Reviews
Used for SHOEIEX-ZERO
This size is ideal for helmets that do not have speaker holes like EX-ZERO and have no space in the mounting position.
I have used the standard Speaker and the thin Speaker, but the Smallest is the thinnest and the sound quality is the same as the others.
The price is a bit high, so IncomeQuantity:It would be appreciated if the Speaker of the Set could also be selected.
View detail
For the use of Income.
I am using btx2 pro s with SZ-RAM4 and bought it with Mount to be able to use it with my new SHOEI Z-8.
SZ-RAM4 has been in use for about 8 years, and it was time to retire it, but we decided to keep it because we were attached to it and could not bear to throw it away, and also because we would want to use Jet in the hot season.
In order to use the Income, the Microphone is available in the Included Parts:for full face, and it is sufficient to use the unused one in the Included Parts:for the Mount, but the Speaker and SlideMount need to be replaced each time they are used or prepared anew. Speaker is attached with Magic tape, and there is a spare tape included, so I thought about changing it every season, but later I thought it would be too much trouble and I might leave it on one side or the other.
The Z-8 has a recess for mounting the Speaker and a cutout to release the Wiring, kindly designed with Income mounting in mind.
The recess for mounting the speaker has a diameter of more than 40mm, and this C1294.10 would have fit just fine if it were a normal round type, but since the body is egg-shaped, it was a shame. By the way, it did not fit into the recess, and the One Side floated. It doesn't hit my ear and Magic tape seems not to come off easily because it is half attached, so I will use it as it is for now.
The sound level is sufficient for listening to music while riding a motorcycle. I was not dissatisfied with the sound of the SZ-RAM4 I had been using, but with the new Z-8, perhaps because the speaker is closer to my ear than with the SZ-RAM4, I feel that the volume is larger and the wind cutting sound is less and much quieter, so the sound has been improved. I felt that the sound was better.
I can't wait to go touring with my new Helmet.
View detail
Required when using different Helmet depending on Motorcycle
It is convenient to purchase multiple Bases so that you can use multiple Helmets. View detail
This is my second purchase!
This is my third IncomeBody, including the Body, and it is very useful because I can easily port it to multiple helmets with just one IncomeBody. (as a prerequisite that Body likes it). In terms of price, I chose this one because it costs about 8,000 yen, which is cheaper than the less expensive Income. As for the installation, I installed it in each of the three manufacturers, ARAI, SHOEI, and CUBT, and it was easy to install in all of them. I am generally satisfied with the product, but I am not so sure about the thin type Quantity Speaker, even though Daytona has released a Thin Type Speaker.:It is a shame that Set has not been released. View detail
It's neither good nor bad
I purchased a new adhesive Seat because I needed a new one to replace Income.
Naturally, since it is a DAYTONA OEM, we were able to use it without any problems in terms of size feel or adhesive strength.
However, even if you only want a sticky Seat, you can also specify a Quantity for the Parts of Others.:The problem is that each purchase of a set is a wasteful increase in the number of parts.
Also, perhaps because otherParts are included, the sticky SeatQuantity:I also felt the price was a little high for a 1pc.
However, in general, I have no particular complaints and will consider purchasing one if and when I need it.
View detail
Purchased to use different Helmets.
I purchased the DT-01 to use with both the Jet helmet and the Full face helmet.
I installed it on a SHOEI Z7.
I was struggling to put it away in Beauty anyway, referring to the Net information.
It took a long time, but the result was satisfactory.
I felt the price was a bit high, I hope the cord does not break.
View detail
![[Repair / Optional Parts] DT-01 Repair Parts Rubber for Base Plate Protection](https://global.webike-cdn.net/photo/impression/41/413df7e92310beb9a369fb60c128de2eL.jpg)
To prevent the DT-01 from wobbling
Full face helmet (arai XD) I installed the DT-01 on my car, but it seemed that the intake was not seated properly and it was wobbling. I was dissatisfied with the operation of the buttons, especially while driving, so I re-installed it with two layers of tape as an anchor, although this is not its original use.
The adhesive strength of the Double-sided Tape is weak, but thanks to it, the Income sits better and the wobble has been mostly eliminated.
I'm going to use it for a while to see if it peels off.
View detail
Shiningly
The Helmet is Black with Mirror shieldSpec. so I like the fact that it is Shiningly in my opinion. View detail
Color Coordinates
I bought it to distinguish between my wife and myself. I thought it would be nice if it became a little less expensive though the thing was good. View detail
Microphone for Full face helmet 。 DT-O1 DT-E1
Microphone and other parts are available as Repair Parts for DAYTONA's IncomeDT-O1 and DT-E1.
Velcro tape for sticking is also included for easy replacement.
When you use multiple Helmets, you can use the same Body and leave the Microphone & Speaker in the Helmet.
I am glad of the attitude that treats such Repair Parts as a standard product because it is possible to use it.
It is easy to replace (connect), just plug it into the yellow Connector that comes out of the Body.
Performance wise, it's just a normal Microphone, it's a Repair item so it just goes back to new.
If I wanted to...
The smaller the size, the happier I am, just like the Earphone in the Included Parts:section of the phone.
Because Helmet's mouth will be easy when the Size is about the tip of a cotton swab.
It would be interesting to make the Repair item Variation more aggressive than the Standard Product.
MINIMINIMicrophone for Full face! I'll probably buy it again when it's released.
View detail
![[Repair / Optional Parts] DT-01/DT-E1 Repair Parts Velcro for Fixing Cable Type Microphone](https://img.webike-cdn.net/catalogue/images/75533/17120_TS.jpg)
In reserve!
Repair Parts for DT-O1
After reapplying it a few times, it lost its adhesive power, so I bought it as a spare.
It has two in it and will last for the time being.
View detail
It's arriving fast!
I think the product itself is expensive, but it helps that We-Big carries Aftermarket parts. Every time, from order to shipment to arrival, it's fast! This item was also ordered and it took 2 days from order to arrival! View detail
Income replacement.
AllQuantity Adhesive Tape is AllQuantity:It's a set so you can relocate Income when you buy another Helmet or Helmet. It makes sense. [Contents] It is View detail
Easy to replace.
I bought a Single Item for my IncomeDT-01 Microphone sponge because it was torn. It was easy to replace it. If you pull too much, it is easy to break, so you need to be careful. View detail
![[Repair / Optional Parts] DT-E1 Repair Parts - Repair Adhesive Seal](https://img.webike-cdn.net/catalogue/images/75533/15131_TS.jpg)
Necessary to replace it nicely.
It is not used for the time being, but I bought it because I thought I might need it when replacing the Helmet.
This can also be used by cutting the Universal Product, but I bought it because I want it to stick nicely.
View detail
![[Repair / Optional Parts] DT-E1 Repair Parts - Velcro for Base Plate](https://img.webike-cdn.net/catalogue/images/75533/17114_TS.jpg)
Necessary for a clean installation.
I bought it to replace one Income with three Helmets.
You can use the Universal Product in the normal way, but the dedicated product can be installed more cleanly.
View detail
Makeover to suit your mood
The replacement of the panel itself can be done without any tools because it's just a clawed-in replacement. There are many other colors available, so it is good to match the color of the Helmet. View detail
You don't even have to worry about the thickness
According to the specs, it is slightly thicker than the Standard Product, but When I installed it, I hardly noticed it
The cover of the speaker is also very close to the ear unlike the crude one of the Standard Product is good
Sound quality is adequate
View detail
I can co-ordinate with Helmet
Blue Face panel is chosen to match the Helmet
It's a Recommendation because it can be easily replaced
However, I thought the price was high
Material of this Size:I feel that less than 1,000 yen is a very strong price setting for plastic products
View detail
Cost is high
I installed it on the Momo Helmet as a spare, but I was very impressed with the fact that it fits Exactly like an OEM The sound quality is of a very high level for this kind The sound quality is of a very high level for this kind of product However, the price is a little high for this product View detail