Reviews
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
Fits: KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R
Good vibes
I thought it would be more rugged.
It's not so bad.
View detail
Fits: HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD
Suitable for Separate Handlebars
I purchased this for a new installation of SENA's MESHAntennas. I re-installed the Antennas on the Multi Bar that previously had the Smartphone Holder and the Smartphone Holder on BPYamato's AluminumMount Bar. It is a product for CBRetc. SS. View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R
Multi Bar with USB power supply for convenience
Quantity of Smartphone Holder:If set, the USB power supply can be conveniently located nearby. The installation can be safely used in conjunction with the key by connecting it to ACC.
Connected to DAYTONA Attachment Power Supply Unit D-UNIT.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
For Smartphone Holder installation
I bought it for Navigation and Smartphone Holder installation. View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
DAYTONAMulti Bar Holder。
This is a quintessential DAYTONA product.
Fitting is outstanding.
Holderetc. on the bar.
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 50, HONDA Cross Cub 50, HONDA cross-cub 110
Mount bar for CROSS CUB
I found this product when I was looking for a mount bar to attach additional meters.
Since the installation was requested by the Shop, the details of the installation method are unknown, but it appeared that the Meter panel was removed and this product was co-tightened using the included Bolt.
The bar is now in a position that is very easy to see when driving.
Attached to the bar is an iPRO ShiftIndicatorAPH8 Red ・ SP MukawaΦ48Small DN Tachometer 12500rpm (with Rev indicator) ・ NeoFACTORY48mm Voltage Meter White Panel Stainless
When installed at the same time as the KITACO Neck Cover, modification is required for either one of them due to interference. (Modification of the Neck Cover is recommended.)
View detail
Can be used with ZETAHand guard
It is the same φ22.2mm as the Handlebar, and I purchased it to install a Smartphone Holder and a radio-controlled watch. I was a little worried that it might interfere with the ZETA hand guard I bought with the CT110 HUNTER CUB, but it was the same manufacturer and I was able to install it easily without any interference at all. Installation was done with just one HexWrench. After the installation, there is no rattling at all, so it seems to be useful for reinforcing the rigidity of the handlebar a little.
I am happy with the Handlebar because it is less cluttered around the Handlebar and is more Refreshing than I expected. I don't need anything else near WITH Handle other than these three. (USB power supply is already secured at another location) So, this is sufficient in terms of capacity. If I replace it with a Multimeter with a clock, I'll be more Refreshing, since I won't need a radio clock.
View detail
Good multi bar!!
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
Easy.
Large is just right.
I change equipment from time to time, and it is useful because I can exchange it easily.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
Cheap and convenient.
I used it on my GSX1300R HAYABUSA
I think it is essential for Smartphone Holder installation.
Cosmetically, it's great.
View detail
Fits: HONDA CRF250L, HONDA 400X, HONDA GB350, HONDA GB350S, HONDA CB400F, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750S, HONDA NC750X, HONDA NC750X, HONDA NC750X, YAMAHA XSR155, YAMAHA XSR700, YAMAHA SR400, YAMAHA SR400, SUZUKI Gixxer 250, SUZUKI V-STROM250, SUZUKI V-STROM250
suitable for gixxer 250
About quality and texture : handlebar material is solid About the feeling of use : solidly supports my handphone and action camera Products to buy together : you will need accessory mounts for your phone or action cameras Difficulty of installation : easy. just remove old bolts and install bolts provided Cost performance and comparison with other products : higher price but worth the good quality About shipping and packaging : fast shipment and good packaging Any concerns, cautions, or advice when purchasing : this works only on gixxer 250 View detail
Good multi bar!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Focus on cheap and durable.
Focus on cheap and durable.
[How is it used?
After spending about half a year with hanghang and restore&customizing the LITTLE CUB that was given to us, we decided to equip it with comfortable equipment next. First, we need an external power source. I decided to buy a USB power supply and a Mount bar from another company. Longer would be better than shorter." and repurchased Mount bar because it was longer than expected.
I wanted to make the Handlebar area a little more Refreshing, so I looked for a shorter bar and repurchased it.
How did you like it?
Short type M-SOULMount bar made of steel is very rigid and does not bend or deform even when driving on local dirt roads and holds the Power Supply Socketetc. firmly in place.
I've been installing Mount bars on every single car I've owned recently. It's boring to have the same products all the time." So, I spend my days searching Webike's product introduction section for products that are cheap and look good.
How did it compare to other products?
Before purchasing this product, I had purchased and installed a short bar from another manufacturer, but it was longer than what I had imaged, so I had to repurchase it this time.
If I wanted to fix various objects, the product I purchased last time would have been fine, but in my case, the mount bar was longer than expected because I only planned to install one or at most two objects, and the handlebar around the handlebar was not refreshing.
The length of M-SOUL's Mount bar was exactly what I had imagined, so I was satisfied that it was relatively Refreshing and cohesive after installation.
[Points to note]
The type is fixed with Mirror and clamping, so you can set the quantity to a position that is easy for you to use.:Once set, please tighten each part firmly to fix it in place. If it loosens while driving, it will cause a petit panic. (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
In addition to being Compact and Short Type for my purposes, the relatively Reasonable pricing was a deciding factor.
【Included Parts:presence or absence】.
The Mount Bar Body is an easy-to-install product with no assembly confusion because the mounting bracket is integrated with the Mirror Holder.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you have not yet purchased the products you want to install, such as a power supply outlet, Smartphone Holder, Drink Holder, or Camera Mounting Holders, you can make a quick progress by purchasing them at the same time.
Opinions and requests to Manufacturer.
I suspect there are a lot of people like me who want a super Short Type Mount bar.
From now on. Good products at affordable prices. Thank you in advance.
View detail
good
This is a very satisfying product. Kijima is a brand you can trust and purchase. I have several Kijima parts on my motorcycle, but this is my favorite. Thanks to the seller.. View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI GSX1300 R Hayabusa, SUZUKI GSX-R1000, HONDA CBR600RR
Material:Aluminum and high quality product.
[How is it used?
I installed the Mount bar on my SEROW250 and it was so convenient that I wanted to install it on my SV650X.
I knew that SV650X can use Stem shaft fixed type as well as Mirror Holder installed type because of Separate handleType, and I thought it would be better to use Stem shaft inserted and fixed type. I found this product on sale, so I jumped on it.
How did you like it?
The bar is made of machined aluminum, so it has a sufficient texture. To be honest, if you attach a smartphone holder with a large size, you will not be able to see the bar part, which is a waste of space.
I bought the Silver one because the Black one was temporarily out of stock at the time of purchase. I am satisfied with the functionality of the product.
The product was more than Image.
How did it compare to other products?
This type is inserted into the hollow part of the stem shaft and fixed with a bolt, so it looks like a reflex.
The price is relatively low because it is on sale, and the quality is perfect, so I feel that Timing did a good job in purchasing a good product.
[Points to note]
The bolt for fixing is included in the package, so you may be able to adjust the height by inserting the collar up to 10mm.
Quantity in an easy-to-use Position:Once set, please tighten it firmly and securely with the proper Torque. (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
Material as mentioned above.:The deciding factor was the Reasonable price for an Aluminum Mount bar.
【Included Parts:presence or absence】.
Quantities of Mount Bar Body, Aluminum Collar to insert into the Stem shaft, Bolt and Nut for fixing, Fixing Collar with large outer diameter by tightening, and Instruction Manual.:Set
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
This was my first time using Manufacturer's products and I am very happy with them. Good products at affordable prices. Thank you in advance.
View detail