Motorcycle Motorcycle Camera Reviews

Filter

Write a review and get Webike Points!

Reviews

Dashboard Recorder Main Unit Fixing Bracket Only

Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]

Motorcycle Drive Recorder EDR-22 Series with GPS

Mitsuba sankowa

03 Mar 2024

Motorcycle Drive Recorder EDR-22 Series with GPS

Japanese Webike user

5/5

SS is difficult to find a place to install

I had not been able to find a place to install the Body, so I left it for a while, but then I got up the nerve and started installing it. (This is the first time for me to install the driver's recorder on a motorcycle.)

Others have it tucked under the RearSeat but I have moved the ETC there so I can't install it.
In the end, the bracket was made to fit under the front seat.
This is because the 22SeriesBody's small type contributes to the large size, and it would have been difficult to fit it neatly in the 21Series.

The FrontCamera is mounted inside the duct to avoid contact risk when stroking and reflecting the surroundings.
Since I am not sure about double-sided pasting, I fixed it with Option EDR-P05 and the Bracket that I created.
This is thanks to Small TypeCamera and the nifty Option.

The RearCamera is also mounted on the side of the Number with the Option EDR-P04, considering the reflection of the surroundings and how SMART it is when mounted. (The bracket is too firm and heavy, so the Fender Eliminator in particular needs to be reinforced to prevent shaking.)

The Switch is installed by modifying the Switch stand of another product.
Since the switch is a Small Type, it can be attached to various places, but I think it is better to attach it to a place where it can be pushed immediately.
(Also check the operation with the light on.)

The GPS is mounted inside the Tail cowl and is received with no problems.

Camera adjustment is done with the MotoDR application, but it is also easy to use and is Large sturdy because it is wide-angle, especially if the level is firm.

The driving image seems to compensate for some blurring and looks solid and clean.
(Wi-Fi confirmation is said to be time consuming, so playback only on PC)
However, SS is easily affected by the road surface, so fine pitching on rough surfaces is not an option.

How did it feel to wear it?
The use of the Exclusive Bracket for the vehicle type and the space to easily handle the wiring of the body installation location and excess camera etc. makes it possible to install in a couple of hours even if you are concerned about the finishing touches.
For cars without Space, it is necessary to work with a sufficient amount of time, considering the prevention of Trouble.
The Microphone does not have wind cutting sound, and there is no discomfort at all when listening to it.
The price is high, but there are Merit models with GPS, which automatically set the clock and date and time, and have an app to check the running track and speed, among other things.

I have never purchased Large Land products because I am afraid of them, but I expect them to be durable, especially since they are made by Mistuba Sankowa.
I would recommend this product to anyone who is considering purchasing a DriveRecorderー. View detail

Drive Recorder 1080J Recorder Internal Battery

RAM MOUNT

12 Nov 2023

M8 Bolt Base (3 Bolts Included)

Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM

Japanese Webike user

5/5

Cospa is good

Smartphone Holder is using RAM Mount.
This type is the best looking and the best way to fix it without getting in the way, so I use this type for all my motorcycles. View detail

RAM MOUNT

12 Sep 2023

M8 Bolt Base (3 Bolts Included)

Japanese Webike user

5/5

It is quite a nice attachment!

These parts replace the bolt for the Handlebar Clamp and allow the RAMMount to be installed.
I am in this state of attachment (⇒ see photo).
It was quite a challenge, but I like the way it is attached to the handlebar and it does not affect the handlebar easily.
This will be useful for attaching a smartphone or Radar or something. View detail

RAM MOUNT

10 Sep 2023

M8 Bolt Base (3 Bolts Included)

Japanese Webike user

5/5

Essential Items for attaching the Smartphone Holder to the ZX-10R.

Essential Items for attaching the Smartphone Holder to the ZX-10R.
The installation itself is not so difficult, but the Screw where it is attached is special,
It is impossible without a proper Torque wrench.
[Maybe it's just the '24 model, but...]

It also requires a locking agent, so at first glance it looks like it can be popped on, but to a certain extent it is.
Tools and equipment are sometimes necessary.

I've only been using it for a short time, but the RAM Mount system is just as good. Durability is for sale,
It is safe in the knowledge that it will not break that way unless it is defective in the initial stages. View detail

RAM MOUNT

02 Sep 2023

GoPro Mount

Fits: Others

NO NAME

5/5

Good camera mount, high quality that lasts!

The RAM Mounts designed for the GoPro do not come with the GoPro thumbscrew or the stainless acorn nut as depicted in the photographs. Instead, they ship the GoPro adapter with a nylock nut, a tiny machine screw, and a washer expecting this to be used in lieu of the GoPro thumbscrew. One can easily re-use their thumbscrew, but the Acorn nuts have to be swapped over from leftover GoPro mounts or purchased, but they are not retained in the RAM GoPro adapters! This allows the nuts to be easily lost. The rubber balls on the RAM mounts combined with the stout center assembly are the biggest selling points of the RAM mounts. It puts the other brands to shame! However, I am not a big fan of the sheet metal screws used to attach the ball assembly to the base. I could understand if it was lean manufacturing to reduce the number of specialized adapters, but almost all of the RAM mounts use the ball assembly. It would have been more secure and practical to produce an integrated ball assembly for each of the bases. That way I could still swap between mounts but bypass the need for the 2 sheet metal screws that could strip out the plastic or fail over time. I would have liked to see the ball assembly integrated into the suction cup mount. I also would have liked to see the thumbscrew included, or at least provide an acorn nut or nylock nut that is retained in the plastic GoPro adapter. This way the end user can simply reuse the GoPro thumbscrew without digging around for extra nuts. The machine screw included with the RAM mount is a smaller diameter that isn't as secure as the GoPro screw, and as a result the included nylock nut (which is too small to retain in the housing anyhow) has a smaller thread diameter that does not allow the use of the GoPro thumbscrew. It's almost as if RAM designed the GoPro adapters as a secondary after thought. I do like the twist lock suction cup mount. It provides a sturdy camera mount on glass or smooth surfaces, and the double socket arm is very secure and adjustable. Overall: 4/5 stars. I don't like how RAM included the GoPro adapter without proper hardware. The use of sheet metal screws to secure the ball assembly to the base is also cheaply done. It should have been integrated from the get-go and still allow for lean manufacturing principles. Otherwise it is a very solid mount. View detail