Reviews
I wanted this.
In the case of a normal Arm, the direction in which the Arm moves in relation to the Base and the direction in which the phone moves in relation to the Arm are the same, so if you want to point the phone at yourself, even though it can swivel slightly, the mounting location is limited. However, if you want to connect two short arms with a ball, it will be very large.
I used to ride a Valkyries that had a large handlebar and windshield, so I was able to get away with it, but I switched to a Bolt that had a small handlebar and windshield, so I found this product when I was wondering where to install the Base. If not for this, I would have only been able to mount it in a way that would have made my phone stand out quite a bit.
The purchase price was 2530 yen. It has more parts than the usual two short arms (1320 yen), so I think it's pretty inexpensive.
View detail
Fits: Others
It's as good as I expected.
As for durability, I don't know yet since I just installed it, but I am fully satisfied. View detail
Fits: Others
Unique Camera Bracket made by Genus Gold
I installed it on the Scooter that I use for shopping, etc.
At the time, I bought it at a supply store instead of Webike because they offered a Large capacity SDCard in the store as part of a campaign.
At the time of purchase, I had a DAYTONA DDR-S100 attached to the front of another motorcycle, but I chose this Scooter because I can fit the body in the helmet, and there are also ones with GPS, but since I run around the neighborhood, I don't have GPS. I chose this one because it can be used as a front and rear 2 cameras.
The body is attached to the inside side of the helmet with double-sided tape.
The GSensor is oriented so that the SDCard slot is on the bottom of the Helmet in, which makes it difficult to remove the SDCard, but unlike the DDR-100, the video is overwritten on this Dramera, so I can replace the SDCard and use the smartphone app to format it. However, unlike the DDR-100, the video is overwritten, so I can change the SD card or use the smartphone app to format it, so I think it's okay to leave the card in.
Also, since the recording microphone is on this body, if you put it on the Scooter Helmet in, you may not be able to record anything, or you may only be able to hear the engine sound. I decided that it would be better if I could get video.
I installed the front camera on the bottom of the front cowl and the rear camera on the bottom of the rear box.
As a result, the Cable of the rear Camera was not long enough due to its handling.
The EDR α is the same as other Dr-Recorders (I only know about DAYTONA DDR-100 and MiVue M777D), but the bracket is attached with double-sided tape, but the others are not Material:The good thing is that unlike the Plastic Bracket, the Camera Bracket that comes with the camera from the beginning is made of Gold.
Since it belongs to the Gold family, you can use Pliers, etc. to create angles and curves on the glued surface of the bracket, so you can attach the camera to not only flat surfaces, but also to the folds of the cowl, etc.
I don't know about the valley-fold part, but I was actually able to mount the Camera on the front cowl at the center of the vehicle.
It is also good to be able to check Camera images on the phone app, but unfortunately this app is not compatible with iPod touch, although it is compatible with iPad.
View detail
As a matter of fact.
The tank cover is floating a little too much.
I bought it to physically hold it down (laughs).
Just the front part of the Cap.
But if I'm going to buy one, I'd prefer a Ram Mount product (laughs).
You can mount it in many ways. It's very promising.
In. I think.
Small size is marked for Honda.
It's definitely Large Size.
I don't know why it's happening, but...
Considering the size of the tank cap.
I know it's obvious.
That's the trap (laughs).
So. Of course it's not the M5 cap bolt.
I use the M6 and M4.
And if it's M6, you might want to widen the hole a bit.
That part of it is strange.
View detail
Fits: Others
As a record of Touring.
[Usage]
I installed this as a precaution against the possibility of Troubles.
It's usually fun to look back on my runs in Touring and Winding.
[What you received is as per Image.
It was as described in the product description.
The body was surprisingly small, which was a big help. (SC80) The Limit will fit under the Rear Sets of
[Try it.
In the event of an emergency, even the number of the relative vehicle is well resolved.
I will be careful not to use the video in Trouble.
Playback is available in Front, Rear, Map, and 3-Direction G in Downloaded PlayerSoft.
Since it is equipped with GPS, you can look back on your touring with a map and a video, which is very interesting.
Setting up Body is easy to do with your smartphone.
You can also check the video on your phone, but it's just to see if the recording is saved or not.
(Points to note)
If the FrontCamera is mounted directly below the Light, the Front maintenance stand may become unusable.
After turning Ignition on, make sure the Indicator on the Switch is lit blue (recording).
I don't know why, but the MicroSDCard works with SanDisk's UltaraSeries, but it can't communicate with the phone.
Tracksend products work fine up to 256GB.
When inserting and removing the MicroSD card from the body, be careful not to let the card fly away because of the strong spring of the slot.
Compare with other products
The resolution is higher than the Camera-integrated driving recorder I used to use.
It has a full range of playback soft functions.
The recording time for each file is only 30 seconds, so extracting the video is cumbersome. 5 minutes would be fine.
If you are not confident about keeping your wiring SMART, it is better to leave it to the Shop.
View detail
Fits: Others
I knew I had to have a DVR!
It'll be a front and rear Type Dr-Recorder from Mistuba Sankova!
Recently, agitated driving has become a social problem, so I installed this product to protect myself as well.
Nice to have a Wi-Fi connection to my phone and be able to check the video on the fly!
The body is so small that it just barely fits under the GSX-R1000R's rear sets.
The image is beautiful and the LED signal is well supported.
The images are quite beautiful even at night and will be useful as video evidence in the event of an accident.
View detail
For RearCamera!
I've installed it to fix the RearCamera on my Mistuba Sankova front/rear drrorecorder!
I can install it without any problems, so I recommend it to anyone who's going to install a Dramalec!
View detail
RAM MOUNT Ram Mount Long arm
Purchased for use with ActionCam View detail
RAM MOUNT Ram Mount Standard Arm
Purchase to attach Navigation and Camera
It's solid and safe.
View detail
For fixing the Handlebar
I had been using a DriveMan with a helmet, but the weight of the camera began to strain my neck, so I bought this Adapter for use with a Handlebar.
It has a wide range of pipe diameters, so you can install it not only around the handlebar, but also on the bumper, side case bracket, and many other places.
I am using it attached to Handlebar for now.
The mounting surface on the pipe is covered with rubber to improve adhesion, but I also wrapped a rubber plate around the handlebar to improve adhesion and prevent vibration and wounding.
However, to attach the DriveMan Body, you will need an additional optional Adapter.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
I love it!
I wanted to refreshing the Handlebar area, so I changed from Clamp on Pipe Handlebar to this product.
As we had hoped, we were able to achieve a lean Refreshing feeling.
I like that the Screw is available in three different lengths.
View detail
It's very nice.
I had been using the Regular type length, but wanted to make the Handlebar area Compact, so I bought this one. I like it a lot. View detail
RearCamera will fit Refreshing!
I use it for my Mistuba Sankova drrorecorder.
At first I thought that RearCamera is better from the side of License Plate, and I installed OEM Camera Bracket (NanBar mount) of Mistuba Sankowa, but I chose this one because it covers Blinker.
To tell the truth, this had been put in the choice from the beginning, but from the fact that I have made Fender Eliminator, thinking that the space of installation cannot be taken, I selected the one of putting out horizontally, but with Compact more than I thought Camera of Mistuba Sankoowa, it turns out that there is enough space It turns out that there is space, because the one which puts out from the top does Refreshing, it became the purchase again.
Because the Number angle of Fender Eliminator is sleeping considerably, I thought that it was severe in terms of the angle of Camera, but because the installation angle of Camera was also relatively free, it was possible to install Limit without bending.
I hope it's black. It would be nice if they were black. I painted them black after I installed them.
Refreshing around the License Plate, too, and it is highly satisfactory.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
It's nice
When I fix my phone around Handlebar, I have to move my eyes down, so I always fix my phone around Mirror so that I can move my eyes as little as possible.
I think that this consumption is very good because it can be fixed firmly with a small space because the Parts itself is also small.
View detail
Fits: Others
well-preparedness means no worries
I'm scared of the public road environment, which seems to be getting worse every year, and I'm introducing it along with Return after 9 years.
The Baron Red, TDK, and Aioi co-developed Drarecorder seemed to be convenient, and it was lost, but since the wage is high, it is here.
I purchased the following for installation
OEM ActionCamMount Compatible Adapter
Base mount for REC Mount REC-B28 (M6) Bolt
Emon Terminal set
NITOMS Acetate Cloth Adhesive Tape
The FrontCamera had a screw hole in the UnderBlanket at first, so I put it there.
I reconsidered and moved it to the front cowl stay because it had a wide angle of 162 degrees and the Cowl was cutting the angle of view.
Because there was not the place where RearCamera could be installed elsewhere, it pasted it on the Fender upper part.
It's right under the tail lamp, so I checked the video at night and it didn't affect it.
The position adjustment is also marked on CameraRear, so if you can see it, I think it's pretty easy!
I checked it with my phone, and it works just fine.
GPS is attached to Cowl Bracket and Switch is attached to Top Bridge.
The power supply is direct battery connection and ACC power supply.
The latter is also wired from the Tail lamp due to its installation location.
SS900 (01) The yellow line in the service manual is the power supply.
While confirming the power supply, I interrupt it with Emon's WiringConnector!
By the way, this Connector is only crushed by Pliers, so you don't need a special tool and it is convenient!
Body is attached to the side of Seat frame
Wiring is Refreshing between Fender panel and Frame.
Space under the Seat is easy and large, which is not suitable for a Sports Motorcycle.
You can also remove Seat from Battery and just raise Tank.
I'm not going to pay 30,000 over labor for such an easy job...
As for the feeling of use, the image quality is good both in daytime and nighttime.
I was a little concerned about White jumping on sunny days, but I feel like it's a waste of time to use it just for the drive recorder!
However, it is delicate to open the hard waterproof lid every time and take out the SDCard that doesn't come out and use it.
No problem with shaking due to vibration as long as it's attached to a proper place.
View detail
Fits: Others
I'd say Dramalec is a must have!
A little tricky the other day. "Stirring." so I decided to put on a Dramalecorder as a precaution.
It is a DIY Challenge because the installation costs a lot of labor.
I have D-UNIT in for installation, so it's not that hard.
However, it is necessary to process the connection terminal part of Dr-Recorder in order to connect the power line of Dr-Recorder and D-UNIT.
The BlackCable and the BlueCable need to be processed, and I used Electric Works Pliers to bite the Bullet Terminal.
RedCable is used as is, so there is no need to process it.
I connected the Minus wire of the BlackCable to the Minus wire of the D-UNIT, the IG wire of the BlueCable to the Plus wire of the D-UNIT, and the Plus wire of the RedCable to the Plus (bac direct) of the Battery.
If you do a Net search, you can find many ways to connect these areas, so I referred to them.
The Body was installed where the ETC is housed to see if it would be better to have a place that doesn't move.
The Wiring of the front and rear Camera took about 5 hours in all, although I removed the Cowl and took it around. The fact that time is taken in this area is probably the place where the labor charge becomes high. Because it is the work which the amateur does, it is not possible to do beautifully, but I enjoyed it considerably.
I bought a special mounting bracket for the back Camera. In fact, I wanted to put it on the License Plate, but because it was too narrow to fit in the Fender Eliminator, I installed it on the Bracket (Camera Bracket for Mistuba Sankoowa EDR) which I put out from the side of the License Plate. Because Camera was smaller than I thought, I think that I can install it on License Plate, so I will try it when I have time.
After I installed the camera, I thought that the car behind me would keep more distance from the car at traffic lights because it is a deterrent.
The images are quintessentially beautiful. I have to make sure I don't end up using it in an accident, but I'm going to try it next time I'm on social media.
View detail
For EDR-21's RearCamera
I tried to make my own with EmonBracket, but if you have such a good bracket, there's no reason not to use it. I was able to mount the RearCamera on it. It was easy to adjust the angle of view. View detail
You don't have to worry about where to fix it.
[How is it used?
I used this product to fix the RearCamera in order to attach the DriveRecorder to the Motorcycle.
Installed model is YZF-R15 (MODEL in 2012) This is a MinorMotorcycle, but the license plate is the same as other motorcycles.
How was your experience with it?
I used it to fix the Dr-Recorder of the unidentifiable Manufacturer of China sold in a certain ShoppingSite.
This was a happy miscalculation, but the position of the holes in the bracket and this product are Exactly the same. (Although it's made with long holes for easy installation.) It was
I was able to attach it perfectly using the included fixing Bolt and Nut, so I'm happy.
After checking out the video, I thought I had made a good purchase with the smallest amount of shake necessary.
How did it compare to other products?
I compared it with KITACO and Posh face's Drraco Bracket.
I chose this product because it had a good rating and the installation image was easy to understand.
【Review】
Bolt nut for mounting was also included and the angle and accuracy was perfect.
At any rate, if you buy DriveRecorder, I think that Rear stay is indispensable though it doesn't matter what kind of thing.
I have several motorcycles, so I also bought a DAYTONA drum recorder as a comparison, but its shape is a little different from the Bracket. I thought it was the same thing, but it's not. Sweat
View detail
Fits: Others
Fallen cannibals
In the case of an accident with a four-wheeled vehicle, it is often "Motorcyclists are worse. I think that there is a tendency to think that it is. After installing this camera, I had a sense of security as if I had a backing in case of emergency. Well, it would be better if the emergency never comes.
Installation was easy with a clear instruction manual.
As for the power supply, I used Flat Type Fuse Power Supply of Emon, and replaced it with Fuse of ACC power supply of Fuse box.
The front and rear camera wiring is quite long, so you need Sense to get around Beauty.
I'm still playing around with using it as a replacement for ActionCam.
I will try to drive safely so as not to be useful.
View detail
Easy installation of the Dramalec
I used it to install EDR-21 on Ninja250.
I asked the Motorcycle shop to install the Dr-Recorder, but I think they are prepared to install the Bracket itself.
View detail