Reviews
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
Multi bar
Item received in good condition and well packed. Received within one week. Quality is okay. Have not yet fixed bt seems legit durable. View detail
Large funny and convenient
I had attached the Multi Mount Bar of DAYTONA to Left Side before, but I still thought that I wanted to install it in addition to the watch and Navigation as well as Right Side.
However, Right has an external tank of the Master cylinder, and fortunately, I found this cheap item from MADMAX, and I tried to buy it as soon as it is Short.
The result was Large correct answer.
While Limit to Tank and Cowl, it feels just fine.
So we could relocate the watch from Left Side and then install it to CameraMount.
Besides, I was fortunate enough to expose Camera's head to the exact face of Screen.
Previously I forced it to Bracket of Side-view mirror,
Because the mount was damaged because of the road surface roughness of Aso,
I feel that I can reduce that position this time.
Thanks to Left's leeway we can also install 7 Inch Navigation.
Although the finish of the product is somewhat rough finish of Cap at both ends, it seems that painting is also solid.
Considering safety measures, I blew Clear's ChassisSpray.
Installation seems to be problematic, but the attached Bolt seems to rust, so I exchanged it with a hand of Stainless.
At this price, it was Large satisfied because there was only this effect.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Electronic equipment second stage
【What made you decide the purchase?】 Smartphone to SS / For fixing the Camera
【How was it actually used?】 Length is the best. Smaho Holder + another set
【Was it difficult to install? (Hard parts case)】 Just tighten with the bar Holder
【Please tell me the point of installation and hang (in the case of Hard parts)】 None
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please let me know if there are any improvement points】 Would not it be cheaper with the bar Holder and Set?
【Have you compared items?】 Similar fixture
[Others] If there is a possibility of equipping two or more at the same time, I think that there is a bar type
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
Electronic Equipment First stage
【What made you decide the purchase?】 Smartphone to SS / For fixing the Camera
【How was it actually used?】 I thought you got a good idea
【Was it difficult to install? (Hard parts case)】 Easy / Just tighten Bolt
【Please tell me the point of installation and hang (in the case of Hard parts)】 It may be better to prepare things like Hook that hook Strap
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please let me know if there are any improvement points; Bolt is Black, price is 2 / About 3 ◎
【Have you compared items?】 Similar items and self-made expenses
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
Note the length of Screen
Although I bought it that it is easy to see with less gaze movement in the place of installation, I am wearing us Long Screen and I can not interfere with Screen when I try to insert a smartphone vertically. It may depend on the relationship between Holder and Bracket, but you should note that those with Long Screen. View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
Practical frame
YZF-R6 (2017)DAYTONA DAYTONA : 95444Mount Kit Multi Bar Hold This pipe rack allows me to hang a car recorder, phone holder, usb charger. Even able to clip other personal accessories. This design is very practical！ Good transport packaging to protect the goods; there is a very clear manual; so that a layman can also be installed for the car View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
DAYTONA Mount Kit Multi Bar Holder
YZF-R6 (2017)DAYTONA DAYTONA : 95444Mount Kit Multi Bar Hold This pipe rack allows me to hang a car recorder, phone holder, usb charger. Even able to clip other personal accessories. This design is very practical！ Good transport packaging to protect the goods; there is a very clear manual; so that a layman can also be installed for the car View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R
It is not necessary to be honest as it is
Subsumaho Mount for BackMonitor that was attached to the bar with a slight gap of Separate handle
I purchased it because I was trying to manage it because the position was bad.
HandlebarCenter has Mount of Main, so it interfered and it was not possible to install.
I thought that it would come a little more if I looked at the introduction image.
I tried to remove the Mount of Main and installed it, but it looks like a baluster and it was kind of bad.
After trial and error, we cut the bar, processed it, and put it on the side of Left and worn it.
I think that this is exactly good.
Although it is a story about the position after machining, I am satisfied that I could just put it in a good position.
I think that a T-shaped bar to attach to the Center hole is enough to buy this.
View detail
I am satisfied..
I installed it to fix the smartphone. Because it is only a smartphone, this length is enough. There is no Stress on inserting / removing the key. It was also very attractive that USB was also integrated.. However, I do not understand the opening and closing hang of USBCap, it is a little difficult to open. View detail
By dedicating, Bracket and others are OK
Clamp Bar and USB will be messed up separately, so you can install it on Simple with built-in USB.
When not in use USB part can be locked with kitchen and countermeasures such as rain are done firmly. That Cap is stiff accordingly.
View detail
Patchy
It is cheaper than KIJIMA's product Multi Bar and seems to be convenient, so I purchased it here.
It is good to use and it is easy to use again.
Cigar & USB, Camera pedestal, Smartphone Holder is attached so it is enough.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
It plays a solid role
YZF-R1 (2013)
DAYTONA DAYTONA : 95444
Mount Kit Multi Bar Holder
We are installing it together.
Handlebaretc. There is no interference with the traveling operation section.
However, there is a bar at the position where it is difficult to push the Ignition switch or the backward Hazard switch, so there is attention there.
Depending on what you install, Meter also disappears partly.
I am "Hyakki Hakakki : Multi-Holder for iPhone5 / 5s "is attached to the Left Side,
Interference with Ignition (You can do the operation itself) , Tachometer 0 to 4 can not be seen.
In other words, although it will be called Position that you can take moving videos etc. with a smartphone (Lol)
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
As intended, perfect Size
YZF-R1 (2013)
DAYTONA DAYTONA : 78412
Multi Bar Holder Stem Clamp
Purchase for installation here.
It fits nicely in Stem hole?.
I have attached a smartphone Mount, but no problem.
View detail
Purchase for movie shooting
Replacing Motorcycle, Handlebar Mounting for movie shooting on Handlebar can not be installed without Space.
If I had thought of what to do, I found the goods of this one with the Mirror.
I purchased and installed it for the LeftMirror side.
The installation was also very easy, and it was possible to install it without problems in about 5 minutes.
It is likely to be useful from now.
View detail
Fits: その他 , その他 , その他 , その他
great use
Fast delivery as expected, complete equipment, good material. easy to install The included cable ties keep the cables organized and uncluttered. The USB port cap is a bit too tight. and should be made into a rubber cap for easier use and good waterproof View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
It's pretty good, but it's alright
The position of the bar is easy to see on the Meter, but I think that it can be a bit higher. I want you to be able to adjust by installing a plurality of mounting holes of the bar.
Good place to fix firmly in Exclusive Design is good.
Length of bar is short. Maybe it will be difficult to lengthen it as it hits Screen?
View detail
I think that it is easy to use.
I attached it to Right Side Mirror of BMW's R1200 GS.
It is an installation to make it easier to watch the iPhone.
I think that it is good to be able to slide to a position that is easy to see because the tip part is getting down..
View detail
Purchase that there is no Navigation Bracket attached
Replacing Motorcycle Replacing Motorcycle with Accessory socket Now trying to attach NavigationBody to Handlebar my Handorbar of my Motorcycle is not a normal new circle and it does not attach in a slightly changed form, Do not fit together - Ho - I was worried about the rest, but I decided that the rest could be attached to Bracket using Mirror Body and purchased it with Mr. Web, I could complete the installation.
I installed it using LeftMirror side
1 - Remove LeftMirror and adjust Bracket - - - It was a bit small, but it was a little small but I did a good job without Large width remodeling
2 - Carefully tighten the Mirror Body so as not to damage the screw thread.
3 - I aligned with Mirror afterwards and tightened.
4 - That Navigation Bracket (Purchased and used by Webmen) Attach Body.
5 - Navigation Bracket Body has gaps slightly above and below but Large As durable it will stay as it is
6 - Temporary attachment of Navigation Body and installation completed with angle as well
It is easier but I will write it as an impression
There are a few points to worry about
My MirrorPitch (8. 10 mm) to see if it is better to purchase - - - Large I did not have a problem
View detail
Fits: HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD
It was good.
I was able to install.
Because it was written that CBR 1000 RR can not be installed depending on the vehicle,
I was worried but I could safely fix it.
View detail
no problem!
We installed Multi Mount BarFE on BirdCity. There are various prices for this product in Pin Kiri, but first select the product that seems to be problematic also by looking gently on the pocket and also looking at the cheapest on DAYTONA again. The installation is also OK, the bar itself is Steel so it's a bit heavy, but I think that even if you look at the mounting state it will not be closed off even compared to other expensive items. - - - So, what will you install in this bar? - - - "Better safe than sorry." I can not tame Custom! Fashion! (^ ^ ♪ View detail