Reviews
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
For peace of mind
Purchased to protect myself and justify my own driving while driving on Motorcycle.
The product was relatively easy to install and complete.
It took some thought to run the Camera wires through the interior of the car body, but the rest of the connection was completed in comparative perspective.
The recorded images are clear and secure with no problems.
There is no GPS function, but the situation is satisfactory enough if you want to check the driving conditions.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Refreshing.
I am happy to be able to install the DriveRecorder-Body without having to worry about where to place it.
It is Stage of Exactly on Body.
View detail
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
Pretty good
I don't know about other drarecorders, but it is a normal shot.
Command on Switch is easy to understand and the UserInterface of the application is very clear.
I feel that the parking monitor is less likely to be triggered by the weak battery in SR400. However, the engine is started within 5 KICKs.
View detail
Large sturdy even on Motorcycle as it is firmly fixed.
I use it on my Insta360 X3. (I'm planning to buy Ace soon, so I'll use it there as well.)
With X3, the position is so delicate that it just hits the chin of the full face, so I think other ActionCamera would have no problem at all,
The Camera is easy to put on and take off, and since it has two clasps, the Camera will not be upside down as is often the case with products that hang from the neck.
The fact that it is an official Insta360 product is also a reassuring factor.
It can be used for walking around town or in the mountains, except for motorcycle, and since the price is only 3,000 yen, one can be used for various situations and is very cost effective.
View detail
SHOEIHelmet changed from X14 to X15
I purchased a new bracket for my helmet because I changed my SHOEIHelmet from X14 to X15 (see photo). This manufacturer has a reliable supply support system, even down to the smallest parts. View detail
SS is difficult to find a place to install
I had not been able to find a place to install the Body, so I left it for a while, but then I got up the nerve and started installing it. (This is the first time for me to install the driver's recorder on a motorcycle.)
Others have it tucked under the RearSeat but I have moved the ETC there so I can't install it.
In the end, the bracket was made to fit under the front seat.
This is because the 22SeriesBody's small type contributes to the large size, and it would have been difficult to fit it neatly in the 21Series.
The FrontCamera is mounted inside the duct to avoid contact risk when stroking and reflecting the surroundings.
Since I am not sure about double-sided pasting, I fixed it with Option EDR-P05 and the Bracket that I created.
This is thanks to Small TypeCamera and the nifty Option.
The RearCamera is also mounted on the side of the Number with the Option EDR-P04, considering the reflection of the surroundings and how SMART it is when mounted. (The bracket is too firm and heavy, so the Fender Eliminator in particular needs to be reinforced to prevent shaking.)
The Switch is installed by modifying the Switch stand of another product.
Since the switch is a Small Type, it can be attached to various places, but I think it is better to attach it to a place where it can be pushed immediately.
(Also check the operation with the light on.)
The GPS is mounted inside the Tail cowl and is received with no problems.
Camera adjustment is done with the MotoDR application, but it is also easy to use and is Large sturdy because it is wide-angle, especially if the level is firm.
The driving image seems to compensate for some blurring and looks solid and clean.
(Wi-Fi confirmation is said to be time consuming, so playback only on PC)
However, SS is easily affected by the road surface, so fine pitching on rough surfaces is not an option.
How did it feel to wear it?
The use of the Exclusive Bracket for the vehicle type and the space to easily handle the wiring of the body installation location and excess camera etc. makes it possible to install in a couple of hours even if you are concerned about the finishing touches.
For cars without Space, it is necessary to work with a sufficient amount of time, considering the prevention of Trouble.
The Microphone does not have wind cutting sound, and there is no discomfort at all when listening to it.
The price is high, but there are Merit models with GPS, which automatically set the clock and date and time, and have an app to check the running track and speed, among other things.
I have never purchased Large Land products because I am afraid of them, but I expect them to be durable, especially since they are made by Mistuba Sankowa.
I would recommend this product to anyone who is considering purchasing a DriveRecorderー.
View detail
Trusted Mistuba
[How is it used?
Mainly used for touring
Was the one you received as per Image?
Street Image
How was your experience with it?
I chose this MITSUBA product because of its compact body and reliability in case of emergency, but the Camera is the latest. (Equipped with STARVIS) I am a little dissatisfied with the fact that it is not. However, the recorded picture quality is fine.
[Points to note]
Since the Body is Compact, I don't think there will be any trouble mounting it.
How did it compare to other products?
We compared it with DAYTONA's M820WD, but there was no decisive advantage and we chose it because of the manufacturer's preference.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
OEM Parts.
The battery was bulging due to age-related deterioration.
Refurbished to new replacementBattery.
It can be used without any problem.
View detail
It was also available in TANAXSMARTRideMonitor!
I was worried that it would not attach well because it was said to be compatible with KIJIMA AD720, 1080J, Mistuba, and Sankowa EDR-11, 21, and 21G cameras, but I bought it for TANAX SMARTRideMonitorAIO-5Lite's RearCamera. I was able to install it without any modification.
The Bracket itself is thick, so it seemed solid and hard to shake.
It is a Recommendation because it can be installed Refreshing without Camera's pedestal.
View detail
MITSUBA Dora Recording Essentials
The REMOTE CONTROLLER installation of the MITSUBA DRA RECORDER is the only choice, and the Fit feeling is unquestionable, but the price is high. View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
Mounting and Wiring are
[How is it used?
Camera faces the front properly.
Was the one you received as per Image?
As pictured
Was the installation difficult?
Since you cannot access the Mirror Nut without removing the Meter panel, you will have to do a lot of killing, but you can do it if you follow the Installation Instruction Manual.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt for fixing Camera is included but not Nut
It was used for mounting Camera of AIO-5, but the hole of Camera was too small to be used.
[Was there anything that disappointed you?
Wiring Cord bare
Installation Point or hang
Meter panel is ScrewQuantity:I was able to remove 2pcs and pull out the rest by force and work without removing MeterWiring.
View detail
Lightweight Compact
I had been using an ordinary ram-mounted Arm, but when I transplanted it to the FairingBracket from its previous mount on the Handlebar, the length of the Arm became an obstacle to handling, and because it was heavy, the angle of the Arm sometimes changed due to vibration or shock. The length of the Arm was an obstacle to its handling.
That is why we changed to a short arm. The short arm is lighter than the short arm, and it also reduces the load on the base.
View detail
The installation was Large strange, but I am satisfied.
Because of ADV160, it takes time to detach Cowl and handle Wiring.
It took almost a day, but the images are beautiful.
The Bluetooth connection was also not bad.
If possible, we hope that it will not have to be used to verify the accident.
View detail
This is the MODEL for Motorcycle without load carrying capacity!
Mounted on ZX-10R.
Litter SS and recent Motorcycle are not loadable under Seat anyway.
The body of this model is smaller than the previous model, and it is a recommendation for Motorcycle.
Especially if ETC is installed, Exactly in 10R where there is really only a tiny gap. [Commendation also in R1].
I have been using Mistuba's DRA RECORDER for about 3 years with the previous MODEL and have not had any malfunctions.
Since a driver's camera is necessary in case of emergency, we really recommend JAPAN, which has a track record of reliability and performance, rather than inexpensive products such as those made in China.
When an accident occurs and the driver's recordings are verified. It was broken. If the "A" is not attached, there is no meaning to it at all.
In addition, if there are many malfunctions, they will need to be replaced or repaired each time, but in recent years, the labor cost for installing a driver's record is quite high at any motorcycle shop.
Therefore, although the product itself is expensive, it is safe and secure with a low failure rate and solid functions.
The only bad part is that you set it up with an app, but the connection to that app is not Smooth lol.
View detail
If there is no reason, this" is" good.
[How is it used?
About 7 years and 70,000 km
XGrip for Smartphone to attach Smartphone and DVR
Mounting points are around the handlebar
Was the one you received as per Image?
Simple package, somewhat rough product as per Image. I would like to say that it is heavy, but it is heavier than I had imagined from the fact that I had heard that it was made of aluminum and from the appearance of its small size.
Was the installation difficult?
The OEM Knob is simply loosened, inserted, and tightened.
If theft is a concern, SecurityKnob is available, but it is a bit bulky.
It is possible to use an Inch size nut to secure the Merit, which can be loosened and angled without the need for tools (use the nut for installation. (Use the Nut for installation, but do not over-tighten it.)
How was your experience with it?
Compared to the standard arm (https://www.webike.net/sd/21313050/) and long arm (https://www.webike.net/sd/21313048/), there is no Spring inside, but it has not come loose or come off.
Since it is the shortest Arm, I thought it would be the least likely to cause a sense of mess when attached around the Handlebar. The support length is also shorter, so it is somewhat safer.
The short length of the cable makes it less flexible. However, the position of Charger was originally taken into consideration, so there is no particular impact.
The lightest Arm components except for those with different materials
[Included Parts:were they on?
No particular product only.
[Was there anything that disappointed you?
Nothing special. If I had to say, it would be nice if Bolt wasmm Size, but there is no problem if you don't change it from the original parts.
Quantity:If you want to buy this product, you need to purchase it from RoseRose because the Set comes with a standard arm, but unless you need a standard or long arm for height or position reasons, I feel that this product is the one to choose if you are looking for lightness.
View detail
M’s Global Market M's GlobalMarket For Motorcycle
After purchasing new, I checked the front and rear Camera, up and down, before installation.
With the power on, about in the middle of the Monitor.
Green and Blue or Line was in there and I applied for an exchange.
The response was slow and it took about 2 weeks to get the Monitor to confirm.
Today, we checked the product and found that the LCD Panel was defective.
We will replace the Body and ship it to you.
I was contacted by the company, but the Monitor they sent me has scratches in it.
That sucks. !!!!
I bought new, didn't I?
View detail
Camera compatible with Motorcycle
It is the perfect camera for shooting motorcycle videos, as it allows you to shoot from a third-person perspective and rotate the camera in various directions for later review. The camera shakes a little when the mounting rod is extended, but even so, the images are not blurred at all, which is amazing.
The flip side of being able to take 360° video is that if you take a little bit of video, the File size can easily be 10GB or so, so that is a drawback. Also, since the Lens is convex, care must be taken to prevent wounds and fingerprints from sticking to it.
View detail