Reviews
It works fine
It was easy and fixed my phone with no problems. View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/p05-img-KS219A_TS.jpg)
Sideways orientation for smartphone mount○.
This is a replacement for DAYTONA's Smartphone Holder.
Body and Bracket are Material:I chose it because it is aluminum, seems sturdy, and looks small and unobtrusive.
If the phone is clamped in the normal portrait orientation, there is no support on the bottom side, and I don't want it to fall if it gets loose, so I turned it sideways and clamped it. I am self-satisfied that it is more convenient because the Navigation map looks wider this way (laugh).
The body and bracket are ball joints, so it is convenient to change the orientation freely, but I am concerned about the durability of the nut for fixing the body because it is made of brass. And it is made inexpensively in China.
View detail
Price suitable
[How is it used?
It was installed from when I bought XJR400R.
I don't like the Smartphone Holder around the Handlebar, so I used it a few times and removed it.
Was the one you received as per Image?
I think it is exactly as pictured.
How was your experience with it?
The comfort of the product is commensurate with the price. I didn't think it was particularly easy to use, but it was sufficient for my needs.
I was concerned about Hold strength.
[Points to note]
None in particular
How did it compare to other products?
I had another Smartphone Holder, but there is a price difference, but, honestly, that one was easier to use.
If it is a low Engine Displacement Volume system such as Scooter, I don't think there is any concern about falling because Speed is not produced.
View detail
Hold tight!
The angle and direction can be adjusted freely and it holds firmly, so it is stable and good.
There is no worry that it will fall off.
View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/ks257A474400_TS.jpg)
It's surprisingly useful.
I'm on a Sidecar made in Russia, Ural GEARUp 2015 MODEL.
I bought this to mount my phone instead of Navigation.
Quantity the phone:I have to tighten the Dial on the Right Side to set it.
If you tighten it strongly, it will interfere with the volume Switch on your phone.
So I tighten it loosely enough that it doesn't fall off.
I bought it and used it for more than 1 year and toured Hokkaido, Shikoku and Kyushu.
No one had any Trouble with breakage or dropping the phone etc.
It looks cheap, but it is very useful for us.
View detail
It's stable.
I actually drove with my phone on it and was able to adjust the angle and direction freely and the screen was very easy to see. I don't have to worry about it falling off because it holds my phone stable. When you take it off, it is convenient because it is One-touch with Release button. View detail
Cheap, but difficult to stabilize
I thought I could hold the four corners of the phone in place, but it was rattling.
There is too much rattle and I'm afraid my phone is going to fall out while driving.
I can't use the Tie Wrap without feeling like I have to.
There are also gaps at the top and bottom, but that's part of the structure. 。 But I think there are too many gaps.
If the Motorcycle is not subjected to sudden vibrations or shocks during street riding, is it barely usable?
But maybe I shouldn't complain because it's cheap.
I think it can be used if it is fixed firmly with Tie Wrap etc.
View detail
SimpleHolder
Bought this to mount my phone around the Handlebar and use the Navigation feature.
In order to cover the general Handlebar size, two kinds of collars for Size adjustment are included, and it is used after it is attached.
It looks SMART and holds the phone firmly in place, but you may want to purchase an additional thin Rubber sheet to prevent scratches and color slippage on the Handlebar.
The only way to secure your phone is with the Clamp mechanism, so I'm gonna fall on impact. It is not suitable for the person who is worried about it, but I think that it is not a problem because it does not falter even if it gives a considerable shock.
View detail
If you're not wearing your phone, you're going to freak out.
I first bought the Full cover Holder for rainy weather, but my phone runs out of heat in hot weather, so I bought an additional one for sunny weather. The Hold function of the phone etc...the basic parts of the phone are fine, but the vibration freaks me out when I don't have my phone on. When I don't have my phone on, I remove the Holder itself. However, I don't think it's a bad cosmetic product. View detail
I think it's a passing grade
I install the rubber sheet on the Brace bar and use it Wrap it around and pinch it in the Sleeve and close the Clamp to secure it to the Brace bar The Clamp should be movable between the Sleeve and Clamp rather than completely fixed It seems to be designed to increase the range of motion of the phone in
The construction of the Parts that hold your phone in place is more solid and sizzlingly heavy than I expected It looks reliable
I tested it by cruising 100 km on the highway, but the problem of the screen is hard to see because of the shake There was not
I am not sure how long the product will last due to the plastic clamps
View detail
I'm sure you'll agree with me when I put it in there
There are a lot of these products out there, but are they really not falling off? I couldn't get it out of my head
So, I'm using "Galaphone We found our product when we looked for a folder that is compatible with
The price wasn't too high, so I bought it to try it out
I received the product today and I pinned it down as soon as I could, lol
The result is a GripArm attached to the GripArm that clamps a mobile phone (phone) We found out that it can be fixed firmly with the Cushion material
Also, when you remove it, you can press the Release button and you can remove it without any difficulty (I only hope that this function does not become an enemy...)
It is easy to join to the Exclusive Bracket (sold separately)
However, from the clamp part to the holder part may be too long If screw is not tightened firmly, the screen seems to turn to a terrible direction by deceleration Getc
View detail
![[iMMER] Smartphone Holder](https://global.webike-cdn.net/photo/impression/7e/7e9011117d0e364f05d308e72e9e0416L.jpg)
Retention is high
I was worried about falling because there was no catch on the bottom side, but I apologized and left my phone on and Dirt I didn't fall down when I ran
I am satisfied with it because it is inexpensive, Compact and looks the same as the Large
View detail
It's not ideal
As a product, I don't have any problems with it at all I feel that the product is a bit cumbersome to put on and take off the phone because it does not come off easily The product is stable and in good condition when installed View detail