Reviews
Purchased due to malfunction
It has been about 2 years since I purchased Income. I bought it to try it out because I was the only one who was having trouble with Noise when I was using it.
I was hoping that it was not a malfunction of the Body, but when I tried to use it, I was able to hear it properly.
I think the cause of the failure is that Helmet was used with the speaker left inside even when Income is not in use. Considering the heat during the summer, it may have been a state of considerable overuse.
So you might want to leave it off when not in use.
View detail
For the use of Income.
I have been using a btx2 pro s with a SZ-RAM4 and bought it with Speaker so that I could use it with my new SHOEI Z-8. I was so attached to the SZ-RAM4 that I couldn't bear to retire it, and since I would likely want to use Jet in the hotter months, I decided to keep it too. I decided to keep it, and the question arose as to what to do with Income.
When using Income, the Microphone is available in Included Parts:for full face, and it is sufficient to use the unused one in Included Parts:for the mounting Clamp, but the Speaker and SlideMount need to be replaced or newly prepared each time they are used. However, the Speaker and SlideMount need to be replaced or newly prepared each time they are used.
I thought about changing the Speaker and SlideMount for each season, but I decided to purchase the Speaker and SlideMount because it is troublesome to take off the interior and put on and off each time, and if I just attach the Body, I can use different Helmets depending on my mood. I decided to purchase a Speaker and a SlideMount.
For installation, we decided to use double-sided tape to attach the outside of the clamp, which was not used in the Included Parts:section, to the helmet, but the SlideMount, which we purchased additionally, does not come with two screws to fasten it to the clamp, We had to think of a way to fix it to the Clamp. At first, I was thinking of using one screw for each SZ-RAM4 and Z-8, but I didn't want to damage the screws by applying excessive force, so I decided to prepare screws. However, this was not the Size sold around the corner. I had to buy a clamp to attach the screws, and it cost about 2,000 yen for two small screws. I had no choice but to use the regular screws for the Z-8, and for the SZ-RAM4, which is likely to be used less frequently, I removed the Clamp once, removed the Screw holder from the Clamp, and fixed the SlideMount to the Clamp with 2.5mm diameter Screws and Nut to make it ready to be used. The Clamp was removed and the Screw holder was removed from the Clamp.
As for the wiring, in the SZ-RAM4, the wires were placed inside the helmet, crossing the edge of the helmet, so it was necessary to protect the wiring from damage when the helmet was placed on the ground, etc. In the Z-8, the wiring could be pulled inside the helmet without passing through the point where it hits the ground, etc., so no protection was needed. However, with the Z-8, it was possible to pull the wiring inward without passing through the point where it hits the ground, so no protection was needed, and the wiring was well concealed, making it look very refreshing.
After installation, it works fine and I can now use Income on my Z-8. For this gold price, I would like to see at least a Screw included in the kit.
View detail
For the use of Income.
I am using btx2 pro s with SZ-RAM4 and bought it with Mount to be able to use it with my new SHOEI Z-8.
SZ-RAM4 has been in use for about 8 years, and it was time to retire it, but we decided to keep it because we were attached to it and could not bear to throw it away, and also because we would want to use Jet in the hot season.
In order to use the Income, the Microphone is available in the Included Parts:for full face, and it is sufficient to use the unused one in the Included Parts:for the Mount, but the Speaker and SlideMount need to be replaced each time they are used or prepared anew. Speaker is attached with Magic tape, and there is a spare tape included, so I thought about changing it every season, but later I thought it would be too much trouble and I might leave it on one side or the other.
The Z-8 has a recess for mounting the Speaker and a cutout to release the Wiring, kindly designed with Income mounting in mind.
The recess for mounting the speaker has a diameter of more than 40mm, and this C1294.10 would have fit just fine if it were a normal round type, but since the body is egg-shaped, it was a shame. By the way, it did not fit into the recess, and the One Side floated. It doesn't hit my ear and Magic tape seems not to come off easily because it is half attached, so I will use it as it is for now.
The sound level is sufficient for listening to music while riding a motorcycle. I was not dissatisfied with the sound of the SZ-RAM4 I had been using, but with the new Z-8, perhaps because the speaker is closer to my ear than with the SZ-RAM4, I feel that the volume is larger and the wind cutting sound is less and much quieter, so the sound has been improved. I felt that the sound was better.
I can't wait to go touring with my new Helmet.
View detail
replacing by buying something new
I purchased the mounting Clamp I was using because it had finally cracked after being reupholstered so many times.
I have also used a clamp that is inserted into the helmet, but two of them became useless due to the lack of strength of the plastic where it is inserted into the helmet, so I chose to use the double-sided tape attachment method.
The adhesive strength of the new product is as strong and secure as you would expect.
View detail
To replace Helmet
Used with MIDLAND BT X2 PRO S.
I bought this to port Income when I bought a new Helmet.
It includes the base in the image, 4 Screws, and a HEXWrench.
BT X2 PRO S also has a Clamp type pedestal, but in the end, this Paste Type attaches securely & SMARTLY.
As long as it is properly degreased before application, there is no risk of it peeling off.
The last one was used for less than 3 years. It was stuck on without any sign of peeling off.
(In addition, the paste surface is slippery Type.)
In order to follow the curved surface, joint parts should be bent and Habit attached before pasting.
The adhesive is very strong, so it is necessary to warm it up before removing it. It is recommended to warm it up before carefully peeling it off. It is recommended to warm it up before peeling it off.
View detail
Speaker hole for Small Helmet
I bought this speaker because the standard speaker of BTX1PROS is too large to fit in the speaker hole of ZENITHHelmetYJ21.
It is thicker than the standard Speaker, but it fits Exactly in the Speaker hole and I am satisfied with it without any discomfort.
It is sufficient because I am not particularly concerned about sound quality since my main use is to listen to Navigation audio and to make calls on my smartphone.
View detail
It's arriving fast!
I think the product itself is expensive, but it helps that We-Big carries Aftermarket parts. Every time, from order to shipment to arrival, it's fast! This item was also ordered and it took 2 days from order to arrival! View detail
You don't even have to worry about the thickness
According to the specs, it is slightly thicker than the Standard Product, but When I installed it, I hardly noticed it
The cover of the speaker is also very close to the ear unlike the crude one of the Standard Product is good
Sound quality is adequate
View detail
Cost is high
I installed it on the Momo Helmet as a spare, but I was very impressed with the fact that it fits Exactly like an OEM The sound quality is of a very high level for this kind The sound quality is of a very high level for this kind of product However, the price is a little high for this product View detail
It's a good one
After purchasing the body, I wanted to use it for another Helmet The sound quality is good and the price is very reasonable If you are thinking of buying the Body, I would recommend you to buy the Body for another Helmet or for your family I think it would be cheaper to buy the double pack as a result View detail
From low to high range Balance Good nature
The sound quality of the BT-X2-Pro's StandardSpeaker is weak in the low frequency range, and with the kinkin
Ears tired when you are using for a long time because it only stands out in high frequencies.
Also during traveling you may feel that the bass is particularly weak and want to increase the volume,
It was a state that spurred the ear tiredness.
Speaker here is good from low to high range Balance
There is no need to raise the volume excessively while driving.
Sound quality is slightly higher than Earphone and the same etc. Because it is Level
I think that it is a category of considerably high sound quality as Income.
Speaker's thickness will be slightly thicker so there is no margin around the ear Helmet,
If you are wearing a helmet of Size Size,
Caution may be necessary for those in the ear of Large.
(BT-X2-Pro's StandardSpeaker is very thin and thin if you remove Cover)
Price is also cheap Recommendation, why not do this as Standard - - -
I thought that Cost performance was 3 points.
View detail
MIDLAND Sound quality Up necessities
Buy BT-NEXT-PROStandard Speaker because it's too bad..
Within this, sound quality is good inside B + COM and etc. It will be.
Speaker's Large Kimono, the thickness is also wrong.
Cheap MODEL As a bad day, BT - NEXT - PRO seems to be OK even with Standard.
View detail