Reviews
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Not suitable for CB400SB!
I am on NC42Second Type Model (2BL-NC42).
Although there were scattered reviews that said it could not be installed, I bought it because I believed it was compatible with the product.
As a result, it was no good.
Even if you can get to a temporary fixation on one Screw, you can't reach Limit in place on the other side.
The Level is not possible to install unless the Cowl side is bent by force (probably to the point of breaking) or the Bracket side is bent or shaved.
During the trial and error process, the other Screw and Washer were dropped deep inside the body Frame and became missing, so we gave up on the installation.
Since the work was done the day after the new car was purchased, defects such as distortion on the body side are unlikely.
Some reviews say that it could not be installed even on the early NC42 (EBL-NC42), and I think it is not compatible with CB400SB in general.
It says that it is compatible with both KIJIMA and Webike, but was the CB1300 used as the basis for determining compatibility?
I would like to see it properly verified.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB110, HONDA SUPER CUB 50
Silver、Black
The product features are listed as Silver, Black...
All bar parts of the Body are Silver.
The information on the mail order site also says that the karaa is silver.
Normally, I think the bar is also Black. The difference is that the mounting parts are Silver or Black.
View detail
late delivery
Delivery date is 3 days later than when the order was placed.
There is also no CanCell button listed in the Cancellation method.
I will never buy from this Site again.
View detail
You should buy a DAYTONA conversion Spacer.
I think the outer circumference is Cut-out accurate.
However, the edge surface is gouged and anodized without Edge treatment, so it is dirty.
Also, the holes for the fixed bolt are off-center and do not make a nice circle when combined.
In addition, since a thin Screw is cut directly into the aluminum, it will almost certainly lick if you try to tighten it to the point where it will not rotate.
I would much rather buy a Daytona Φ13Pipe conversion ClampSpacer (https://www.webike.net/sd/23697712/) than buy this. This is just an expensive Garbage. The proper price would be about 1500 yen.
View detail
Too Thin, Too Shaky
Bought this as an aesthetically pleasing option for mounting a phone to my Super Cub. However, it was insanely unstable. The bar never stopped vibrating such that it was impossbile to interact with the phone and visible cracking began to form quickly on the welds. The cantielver is just too large off the mounting points and the metal is too thin. Avoid it at all costs. View detail
attachment
It's pricey, but the grooves in the included Bolt are too shallow to bite and hold it securely in place. View detail
Cannot be installed. Cannot be used.
After I received the product, I tried to install it at a later date, but I don't know if there are different screws in the parts or what, but anyway, the screws are not tightened or fixed. The screw keeps turning. When I looked at it carefully, I found that there were only 4 screws in it and no parts to fix it, and there were only holes in the body.
What's going on?
View detail
I need more child parts.
Nut is not enough…
Made in Germany is not like this.
View detail
No heavy objects.
I bought this because I thought I could put it on the Handlebar at my preferred angle, but even if I tightened it up, it wouldn't hold the angle and would move around. Is it? I couldn't use it for what I think it's for. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
14Y (ebl-nc42) It cannot be installed in
Both webike and kijima's fit table, both are wrong.
2014 cb400sb. (ebl-nc42) I was not able to install it in the
The shape of the bracket does not match the recess of the cowl.
I also contacted kijima.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
The fit chart is wrong. Inaccurate…?
If you're looking to buy this product a 2014 cb400sb. (ebl-nc42) If you are an owner of the "Mere Old Man", you should quit because it is impossible to install.
The product is listed as a '14 nc42, but it doesn't actually fit. If you are interested in other models "Oh, really? Please think of it as a degree.
I'll also tell them how exactly it won't stick.
In case you're wondering, my unit has no restoration history.
First of all, the shape around the bolt on the OEM Inner cowl side does not match the shape of the bracket on this product. (Quantity:1 pc. Eyes)
The width of this product is larger than that of the Inner cowl, and the bolt hole cannot be aligned even if it is aligned with the installation position forcibly while scratching the Inner cowl. (Second one)
It will come on if you bend and cut the quarry, then you should have written that it requires machining.
I bought Fender Eliminator Kit of the company before and installed it, but it interfered with Tail lens and License Plate Light, so I replaced it with Active one immediately.
I don't mean to say anything against KIJIMA, but since they have nc42 lineup, I wish they would develop more accurate products.
View detail
nowadays
I don't think this is the right build, it was painted without any post-treatment after removing BALI and PRESS I ordered it for touring from next week I don't know about painting, but I'm not sure if you can paint without treating BALI or punch marks like this, and you're not going to be able to do it I'm sure it will come off soon It's a terrible product for the first time in a long time; GIVI, KRAUSER, SW-MOTECH, etc., etc., overseas This is the first time I've purchased this type of product before and it's the first time it's been bad I really want to return it, but I have to use it because I have plans for next week Really disappointing product View detail
The Concept is outstanding! But the quality?
I think it's great that they are available for each car type so I don't have to worry about installation
Because the bar can be moved freely, there is a high degree of freedom in positioning
Concept so far has been good, though
First of all, the Screw to fix the Clamp to the Bracket does not go in straight, so it is not possible to fix the Screw to the Bracket at any place Even if I tightened it up to the point where I could not secure it firmly
In that case, the paint on Bracket and Clamp came off
I thought it was defective and asked the manufacturer via Webike to replace it, but
Original text below
=============================
Thank you for your help
The vehicle you inquired about is a compatible model
The content of your inquiry
The lower part of the clamping area is not processed roughly and cannot come into contact with the bracket in a straight line
Screw does not go in straight because the screw hole under the clamp is distorted
That's why the included WasherQuantity:It is not possible to fix the Clamp section to the Bracket section with about 1pc
We have verified the images with respect to the fact that the product is within the product tolerance
The paint on the Mirror Bracket section peels off easily during installation
This depends on the customer's method of installation and use
You've contacted us to request an item exchange
The products we have in stock will be similar in quality, so we will not be able to offer you the same
We do not believe we can provide products that will satisfy our customers
It is possible to return the product
Thank you for the above information
==============================
I received a reply, "I'm sorry, but I have to return it
The range of product tolerances is so wide that some of them cannot be used in fact only with Included Parts:How is it that there is?
View detail
Fits: Others , Others , Others , Others
Initial failure
Although there were many things that were not successfully charged due to contact failure immediately after installation, we use cheating because the initial defective return period has passed and removal is troublesome
. It was a very disappointing shopping...
View detail
Fits: SUZUKI GSX-R1000, HONDA CBR600RR, HONDA CBR400R, HONDA CBR250R, HONDA CBR250RRR, HONDA CBR500R, HONDA CBR500R
Mounting not
I installed it in the corresponding model 96 year type CBR 1100 XX, but this product was so big that I could not install it without entering the Stem hole.
I purchased and installed One size Small BPY_14011, anxiety such as being able to move by hand was left but I could mount it without trembling while driving.
The same Owner is One size Small (18. Please purchase for 1 ~ 20 mm).
View detail