Reviews
M’s Global Market M's GlobalMarket For Motorcycle
After purchasing new, I checked the front and rear Camera, up and down, before installation.
With the power on, about in the middle of the Monitor.
Green and Blue or Line was in there and I applied for an exchange.
The response was slow and it took about 2 weeks to get the Monitor to confirm.
Today, we checked the product and found that the LCD Panel was defective.
We will replace the Body and ship it to you.
I was contacted by the company, but the Monitor they sent me has scratches in it.
That sucks. !!!!
I bought new, didn't I?
View detail
Camera abnormality immediately after opening the package.
After opening the package, I connected the battery and checked the operation, but the Camera error message kept blinking and I could not record. View detail
It interferes with the Fender Eliminator and is unusable.
In the picture it looked like it was attached to a Fender Eliminator on a Z900RS, so I bought it thinking I could attach it without any problem.
However, in reality, as shown in the photo, the angles do not match and there is too much interference, making it unusable.
There are a wide variety of Fender Eliminators for the Z900RS, but mine is an Active product.
Active's Fender Eliminator differs from other Manufacturers in the number angle and the distance between the Lamp and Number.
I think it's because of the proximity. But Active's Fender Eliminator is the most beautiful because there are no weird gaps.
I'm not sure if I should return it.
If you are a Fender Eliminator and the Lamp and License Plate are close to each other, please be careful.
View detail
Fits: Others
Garbage
WiFI connection does not work properly.
Works properly to begin with. (Recorded) local
...I found out it was broken.
I connected it as per the manual and the battery went up.
Dishonest response when contacted by Support.
Not worth buying.
View detail
Lens is slender. 6 months OR distortion or condensation when driving on roads with temperature differences.
When you cross the Hakone Pass on Route 1, the condensation orLens is distorted.
The first time I was able to get an initial response, but it happened three times in a row.
Just passing through Hakone Pass on Route 1 or near Ashikaga SA on the Tomei Expressway on a day when there is some temperature difference can break it.
It is vulnerable to condensation and should not be bought.
If it is only for town driving and mainly driven in places where the temperature does not change much, it may be Large sturdy.
View detail
Salt response to initial defects
While there is also the product of the Fat Manufacturer of about 10,000 Yen, in order not to be troubled with the thing which does not function in the case of emergency, I dare to choose DriveRecorder of EduRans which is not cheap.
Before installing it in the vehicle, I checked on my desk to see if it worked properly and found that the Rear image was distorted and the recording was also recorded in a distorted manner.
I put the product back in the box and asked to return it, but was informed that they could not respond unless they could confirm the symptoms through inspection.
I reassembled it on my desk and turned it on again, assuming that I would have to prove the symptoms later, and the same symptoms appeared.
In addition, in the second verification, the disturbed Rear image was displayed in Red color.
Document the symptoms with photos and video and send the goods back for inspection, which the Manufacturer says will be done.
One or two weeks later, the manufacturer informs me that they cannot accept the return of the product because they cannot see any symptoms and that they will send the product back in its current condition.
The Button is also hard to push, and it is a product that I lost interest in installing in the vehicle. I wrote this so that the number of riders who feel the same way will not increase.
If you are referring to our products, we recommend that you select them after careful consideration because there are products of other manufacturers in the same price range.
View detail
Falling while driving
It's easy to install, but one month after I put it on, the screw came off while driving and the Smartphone Holder fell off.
I didn't tighten it because I thought it would still be Large strong.
The Smartphone Holder and Ram Mount were broken by a car stepping on them, and I am very scared to think that I would be wearing my phone.
This product can be used on BrakeReserve tank, but it is your own responsibility. Of course, you need to tighten the screw and use the screw lock agent.
I decided that I would never put myself in this place again.
The model is C650GT.
View detail
100% Material:Plastic
I thought it was made by the genus Gold and bought it for an extension.
It was All plastic.
If you tighten it too much, it will break, and if you extend it too far, it will just shake with the vibration of the motorcycle, so it is not recommended.
View detail
It only shakes when it is coupled.
Medium. View detail
Screw thread does not fit. Purchase separately at home center.
The Screw Mountain is not compatible with Japan's single car.
So Screw needs to be purchased separately from Home Center.
Model:REBEL250
View detail
Be careful when you remove it
After installing it, it was too spinning and unstable, so I loosened it up to try to take it off … only the Nut mounted on the back drops to the ground from within the Center bolt
Only the rubber remains in the bolt and cannot be taken out It is not possible to use it anymore
The description does not allow you to inject into the center bolt However, if you cut it into smaller pieces, it will spin around
I had no choice but to buy a different Base and use double-sided tape and Tie Wrap I use the top portion of the system in a fixed position
View detail
We've dropped out
The most important pedestal is the Material:It's only weak because it's Nut embedded in plastic products! And since it's a W-series Screw and Motorcycle product, I'd like to see them use the M-series at least
I've tried a few different types of Clamp
The Screw part is weak to vibration, so it may come loose in a short time, fall off, or lose its angle should not..
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Even if attached - - -
Neither Screw Mountain mm nor InchScrew came
Do not enter without Cut Screw - -
Body is attached, what is GRU going around?
Take it to the store and finally install it
Can you use it? - - - S not inclusive
View detail