Reviews
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
Just attach it to the phone cover.
Quantity to Holder:Set is 90-degrees rotation, so the phone is in portrait and the Quantity:Set or beside Quantity:Set or not Set is determined by this orientation.
I can change it on the Holder side with Hexagonal Wrench.
I use it every time I go touring and have no problems.
Large Variety Satisfaction
View detail
Fits: Others
Mounted on CUB 110cc Crank bar
We replaced the Rubber part of Crank Bar's Smartphone Holder with this one.
When I run, the phone is still vibrating in Small increments due to vibration. I'm not sure how much the vibration is reduced, but I think it's good for preventing breakdowns.
View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
Fits: Others
Shock and Vibration Absorption
Installed on QuadLock.
Used in conjunction with Shock Absorption Damper.
Size is 22.2Φ and Body is quite soft.
The price is high, so I would like to buy 1 pc. for now to try it out.
View detail
It holds the phone securely in place.
[How is it used?
I purchased this product to use my phone as Navigation in Touring.
Was the one you received as per Image?
The ball joint of the mount was smaller than I expected.
Was the installation difficult?
There are only two types of Spacer for Handlebar Mounting, 22.2mm and 25.4mm, and my Handlebar is 28.6mm, so I went to Home center and bought a 2mm thick Elastic band and inserted it between the Handlebar and Clamp. Without Spacer, it was just right because it is compatible with 32mm.
A Hexagonal Wrench was also included and was easy to install. However, the Ball joint does not have much operating range front to back, so once I tried driving with the phone attached, I loosened the Bolt on the Mount once and adjusted the angle.
How was your experience with it?
Driving on public roads, the phone was firmly secured and did not sway with the vibration of the Engine.
[Was there anything that disappointed you?
It would be nice if it moved back and forth a little more.
View detail
Easy to use
It is a replacement for DAYTONA's Smartphone Holder.
It is easy to install and easy to use.
Vibration absorbing Bumper was installed at the same time.
View detail
Large texture
Size-wise, it's like a Large tree, but I think Hold is a good idea.
Good for single cylinder motorcycle as I also added vibration protection.
View detail
KaEdia SafetyBand
I had to repurchase it because it shredded when I was stretching it to install my phone on a cold day.
It would be better if it were a little thicker.
View detail
Slightly unstable
From a friend when I got a new phone.
You should definitely get one because the Camera's Autofocus feature is so fragile!" I bought it after being advised to do so!
The stability is a little worse than before, so I'm a little worried.
It's better than worrying that the Camera might break.
I don't know how well it works yet, but I'm glad I bought it because it doesn't seem to have any problems!
View detail
Robust retention and mysterious unity
[How is it used?
Quantity of about 8 years and 80,000 km (YZF-R25, 10,000 km in half a year, the rest YZF-R6):2pc. Use Set
Installation:All of them are installed by building a base on the handlebar, R25 with Nisshin Mirror Holder, R6 with CF POSH Mirror Holder (https://www.webike.net/sd/1125900/) and YAMAHAOEM Parts (https://www.webike.net/sd/1125900/) with M10Ball (https://www.webike.net/sd/1125900/) and Short arm (https://www.webike.net/sd/1125900/). R6 is equipped with CF POSH Mirror Holder (https://www.webike.net/sd/21313052/) and YAMAHAOEM Parts (https://www.webike.net/sd/25729937/) with M10Ball (https://www.webike.net/sd/24021956/) and short arm (https://www.webike.net/sd/21313052/). Short arm ()
Equipment used
Xperia 5 I don't even remember because I have no records before and I wasn't really interested in smartphones.
1. Xperia 5 (docomo) approx. 2 years
2. Galaxy S21 (docomo) about 1 year
2-1.DriveMan BS-8 (https://www.webike.net/sd/23219567/) parallel operation
3. Xperia 5 iii (simFree) about 1 year
4. Pixel 7 Pro (simFree) approx. 1 year
Was the one you received as per Image?
Simple look and somewhat rough information as per Image
Was the installation difficult?
Once the ball of the base is fixed, Arm components can be tightened and loosened without the need for tools, making them easy to use.
However, the Handlebar is used with the smartphone attached to the Quantity:Pair (for Left and Right) It is necessary to check the interference with the Screen, etc. by cutting the screen in half, so it is necessary to check after attaching it.
How was your experience with it?
Even after fixing, some Quantity:Pair (for Left and Right) There is some play in the rotation of the wheel, but it did not rotate while running and did not cause any problems in use.
Although it is not known whether the Smartphone and Camera we used have optical image stabilization, we have never experienced any problems with the Camera.
I have never had a phone fall off without the rubber claws, though. It is just meant to be a precaution.
The rubber part alone can be replaced, and the color can be selected from three colors (https://www.webike.net/sd/24186773/), so the expense is modest when deterioration is somehow a concern. Adhesive also included.
Since it is clamped by four claws, it is necessary to pay attention to the position of the Button (dedicated to Camera of Xperia or Action of iPhone 15Pro) if it is located on the edge of the Smartphone. (I mean, even the Pixel7Pro with two buttons on the Right Side sometimes pressed them.
The size of the gold part of the OEM mounting base of the Driveman BS-8 (also 10) and the gold part of the center seal of this product when the seal is peeled off are brilliantly the same, and when the gold part is disassembled with appropriate double-sided tape and transplanted and attached, it becomes a much sturdier and more robust mounting base than the BS-8's optional Handlebar Mounting. The Mount base is much sturdier and more robust than the BS-8's optional Handlebar Mounting. (It is also possible to clamp it with a nail to further increase stability.
I think I gave up on Seal because its texture is similar to that of YAMAHA's tuning fork Sticker, and it looks similar but slightly different in Largeness.
[Included Parts:were they on?
No Instruction Manual or any other instruction manuals are included in the product images.
[Was there anything that disappointed you?
Nothing special. However, I would have been sad and run to SYGN HOUSE if I didn't know that it was made in the United States and used by the military, but that it was not so particular about the appearance of the product.
Originally, we had used a holder composed only of resin from Miknowla, but the time and effort required to attach and detach the Smartphone was far less. Also, the claim that it is also used by the military made me feel more secure on my motorbike, which has a lot of vibration.
I have never encountered any image stabilization problems, and would have continued to use this product if there were not more Buttons on the Smartphone side.
View detail
Smartphone Holder
I am very happy with the quality, it holds well, and it is inexpensive. View detail
Mounted on SRX
[How is it used?
For smartphones as Navigation for Touring.
Was the one you received as per Image?
Large swing from DAYTONABrand's Miknowla's.
How was your experience with it?
There is no space for mounting on the handlebar, so I use it horizontally by fixing it to the Stem Nut. I have no problem with charging with the TORQUEG06.
[Points to note]
Arm retention is solid, but the handlebar mounting and ArmBase are separate and there was a little rattling here, so I inserted a piece of sponge tape between them.
How did it compare to other products?
This is a replacement for the one from Miknowla, which is no longer available due to the smartphone's Large type, but it is a bit lumpy. It is a little bit tough, but I think that is why the fixation is so firm.
View detail
Smartphone Holder
Hold feel and texture is good. And cheap. View detail
good-looking
It does not sway much while driving and is very stable.
This was my first time installing it, but it was easy to do by myself without hesitation!
Since it is a Scooter, I also liked that it has a Mirror mount.
It is easy to remove and install because it is instantaneous.
However, it was a blind spot that I could not install it if the Smartphone case has a Ring on it.
Remove the Case and use it.
View detail
Fixing stiffer than previous product
I had used the previous product, but this new product looks more luxurious, and the locking mechanism is quite good with easy detachment of the phone. It seems a little hard, but I think it will become less of a concern after a few more uses. View detail
Easy to use and safe
I installed on honda Hornet 250.Looking good design & easy to fixing.As a fixing tool Allen key will along with catalog. Depending on handle size there are rubber gland (for clamp mount)along with parts.can be turn and adjusted vertical or horizontal . The clamp mount will fitted firmly to handle."dyatoma made in Japan " printed on camp . I'm using 165.3 x 76.8 x 10.1 mm phone.tightly clamp to the phone,little hard to put on ,but can be adjusted as a phone size.phone mount corner clamps are protected with sponge pad for avoid phone scratches. There are 2 white rubber band hang on with phone bracket, it's for put in your phone for safety.(avoid falling down) I will Recommended this for motorcycle enthusiast. View detail
It's hard to tell the effect, but is there...?
[How is it used?
I bought this one because my iPhone Camera had broken in the past.
Was the one you received as per Image?
It looks exactly as it should and was easy to install with no problems.
How was your experience with it?
After actually using it, I honestly do not know if the vibration is reduced.
Since it is a 250cc single cylinder Motorcycle, there is a certain amount of vibration and the phone vibrates slightly.
However, I am satisfied with the use of the Camera on my phone without any breakage.
[Points to note]
After all, this Device pinching makes the phone seem to pop out more than expected.
The Mount is somewhat noticeable, but I can't go far without a map on my phone, so I guess it can't be helped.
View detail
It seems to be the best I have used so far.
Dedicated Smartphone Case and Quantity:It is expensive to buy as a set, but since it is directly attached to the case, it is compact and inconspicuous when removed, and when worn, it is less extravagant than other products, so it is good to wear on a full cowl motorcycle.
If there is a drawback, I have to buy a Smartphone Case when I buy a new smartphone, but I am worried about how long it will take to get a dedicated Case when I buy the latest model.
View detail
This product is easy to use for various sizes.
This summer has been very hot and carrying a bottle of beverage was a must. I used to carry it in my bag or top case, but I could only drink it during breaks. I think the large size is good because I can easily drink when waiting for a traffic light by attaching this Bottle holder to the Handlebar Brace. The shape of the bottle has a suitable depth and the size can be adjusted. It can hold a thermal bottle, but if it becomes too heavy and affects huddle operation, I will attach it to the Engine Guard as well. The only drawback is that once the Holder is installed, the angle cannot be adjusted without disassembling the Holder. View detail