Reviews
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
Combined installation with Valter Moto's AxleProtectionAdapter.
I wanted to install Valter Moto's Axle Protection Adapter on my YZF-R6, but the shaft hole diameter was too wide and even after widening the hole, it still didn't meet the diameter of the hole. The slides have a wider range of movement, and the expansion is extended. It is now possible to install the M6 bolt.
I installed it at my own risk because it is not how it is supposed to be used, but at any rate, I am glad that the Parts I purchased did not go to waste.
View detail
No complaints
Compact and easy to install without interfering with driving View detail
After all it is convenient
The installation was easy, just as shown in the picture, and I think it is a convenient item to have. View detail
I was looking for something Compact and Simple.
If you put a Switch on the Handlebar...
The mounting location of the Smartphone Holder is
It was installed in a delicate position.
Look for something less conspicuous.
We arrived at this product.
Very Compact
This in itself is not assertive in a good way.
I just hide behind my phone while driving.
I understand that the Material is hard resin.
Screw holes are reinforced with steel 。
The thickness of the part to be inserted into Mirror is 7 to 8mm, so
The length of Bolt should be noted.
You will need something about 10mm longer.
I found a good one.
View detail
Fits: その他 , その他 , その他 , その他
Handlebar Post is also included.:I appreciate the Set.
This product also comes with a Handlebar Post.:Set, which is Exactly for Motorcycle with narrow Separate handle and Handlebar area! View detail
I still need … Smartphone Navigation!
What made you decide to buy?
Before I installed the KawasakiOEMOption Steering Damper on my ZX-6R, I had installed a KIJIMA Handlebar Mount Bracket, but it interfered with the Steering Damper. After considering alternatives to KIJIMA's Mount Bracket, we decided to use KIJIMA's Mount Bracket. WorldWalk:Smartphone Mount bar I met and purchased the product.
How was your experience with it?
Before purchasing, I was disappointed that there was not enough information about the WorldWalk:Smartphone Mount Bar for 6R. I have been using it to hold my cell phone for a long time. I used to use "Oxford:I installed the "Clicker /Handlebar Mounting for Motorcycle" and it is firmly in place and does not interfere with anything else. The OEMMeter is also clearly visible, although the phone can only be mounted sideways.
Unlike KIJIMA's Handlebar Mount Bracket, this bracket is mounted in the upward direction. I was impressed by the manufacturer's skill in measuring the mounting position to maintain a subtle clearance, but there were some disappointing points. The paint job of the bar clamp is perfect, but the finish of the HolderBody is a little bit rough. I thought that it was probably manufactured by a certain Large land … manufacturer. (As a personal opinion)
Regarding installation …]
Remove the OEMHandlebar clampBolt. Once removed, use the supplied aluminum collars to attach the bracket for fixing the holder. This is where the ad-vise comes in. The included M8 bolt is used to secure the bracket and aluminum collar, but if the bolt is tightened at the specified torque, the bracket will move to the tightening side, which will affect later work. First of all, set the quantity:Pair (for Left and Right) The Bracket for fixing the Holder on the left side is temporarily fixed. Next, temporarily fix the Holder to the Bracket for fixing the Holder and attach the bar. (At this time, there are two washers for the Holder. Since the clearance is delicate, do not use washers for temporary fixation, but use Bolt only for temporary fixation.) where the bar Quantity:Pair (for Left and Right) position adjustment and fix the bar firmly to the Holder. (The bar has a hole for drainage! I am at this time using theQuantity:Pair (for Left and Right) and adjusted the bar so that the hole for drainage faces down). After adjusting the position of the Holder and bar, we left them as they were, and set the Quantity:Pair (for Left and Right) Tighten the holder fixing bracket of the "2" at the specified torque. Finally, use the two washers that were removed from the bracket for fixing the holder at the position specified in the Instruction Manual, and tighten the holder with the specified torque. This work was a little difficult because there was not enough information about the WorldWalk:Smartphone Mount bar for 6R in advance, but the work was completed without any trouble. WorldWalk:Smartphone Mount bar is recommended.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
The best inexpensive product of the many I have bought.
How was your experience with it?
I bought several of them and finally settled on this one.
The Mirror Bracket is already full, and adding more would make it impossible to reach the Mirror screws.
Mirror Bracket rejected.
At first I installed it facing forward, but then I learned that either direction is OK.
We decided to point it forward.
We wanted to keep the eyes in front of us as much as possible.
Most importantly, the installation is Bolt-tightened, so it will not move.
Bracket was a bit concerned about that.
Very Simple but very cosy product.
[Points to note]
Use Torque wrench to install.
Handlebar Clamp Bolt will be Large weird if you screw it off.
On the other hand, a loose handlebar will interfere with the fixation of the handlebar.
How did it compare to other products?
Cheapest and most stable.
View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, Others , HONDA CB1100 RS, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA CBR250RR(2017-), HONDA CT125, HONDA PCX125, HONDA PCX160, KAWASAKI Z1000 (water-cooled), KAWASAKI Z125 PRO, KAWASAKI NINJA2 Helmet50RSL, SUZUKI GSX-S1000F, YAMAHA MT-03 (2015-), YAMAHA MT-25, HONDA CB150R, HONDA CB300R
Short Type, easy to use in tight spaces!
This Multi Bar Holder is Short Type, so it is easy to use in a narrow space around Handlebar. I've been holding my watch and phone to it, and it's strong enough to hold them! View detail
I put it on 3 Motorcycles and used it for about 3000 km.
C90CM In use for CD125Ts
There may be some interference with the Visoretc. for installation, so it may be necessary to bend or change the angle.
I have used it for about 20000 km and it is sturdy and does not bend or crack when I attach my phone and USB port.
If I had to replace it, I might not change it unless it gets too rusty or I get bored.
It is just right for general smartphone mounters to be installed.
I am using a different type for my CB125Tw and this one is also in use for about 10000km with no problems.
View detail
Fits: HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR500R, HONDA CB300R, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R, HONDA CB250R, SUZUKI GSX1300 HAYABUSA, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR
Navigation and Smartphone Holder can be attached.
Repair parts are also available. View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
watchman
I purchased this for a Smartphone Holder and USB power supply.
We chose a higher height, and it was the right choice.
Without it, it is inconvenient.
View detail
Fits: SUZUKI GSX-R750, BMW S1000RR(10-13), KAWASAKI ZX-14R, KAWASAKI ZZR1400, SUZUKI GSX-R1000, SUZUKI GSX-R600
Unobtrusive Mount bar
I bought a used GSX-R600 K6 and was looking for a mount bar since I was using my smartphone as navigation and found this product.
Installation was very easy and I like the one-sided design.
As a result, it did not interfere with the keys and was a good purchase.
In the picture it looks like it is covered by the Speedometer, but it is perfectly fine while driving.
It is an Image with Meter on the phone.
I was also a little worried about interference with Cowl and Screen, but my fears were unfounded.
We are also planning to add USB, but there is extra Space that could be installed right next to the Smartphone Holder.
It was a good purchase
View detail
2019 monkey125
2019 monkey125(jb02) can be installed. It's firm. i will hang a kind of plastic bag on the helmet hook. it's so versatile. View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
It is easy to install.
Well made, beautifully welded, and satisfactory! View detail
thank you for good product
It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. do View detail
I'll never break my iPhone Camera again!
I broke my iPhone Camera.
I had to change the model, so I decided to take measures to prevent it from breaking again.
As expected of Boa Ace, Quality is perfect.
I bought another pc. and also use it with CT110 HUNTER CUB.
View detail
Fits: KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000
Firmly.
14mWrench for Mirror removal is a quantity.:I was unprepared for the 2pcs, but the work itself was easy, and the Smartphone Holder and Camera were also fixed perfectly. View detail
If you want to put a couple of these on your bar, I recommend it.
If you want to attach more than one USB or smartphone holder around the handlebar, you can do so.
The Multi Bar is useful, but the Large Bar and the one in the center of the Handlebar are not.
It was getting in the way when I was driving, so I replaced it with this one.
If you have up to two things to attach to the bar, I recommend Left only.
View detail
Fits: その他 , その他 , その他 , その他
Refreshing the Handlebar Area
I bought this to integrate my Charging Socket, GoProMount, and Smartphone Mount.
Since the Clamp Bar is a standard 22.2mm diameter, there are many products that are compatible with it, and GoProMount and Smartphone Mount could be pimped.
If you are not confident in your wiring skills, it is better to have a motorcycle shop install it for you.
Not only this product, but the electrical system can be the basis of complicated troubles, and the recent delicacy of the ECU in motorcycles can cause electronic control malfunctions.
I basically use the Couplet-on interrupt power extraction cable because of the risk of poor contact, especially when using wiring interrupts.
In addition, since I used to install the charging socket on the handlebar, I had to take the angle of cut of the handlebar into consideration when installing the socket, but since this product is a type that is co-fastened to the TankMount, the wiring process was a little easier.
It is comfortable to use, and the Handlebar area is refreshing.
The power supply port is also covered, so you don't have to worry about it on rainy days or when you wash your car.
Losing the Cap cover can be tricky, so I think a drop-proof Wiringetc. is a must.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
JUST for Sports
I used to use a Stem Mount Holder, but many times when I turned the key, the Stem Mount Holder got in the way and I got frustrated.
It's also annoying that I've broken the fixed Hook on the Smart Holder twice when I've put Helmet on the Tank or something;
I ordered a number of mounts from various manufacturers, and after a lot of trial and error, I finally decided on a mount that was JUST right.
The Cowl is too low for the recent sports models, and if you use a higher Mount Bracket, it will interfere with the Cowl, but this Mount is fixed to the Mirror Hall, so it will not hit the Cowl.
I should have chosen this one from the beginning. Crying 。
View detail