Reviews
It's a bit expensive
I want to mount my phone in a position where I can see it easily on my Racer9GT, so I have a FairingBracket installed.
However, the bar to mount is 12mm, which is considerably slimmer than a handlebar, so I had to use a regular mount base with a Gon Seat or something like that, but I found a product that is perfect.
It was originally designed to be attached to the bar portion of Mirror, but the size was JUST right. Spacer also comes with several sizes to fit various sizes, so it can be used for other purposes.
The Base that originally came with the RamMount was ported to the other Motorcycle, so the Arm and Body can be used.
Still, this price seems high for Base alone, but...,
View detail
for Pipe Handlebar ramMount base.
To attach spco NECTO Smartphone Holder to ramMount Base,
for Pipe Handlebar's Base.
REBEL1100 has a thick handlebar, so I bought the L size,
It was a little too Large, but with the included Tape and Adapter
It came on perfectly.
Ball headMount and ball head mount are separately used for 1 inchBall.
I put a Short arm on it and put spco NECTO's Base on it.
With ramMount's advantage of Flexibility,
It is now easier to attach a phone, even around a slightly cramped Handlebar.
ramMount is Firmly able and secure,
It is also easy to use, with a wide variety of Parts available.
View detail
Smartphone Fixed Band. poor quality.
This is a Single Item of Smartphone Fixing Band with RAM Mount.
I bought it because the first one I bought with Base and Mount was torn off.
Made of Elastomer, it stretches like a rubber and holds the Smartphone in place.
The band has a small tear like a slit at the edge of the band shape, perhaps due to a molding defect. When the band is pulled to secure the Smartphone, the tear is stretched and the slit gradually deepens. It is a consumable item, so this may be a device to make it wear out quickly.
If this is the case with OEM Products, I don't know if there are any, but maybe the Copy products are better.
If nothing is done, it will eventually tear off, so I heaped some Cemedine SUPERXBlack on hand in the cut for now to extend its life. Hopefully it works.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It can be used normally
I installed this product when I installed the bar end mirror. It is a little rough in construction, but it is fine for use. However, there is no spanner hook to tighten the screws, so I had to apply screw lock when I installed it.
However, I have changed the Bar end mirror now, so I do not use it.
As a product, I think it is normal.
View detail
A must for RAM Mount installation
The quality seems to be not so good since BALI is still present on the ball portion, but the installation itself was not a problem.
I have it mounted on a ZETA Handlebar and there is no wobble at all.
View detail
Is there a mistake?
I couldn't believe my eyes at the difference between the statement and the merchandise.
What's his mistake?" I feel a little lost.
View detail
It cannot be fixed firmly at the place where you want to fix it.
I tried to hold my phone in place, but the vibration of the motorcycle and other factors caused the Quantity:Pair (for Left and Right) It will be off by a few inches.
It was not a defect when I confirmed it by the inquiry etc., and it was said that it was originally made like that.
So even if you fix your phone in a straight line, it will be at a slight angle when you are running.
If you're nervous, don't do this.
In addition, if you are not careful when inserting your phone, such as the iPhone, the XGrip will interfere with the VolumeButton and the volume will drop, so you need to be careful, although it depends on the model you install.
View detail
FirmlyHold
It is difficult to attach the parts used to attach the Top Bridge well.
I'm not sure if this product is the cause, but it breaks the Camera on my phone. There are several people around me with this symptom, so I think countermeasures are a must.
View detail
It's pretty sturdy.
I wanted to drop and fix my phone, so I bought this one, which has a good reputation.
I get it, open it up, and there's no Instruction Manual at all! Well, I can just about understand. (Lol)
However, I don't know how to use the attached Cap? or instant glue, so I don't use them.
I couldn't use Glasses Wrench, because Nut for installation is Inch size, so I used MONKEY. This is a pain in the ass.
I put my phone on it, but the anti-falling rubber thing is too tight because my phone is a large size. It seems to break someday.
The fixation itself is gussied up, so I ran around for a day, but there's no sign of the phone falling.
View detail
Check the power supply and volume position on the phone side.
Installation is very easy as it uses Clamps. If you have more than one motorcycle, you can use a BallClamp for each of them.
On the other hand, it is difficult to avoid the switches of the smartphone because of the structure that sandwiches both SIDE. In addition, the rubber for fall prevention was cracked within a year and torn off the other day.
Although it is convenient as RAMMounting system such as the convenience of the attachment and the point that the angle can be freely adjusted, it is about 50-60 points as the feeling of using Smartphone HolderSingle Body.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
I need to be able to hang tools.
It is convenient because the Mount base for RAM can be added to the Screw hole of M10.
You can't hang a tool on it so you need to grab it with ArmParts and tighten it.
I've never had it come loose while driving by just grabbing it with the Arm and turning it.
It's not Firmly tightened, so I hope they improve it.
View detail
Not that you need it as a spare, but if it runs out, replace it.
I bought a set of Ram Mounts in August of 2019, and for a while I didn't use this Elastic band, but after an incident where my phone popped out on a large step and hung on the charging Cable, I made sure to put it on properly when using it.
Of the four corners of the phone, I used only two corners of the diagonal, but this may stay in the four corners without Case because there was Ring to put the finger in Case (iPhone8) of the phone. (Probably impossible)
There was no problem at all to keep it fastened with 2 corners, but I feel that it is difficult to fasten because Rubber is hard (not much elasticity), although it may be because Ring is on the back of Smartphone Case.
Because of the lack of elasticity, it was hard to tell how much the Rubber had deteriorated, and it suddenly broke like a tear.
View detail
Rider's wear rate is high.
I was unsure about buying my first smartphone holder, but the Rider around me had a pretty high probability of using it, so I talked to them about it and bought it afterwards.
The motorcycle I installed is a Z900RS, but it was helpful to have the mounting bracket included for the OEM Taper Handlebar.
Also, both the Handlebar side and the Smartphone Holder side have a ball joint-like root of the Arm, so there was quite a lot of angular flexibility.
The only thing that troubled me was that the Nut size of the Bracket that fixes to the Handlebar was 11mm.
I was installing it in a rundown. 'Not 10mm? And then I borrowed an 11mm Wrench from a friend.
As many Riders use it, it feels fine and I don't feel worried about my phone falling out.
View detail
I'm good at being tough, I guess.
The parts to be installed are very simple and just screwed together, but the workmanship is poor.
The hole for the U-shaped part was out of alignment, so I had to put a lot of force into it. The paint came off while I was screwing it in.
Well, I don't care if it's attached and peeling because that's the part you can't see.
I'm using an iPhone XS Max, which is the largest Large size phone that can be pinched with this Mount.
When you insert the XGrip into the XGrip, you need to widen the XGrip to the fullest extent and insert it at an angle, otherwise the quantity:Cannot be set.
It also interferes with the volume and power buttons, so the Quantity:It cannot be set. So you have to pull the tether (Elastic band) so hard that you can't hook it.
It's a small complaint, but once you get to see Quantity:You don't have to worry about it falling off once it's set.
The body can be easily moved in the Arm, so you can adjust the position so that the meter and the phone screen do not overlap.
I'm complaining about a lot of things, but I would like to continue to use the Point as it is.
View detail
heavy
One word:heavy
if you have an iPhone, take the SIDE button
I'm thinking of going back to DAYTONA in a few weeks
it's not a good idea for iPhone users
View detail
Was it too tight?
To install an iPhone
I thought of any chance and bought it.
Honestly I do not feel like falling down without it,
It will be safe for minds such as high speed.
However, feeling too tight
You.
I think that it is okay even if it is loose a little..
View detail
Ram Mount X-Grip holder
It is a purchase on consent as I was checking your impressions
About 1 centimeter from the structure after mounting the smartphone Quantity : Pair (for Left and Right) I do not fall off, but I think that those who are interested after checking other products
View detail