Reviews
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
I could use it for akeeyo's drareco.
Installation was also possible on akeeyo's AKY-958N.
However, there is no flexibility in the Screw tame.
Since I also added DAYTONA's Fender Eliminator, I chose "for Left", but "for Right" seems to work fine too.
View detail
I think it's all settled in nicely.
I think it's all settled in nicely.
The regrettable part is that
It comes with Screws for installing and fixing the camera.
It would have been nice if it was the same color as the Body anyway.
Silver on Black stands out
View detail
Used for Mistuba EDR-21 installation.
Purchased and installed on Mistuba Sankowa EDR-21 for Rear.
I looked around and chose this product.
Install RearCamera with License Plate
It looks neat and clean.
License Plate location so
The rear of the vehicle was captured perfectly without any blind spots.
Installation was very easy.
View detail
It was a little short for the REBEL 250 SEdition.
I bought this product because it is compatible with the REBEL 250, but it was not long enough for the SEdition with Fork Boots.
I thought it might be a little loose, but it feels fine for use on regular roads.
Since the Dr-Recorder is made in China, I can't use Bolt, so I use Double-sided Tape to attach it to Bracket.
View detail
EDR-21G RearCamera
I used it to mount the RearCamera on my EDR-21G.
This in itself is easy to install.
The hole didn't fit, so I bent the Bracket's Camera mounting part and installed it.
View detail
Can I use any Manufacturer's Camera?
It is a CameraExclusive Bracket, so I could install it on my Chinese Camera without any problem. I think it is good that you can choose for Right or for Left. View detail
Installation of Camera on Chinese Draco
This is not the one I wanted. However, the Drorekos I purchased had a longer rear than the screw tightening position. As a result, we decided to choose it from another manufacturer's products.
The target products are this and POSH. The POSH one requires a cheap bracket to be attached to the Drorecco, and this one can be attached with a solid sub-Bracket, which is the deciding factor.
And Quantity:Pair (for Left and Right) It's a Limit while adjusting the video to a Limit, but I avoided the Blinker and completed the installation (but it's impossible with STD Blinker). The video was taken without blurring.
It is important to note that the upper part of the License Plate Base is pinched and cannot be bolted unless it is the same size as the Plate. So I changed to KIJIMA's at the same time with this plate.
By the way, I'm wondering why you don't use Black for the attached Porto. In the picture below, it is prepared separately.
View detail
I wanted a Mistuba Sankova Draco Bracket.
I was looking for a RearCamera Bracket from Drorecamera and found this one at a motorcycle supply store.
I was not sure if my motorcycle was a Fender Eliminator, but I managed to get it on.
Probably easy to put on if it's not a Fender Eliminator.
The thing itself is pretty solid, so as long as the Nut and Screw in the mounting area don't loosen due to vibration, I don't think durability will be an issue.
View detail
High rigidity and no video blur.
I bought it to change the position of the Drorecord for the installation of the Fender Eliminator Kit.
This is for use with the Mistuba Sankova EDR-21G.
No problems with the rigidity, and it won't move when tightened up.
However, it is better not to lose the Spacer that comes with the Drorecco because it cannot be fixed firmly unless you tighten the Bolt between them.
I was thinking of using it with the Tanax Plate Hook 3, but I gave up because it interfered with it and was impossible to install it.
View detail
Used in the MT-09 RearMountCamera
As the Title says, I bought it to equip my 2017 MT-09 with a front and rear draco
It is Exactly for the Mistuba Sankova EDR-21G
This product is not only a Mistuba Sankhowa
"Mistuba Sankova EDR -11/21/21G and KIJIMA AD720/1080 J. Astro Scauper - Just Fit Design for Pio/Torus It is clearly stated that
There is no need to use the double-sided tape that comes with the Camera You can mount to the Screw hole
Quantity:Pair (for Left and Right) You can also adjust the number to some extent, so you can use the buffer between the upper part of the number and the cowl (or tail lamp) It is designed to avoid a wide range of car models … probably most car models It can be attached
With Steel and BlackPainting, you won't have to worry about strength
I think it's hard to find a place to put the Fender Eliminator-ized MODEL So it's essential in such cases
If you use double-sided tape, it will move freely, but you can use it to fix the bolts It will be
It doesn't move, and I expect the video itself to be resistant to blur (vibration)
View detail