems to be to insert only the Main key.
View detail
Cool! But...
The design is as good as the picture and the texture is satisfactory.
However, I am slightly concerned about the weight.
I don't think I need to worry about it, but I use it FOR Vehicle because it is noticeably heavier than what I have been using.
We are very satisfied with the Parenthesis quality.
View detail
Fits: HONDA PCX150, HONDA FORZA(MF13E), HONDA SUPER CUBC125, HONDA X-ADV, HONDA PCX
As expected, OEM Product
Key less OEM Product to prevent scratches on the hob!
The stones are the perfect Size and texture, but...
If you use a little more texture or Brassetc. on the Gold part........
More Parenthesis would be nice.
View detail
dirty
Ring and Moldetc. with thin and mirror finish. texture is good.
But Material:Silicon, so it will be backed up with use.
With leather it would be tasteful, but with Silicon it's just dirty...
I think Navy is aesthetically better, although the ninja feel is diminished.
And although there are few opportunities to attach and detach, the Ring is quite stiff and the keys are Large strange to attach and detach.
View detail