Reviews
Fits: Others
EDR-21Gα
It took me a long time to put Wiring together nicely. View detail
Large sturdy even on Motorcycle as it is firmly fixed.
I use it on my Insta360 X3. (I'm planning to buy Ace soon, so I'll use it there as well.)
With X3, the position is so delicate that it just hits the chin of the full face, so I think other ActionCamera would have no problem at all,
The Camera is easy to put on and take off, and since it has two clasps, the Camera will not be upside down as is often the case with products that hang from the neck.
The fact that it is an official Insta360 product is also a reassuring factor.
It can be used for walking around town or in the mountains, except for motorcycle, and since the price is only 3,000 yen, one can be used for various situations and is very cost effective.
View detail
Mounting and Wiring are
[How is it used?
Camera faces the front properly.
Was the one you received as per Image?
As pictured
Was the installation difficult?
Since you cannot access the Mirror Nut without removing the Meter panel, you will have to do a lot of killing, but you can do it if you follow the Installation Instruction Manual.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt for fixing Camera is included but not Nut
It was used for mounting Camera of AIO-5, but the hole of Camera was too small to be used.
[Was there anything that disappointed you?
Wiring Cord bare
Installation Point or hang
Meter panel is ScrewQuantity:I was able to remove 2pcs and pull out the rest by force and work without removing MeterWiring.
View detail
It's not compatible with my black box
Quality and Texture Information Flat Braces Easy installation of black boxes for your environment Size Chart Information License Plate Size Cost performance and comparison with other products. There are a lot of products, but the products that I thought of WeBike packaging is always great. Arrives in a week for delivery and packaging Purchasing concerns, precautions, or advice It's a shame to only give you black box fastening bolts It certainly doesn't fit other brands' black boxes, but it's definitely fair View detail
A little processing was required.
I purchased this product to install Transcend DrivePro 20 near the handle, because the included fixture was not good enough, as it did not have angle adjustment function.
DrivePro 20 and LeFH-e 2waystyle (DriveRecorder/ActionCam) However, the result was that it could not be used as it was, and needed to be modified for use.
The DrivePro 20 has a slightly concave shape in the middle, and I felt that I could use it in the middle by shaving the protrusion on the inside of the bracket. So, I carefully shaved the inside of the bracket and the entire inside of the bracket with a router, and managed to make it usable in the middle of the bracket. Unfortunately, the Indicator Lamp was covered by the Bracket, so we drilled a 5mm hole in the top of the Bracket so that the Indicator Lamp could be seen. The bracket is now usable without any rattling, but I am a little concerned about the durability of the bracket since I had to cut the inside of the bracket.
This product is made entirely of plastic, so it is easy to process. The clasp is also made of plastic, so if you try to force the clasp to tighten by inserting an object with an incorrect diameter, the clasp is likely to break at a very high rate.
View detail
Halfway to use in Motorcycle
The concept of wearing the Motorcycle instead of attaching it to the Motorcycle itself is good, but there are some questionable points in terms of usability.
The point that it only operates for 3 hours or the low waterproof property seems to be fatal.
I can't Check images, whether it's incompatible with my iPhone or my settings are bad.
Many times I was disappointed when I saw what was recorded.
View detail
I would have liked to have continued to sell BS−10
I replaced my BS−10 that I had been using for less than 4 years when it failed.
I considered the successor model, but it had improved functionality or was considerably more expensive, so I had to settle for the BS−8c.
This is the popular version that omits Wi-Fi, GPS, and Others.
Well, that being said, the minimum requirements for a driverless camera are met, so I think this is a good thing if the price is acceptable. However, what I would like to see improved is the reliability of the Adapter−? I would like to improve it, but what I would like to see improved is the unreliability of the Adapter & minus;? The most important thing to remember is that the camera is not a "real" camera, it's a "real" camera, and it's not a "real" camera. I don't use it in Helmet, I fix it in Handlebar with Option Parts.
I have to use BS−9b to mount it on my Helmet, because the Helmet mounted Adapter− moves easily and I have to adjust the angle of view with my phone using Wi-Fi every time I use it. For now, I'm using it as a connection until I install the M company's body-mounted DVR.
View detail
Would you prefer a little further back?
I have no problem with the overall construction, but when I put it on, the Emblem looks a little far away from the Fork, so I would have liked it to be a little shorter. View detail
Arm for Ram Mount1 inchBall
I bought it, but it was a little too long, so I bought the short version as well.
Standard Arm is unexpectedly long and bounces around too much when fixed to Handlebar
The thing itself was very well made.
But it didn't suit my use.
View detail
Impressions after using it for commuting.
I am currently using it for commuting on my Motorcycle in case of an accident.
The image is not as clear as I would have liked for using image stabilization, but I think that's about it.
One complaint is that the battery does not last as long as expected, so we would like to see improvements here.
Also, when I removed the waterproof and dustproof rubber part of the back part of the body to charge the battery, the thin rubber part that connects it to the body broke off (I contacted the manufacturer and they sent me the part because it was an initial defect). (I contacted the manufacturer and they sent me a part.
We trusted JAPAN and were reassured that After Service would be done properly.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Drareco pedestal
Designed to fit the car model, Bolt On and installation is complete!
However, since the Front is matched to OEMMirror, it was replaced with ThirdParty product, so a little ingenuity was required for Camera installation.
View detail
A little too high.
It is an OEM Product, so it is perfect, but not cosmetically pleasing.
The paint job is also not good.
View detail
Note the size
Tail lamp was in the way and could not be attached. Please consider carefully before you buy. 1.5cm height plus Camera is needed on the Number. View detail
I thought it was made in Japan, but it was CHINA.
I have owned 3 motorcycles and just bought a new 250 Motorcycle, so I decided to go with Mistuba! (Large type and 400 medium size are made by Aquillo) I didn't look at the box carefully, so I looked at the unit after installation and saw that it was made by Inch China. It was a bit shocking, but it is a JapanBrand and I think the quality is good. First of all, the motorcycle I bought this time is YZF-R25, so there was not much space under the seat. This Mistuba unit is large in width but not thick, so I think it is easy to store. (Acuyo's Unit is about two Mistuba's worth, so it is a little thicker.) Wiring is very easy. I used Scotch 3M Tape for car exterior because the double-sided tape that comes with the camera is not very adhesive and may peel off. The response to IgnitionOn is fast and the quality seems to be good even though it is from CHINA. I always think that when I install a Motorcycle camera, whether it is Acuyo or Mistuba, the Wiring from Unit is too long. What is wrong with long wiring is that if you leave it as it is, the wiring gets messy and dirty under the seat, so you have to tie the cord together with a tie band. Even if you put it all together, the wiring is still long, so you have to use Emon's Relay1.Quantity:It takes a little Space for about 5pcs. To install the result, you will need to use the DrarecoUnit+Wiring Summary×Quantity:2pc. Since space for a set is required, it may be difficult to install for those who ride a large type SUPER SPORTS750, etc., which do not have enough room under the seat. My YZF-R25 was neatly put together using D-UNIT, and it seems to fit under the Seat in the Limit. I think it is good to be able to view the recordings on my phone, but I don't really know how to use a phone, so I would like to see an app that makes it easier to understand. I would like you to make the app easier to understand. However, Mistuba is the only company that I can trust for the quality of the DVR, so if I buy a DVR for my motorcycle, it will be Mistuba's product by all means. I didn't know that Mistuba's DVR was available and bought a Chinese AQUILLO DVR for about 24,000 yen, which was a waste of money. It would have been a disaster if I had an accident and it didn't capture the incident, and I'm afraid that the Acuyo would break while I'm using it. View detail
quite messy
Used on 10R, glad to be able to use it since the car model has few options for mount position.
With 10R, short arm could not be used due to interference, standard or long arm is better.
Some reviewers say that the bolt does not fit, but the M6 bolt is included, but in my case, the length did not fit.
The bottom of the Screw hole is reached, so the short Bolt owned by the company is used instead.
I didn't use it, but the color that comes with it is Material:Plastic and concerned about durability.
The finish is quite dirty, as is the case throughout the Ram MountSeries.
The right-angle, square structure makes it unattractive and bulky.
View detail
How about the fact that the Microphone is built into the body?
Purchased because it is the latest MODEL.
I have been using it for about a year and the operation itself is fine.
I enjoy checking videos on my PC using a dedicated application.
However, only the Engine sound is recorded as audio.
Since the Microphone is built into the Body, external sound is drowned out by the Engine sound near the Body, rendering it completely useless.
It will not be possible to record without exposing the Microphone portion (i.e., part of the Body) from the Motorcycle, even if it is not near the Engine.
Microphone can be built into the REMOTE CONTROLLER or completely separate.
Also, I am not surprised that the Camera is not a STARVIS Type, considering the timing of its release.
I try not to drive at night as much as possible because I am a motorcyclist, but I would like to have a camera to monitor parking.
Based on the above, we believe that this product is worthy of comparison with other companies' MODELs.
Finally, it is Good that MistubaBrand's SDCard is on the market.
If the memory is a fake brand product with a short life span, it would be a disaster, even though it is a DriveRecorder for emergencies.
View detail
For RearCamera, a driverless camera
I was looking for one for my RearCamera for my DoraRecco and found it.
I am very satisfied with the large size of the product, which is securely fastened to the Fixing Screw of the License Plate without any fear of falling off.
View detail
The picture is good, but …
I chose one that would project properly.
But the connection to the app is slow and Response is bad.
Also, for some reason I can't set my watch.
That messed up the time.
So far it has not been easy to use.
I just need to be in the picture in case of…
View detail
Just right for a driver's recorder.
For storing DriveRecorder data.
It is an ordinary small SDCard. It is inexpensive and 8GB is not so much of a problem.
A special case is also included to prevent accidental loss.
View detail
Fits: Others
I bought it thinking it was a good luck charm!
Recently I have been feeling the need for a driver's license recorder due to various problems. I decided to purchase one for my own protection. The installation itself is easy and the instruction manual is very helpful. The app for smartphone is also very easy to set up. The images are clear and I think I made a good purchase. (^O^) View detail