Reviews
Used for SHOEIEX-ZERO
This size is ideal for helmets that do not have speaker holes like EX-ZERO and have no space in the mounting position.
I have used the standard Speaker and the thin Speaker, but the Smallest is the thinnest and the sound quality is the same as the others.
The price is a bit high, so IncomeQuantity:It would be appreciated if the Speaker of the Set could also be selected.
View detail
Purchased due to malfunction
It has been about 2 years since I purchased Income. I bought it to try it out because I was the only one who was having trouble with Noise when I was using it.
I was hoping that it was not a malfunction of the Body, but when I tried to use it, I was able to hear it properly.
I think the cause of the failure is that Helmet was used with the speaker left inside even when Income is not in use. Considering the heat during the summer, it may have been a state of considerable overuse.
So you might want to leave it off when not in use.
View detail
Nice detail but good ??
I like it because it's easy to dress up and immeChain ??
However, it sometimes hurts that most of the colors are out of stock….
View detail
Change your clothes according to your mood ^_^.
There are many colors to choose from, and you can change them according to your mood. View detail
For the use of Income.
I have been using a btx2 pro s with a SZ-RAM4 and bought it with Speaker so that I could use it with my new SHOEI Z-8. I was so attached to the SZ-RAM4 that I couldn't bear to retire it, and since I would likely want to use Jet in the hotter months, I decided to keep it too. I decided to keep it, and the question arose as to what to do with Income.
When using Income, the Microphone is available in Included Parts:for full face, and it is sufficient to use the unused one in Included Parts:for the mounting Clamp, but the Speaker and SlideMount need to be replaced or newly prepared each time they are used. However, the Speaker and SlideMount need to be replaced or newly prepared each time they are used.
I thought about changing the Speaker and SlideMount for each season, but I decided to purchase the Speaker and SlideMount because it is troublesome to take off the interior and put on and off each time, and if I just attach the Body, I can use different Helmets depending on my mood. I decided to purchase a Speaker and a SlideMount.
For installation, we decided to use double-sided tape to attach the outside of the clamp, which was not used in the Included Parts:section, to the helmet, but the SlideMount, which we purchased additionally, does not come with two screws to fasten it to the clamp, We had to think of a way to fix it to the Clamp. At first, I was thinking of using one screw for each SZ-RAM4 and Z-8, but I didn't want to damage the screws by applying excessive force, so I decided to prepare screws. However, this was not the Size sold around the corner. I had to buy a clamp to attach the screws, and it cost about 2,000 yen for two small screws. I had no choice but to use the regular screws for the Z-8, and for the SZ-RAM4, which is likely to be used less frequently, I removed the Clamp once, removed the Screw holder from the Clamp, and fixed the SlideMount to the Clamp with 2.5mm diameter Screws and Nut to make it ready to be used. The Clamp was removed and the Screw holder was removed from the Clamp.
As for the wiring, in the SZ-RAM4, the wires were placed inside the helmet, crossing the edge of the helmet, so it was necessary to protect the wiring from damage when the helmet was placed on the ground, etc. In the Z-8, the wiring could be pulled inside the helmet without passing through the point where it hits the ground, etc., so no protection was needed. However, with the Z-8, it was possible to pull the wiring inward without passing through the point where it hits the ground, so no protection was needed, and the wiring was well concealed, making it look very refreshing.
After installation, it works fine and I can now use Income on my Z-8. For this gold price, I would like to see at least a Screw included in the kit.
View detail
For the use of Income.
I am using btx2 pro s with SZ-RAM4 and bought it with Mount to be able to use it with my new SHOEI Z-8.
SZ-RAM4 has been in use for about 8 years, and it was time to retire it, but we decided to keep it because we were attached to it and could not bear to throw it away, and also because we would want to use Jet in the hot season.
In order to use the Income, the Microphone is available in the Included Parts:for full face, and it is sufficient to use the unused one in the Included Parts:for the Mount, but the Speaker and SlideMount need to be replaced each time they are used or prepared anew. Speaker is attached with Magic tape, and there is a spare tape included, so I thought about changing it every season, but later I thought it would be too much trouble and I might leave it on one side or the other.
The Z-8 has a recess for mounting the Speaker and a cutout to release the Wiring, kindly designed with Income mounting in mind.
The recess for mounting the speaker has a diameter of more than 40mm, and this C1294.10 would have fit just fine if it were a normal round type, but since the body is egg-shaped, it was a shame. By the way, it did not fit into the recess, and the One Side floated. It doesn't hit my ear and Magic tape seems not to come off easily because it is half attached, so I will use it as it is for now.
The sound level is sufficient for listening to music while riding a motorcycle. I was not dissatisfied with the sound of the SZ-RAM4 I had been using, but with the new Z-8, perhaps because the speaker is closer to my ear than with the SZ-RAM4, I feel that the volume is larger and the wind cutting sound is less and much quieter, so the sound has been improved. I felt that the sound was better.
I can't wait to go touring with my new Helmet.
View detail
Required when using different Helmet depending on Motorcycle
It is convenient to purchase multiple Bases so that you can use multiple Helmets. View detail
replacing by buying something new
I purchased the mounting Clamp I was using because it had finally cracked after being reupholstered so many times.
I have also used a clamp that is inserted into the helmet, but two of them became useless due to the lack of strength of the plastic where it is inserted into the helmet, so I chose to use the double-sided tape attachment method.
The adhesive strength of the new product is as strong and secure as you would expect.
View detail
It was saved.
I purchased a new Helmet.
I think it is LiNori that I don't have to buy the whole IncomeBody, but I felt it was a bit pricey.
View detail
It was saved.
I purchased a new Helmet.
It was quite helpful not to have to buy the entire IncomeBody.
View detail
To replace the Helmet on DT-E1.
Purchased Wiring and Speaker to mount on two different Helmets.
Only the Body can be replaced, which is more convenient.
View detail
Double-sided tape is peeling off,
Double-sided tape peeled off due to the weight of the IncomeBody for a long period of time, and the IncomeBody needed countermeasures against falling. View detail
This is my second purchase!
This is my third IncomeBody, including the Body, and it is very useful because I can easily port it to multiple helmets with just one IncomeBody. (as a prerequisite that Body likes it). In terms of price, I chose this one because it costs about 8,000 yen, which is cheaper than the less expensive Income. As for the installation, I installed it in each of the three manufacturers, ARAI, SHOEI, and CUBT, and it was easy to install in all of them. I am generally satisfied with the product, but I am not so sure about the thin type Quantity Speaker, even though Daytona has released a Thin Type Speaker.:It is a shame that Set has not been released. View detail
To the self-satisfied immeChain.
Not in terms of performance, but for FashionStyle's self-satisfaction!
It's a regular plastic frame, so you might expect it to be a little cheaper, but it's moodUp??'sItems.
The exchange procedure is not that difficult.
It can be easily removed by inserting a flat object such as a slotted screwdriver and connecting it, but I think that a plastic spatula can be used for recommendation without damaging the body, rather than a gold driver.
View detail
Helmet replacement
I bought this because I bought a new Helmet.
Frankly, it would probably be cheaper to buy a Surface Fastener at a sewing store and process it, but I bought a special one anyway.
Quantity:It was 1 Set of 2pcs.
View detail
For multiple Helmet use
I own a DT-01 Income and have several helmets, so I change it as I feel like it, and once the Mount Kit is attached to both helmets, I can use the Income just by changing the body. The price is reasonable, but I think it is very good. View detail
To replace Helmet
Used with MIDLAND BT X2 PRO S.
I bought this to port Income when I bought a new Helmet.
It includes the base in the image, 4 Screws, and a HEXWrench.
BT X2 PRO S also has a Clamp type pedestal, but in the end, this Paste Type attaches securely & SMARTLY.
As long as it is properly degreased before application, there is no risk of it peeling off.
The last one was used for less than 3 years. It was stuck on without any sign of peeling off.
(In addition, the paste surface is slippery Type.)
In order to follow the curved surface, joint parts should be bent and Habit attached before pasting.
The adhesive is very strong, so it is necessary to warm it up before removing it. It is recommended to warm it up before carefully peeling it off. It is recommended to warm it up before peeling it off.
View detail
It's neither good nor bad
I purchased a new adhesive Seat because I needed a new one to replace Income.
Naturally, since it is a DAYTONA OEM, we were able to use it without any problems in terms of size feel or adhesive strength.
However, even if you only want a sticky Seat, you can also specify a Quantity for the Parts of Others.:The problem is that each purchase of a set is a wasteful increase in the number of parts.
Also, perhaps because otherParts are included, the sticky SeatQuantity:I also felt the price was a little high for a 1pc.
However, in general, I have no particular complaints and will consider purchasing one if and when I need it.
View detail
For SecondHelmet
I am using DAYTONADT-E1 and bought this for SecondHelmet. It is very convenient because I can use this product with Speaker and Microphone by replacing only Body from MainHelmet. View detail
It is good to have these products.
Easy talking3 is a good product for Income beginners and Veterans alike.
Again, I purchased this product to attach to the Helmet of a senior Income beginner.
I really would have preferred just Magic tape.
Since it was so much fun, we also made a new Sponge for Speaker.
I'm looking forward to Touring with Income novice seniors while we converse!
View detail