Reviews
Pre-installation impression
The Instruction Manual was not included in the package, but can be found on the product page of the official ENDURANCE website. It is recommended to check the contents before purchasing.
The product is made of steel sheet gold, so it does not have a luxurious feel, but the machining precision and the texture of the paint are good, and it does not look so cheap.
The ENDURANCE Logo is a Sticker, so you don't have to put it on if you don't need it.
Low head cap bolt for Case mounting (M6, hexagon socket) and HexalobularBolt for fixing the lid (M5) was included in the package.
Hexalobular (Torque) was supplied with a Wrench, but a 3mm Hexagonal Wrench and 10mm Spanners are required to tighten the Cap bolt.
To store the ETC in the Case, simply affix a protective sponge tape to the Case and place it inside.
Since this is a universal product, it is necessary to arrange an appropriate bracket separately for installation on the car body.
The dimensions of the holes available for installation were described in the Instruction Manual for handling.
The case does not have waterproof or dustproof features, but I think this is sufficient because it prevents direct exposure to rain in addition to the waterproof feature on the ETCBody side.
In general, it is sufficient for my needs, but I feel that the price is a bit expensive since there are many other with-key products available for a little more money.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
The design and large size fit in the car body.
I use it with XL1200C SPORTSTER 1200, and there is no sense of discomfort even if I install it in the body without being too large. Because I do not pull out and insert it every time when I am touring, it is OK though I feel that opening and closing is a little troublesome. By the way, the same product is attached to the other side of the car body, and I use it for a little Accessory Case. View detail
The quality of Leather is very good.
American style ETC leather case will protect your ETC body from rain. The leather is very good quality and well made. View detail
The Material of the cowhide is very good.
I am very pleased with the design of the ETCBody and the way it looks. View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
I'd like to see you do something different.
I installed it in TouringSEROW. However, Dial lock is a little unreliable in two digits. In addition, because Base plate and Cover are not sealed, when I run in Dirt and rain, because mud enters to the inside, I try to clean it well every time. View detail
In Accessory Case
Because the Rider's belly is sticking out so things don't fit in the Pocket (lol)
I bought it as a Porch because I wanted to keep it on my motorcycle all the time and use it right away I did
The capacity is only enough for ETC, but the USBCable, Stand holder, and Accelerator is now in
There is a flap, so things don't fall out without squeezing the zipper, and it's easy to operate with one hand
There were four holes in the back of the Thailand lock, but I ignored them (laughs), and 10 in the Center There is a hole of 2.5mm, so I bolted it in place
View detail
It's PVC, so it's safe to expose to the elements
The price and low price of the Case for ETC made the decision to buy it
While most of them are genuine leather, this one is inexpensive and made of PVC, so you don't have to worry about maintenance and getting wet in the rain It's very easy to use However, I am worried about its durability because it is soft and not firm like genuine PVC I think you'll have to check the deterioration of Tie Band while using it to install to the body of the car
It's a bit cumbersome because of the way to fasten the lid with a belt It would have been better if you could take it out a little easier, but the price is low enough
View detail
Motorcycling Companion without a Load
It's a necessity when attaching a separate ETC to a motorcycle without a load
There are screw holes, so if you extend the bracket from the body of the car, you won't have to worry about it coming off No, sir
I think you can put it on quite a few different places if you get creative
I think that it is easy to use Large because it becomes easy to insert and remove the card
In addition, only the attached Tie Wrap is fragile as others have written, and even if you just pull on it I'm loosening up
It's better to have a commercial product
View detail
Quality is excellent
Quality is an excellent item.
I could not install it between Sus and Blinker due to Small raw judgment mistake.
Placed behind Plate that I installed at the end of my troubles (Before) It was to.
Installation was easy, but I had a hard time handling Wiring.
I love it..
View detail
Mistuba MSC - BE 700 E can be stored
I used it when I temporarily removed the Side bag which housed ETC.
Although the MSC - BE 700 E was not listed in the correspondence list, it seemed to be tense numerically and it was perfect fitting in fact.
Although it was generally satisfactory, it became a deduction that the claws of the attached Tie Wrap broke immediately.
View detail