Reviews
With a sense of security.
If you are looking for a bar mount, this is it.
Bar mount at 1 inch This is a safe bet.
View detail
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
Size selection with room to spare is recommended.
I had been using DEGNER's Porch, which is compatible with P.A.S. Mount, and purchased it to install it in a vertical position in combination with Meter and other equipment due to a change of vehicles.
Back provided for Camera [Color] It is a Clear window, but it also has a secondary use through which you can see the meters on the other side of the Porch.
The size of the iPhone I am using can fit in the Smallest Type of the same series, but this size was the best for me because it allows for more room when considering Cable's handling.
View detail
For those who don't want to stand out with SimpleStyle
There are many different Smartphone Holders, but I think this product is the most discreet and easy to install.
In fact, it is so close to the Top Bridge that its presence can be eliminated.
If you want visibility, you can choose a Type to attach to the Handlebar.
Installation on the Holder is simply a 90-degrees rotation to fit the groove.
It will not loosen or fall off.
Satisfactory product
View detail
No worry about falling off.
There is no sign at all that the 120km/h section of the New Tokyo-Nagoya, the Decoration bumpy road, or anywhere else you might fall off.
Vibration absorption capacity is also very high.
I have tried a few and they are by far the most secure in preventing drops, and if you are really worried, you can easily lock it with Lever.
It is very easy to use as it is easy to connect Charger.
The only complaint I have is that it is difficult to clean because dust tends to accumulate in the groove where it is fitted.
Also, some people have a problem with the way it looks. (Depending on Motorcycle) It may seem a bit lumpy.
View detail
Easy to use
[How is it used?
I chose to install a new Smartphone Holder on my TouringMotorcycle and ultimately ended up with this product.
Anything as long as it's cheap!" I am very happy to be able to do this, And not too much of Plastic's cheap stuff, either." For me, I'm a bit of an either/or kind of guy. That's it! It seemed like a good idea.
Also, my phone has many buttons on the Right side, so I could not use the type that is inserted from the side, so I chose the type that is fixed at the four corners.
Was the one you received as per Image?
I chose Black and it was just like the Image.
How was your experience with it?
First of all, the Included Parts:are substantial for the price.
There is a diameter conversion rubberretc.Pattern and it is not difficult to install.
When the middle Button is pressed, the four corners are Fit to the phone.
Release is Quantity:Pair (for Left and Right) The only thing you need to do is to press the "+" and "-" prongs, so everything can be done with one hand while doing Gloves, which is easy.
[Points to note]
Make sure it is firmly secured before starting.
How did it compare to other products?
I had been using Chinese several hundred yen ones, but I felt they were well thought out with good strength and ease of use.
【Review】
I used to think that KaEdia was cheap or bad, but when I bought it this time, I got a good impression of Included Parts:, usability, etc.
As a smartphone mount, I have no complaints.
View detail
Modern necessities
I think Attachment is necessary in today's smartphone-essential world.
The clamp part is solid, so it seems unlikely to fall off while driving, but I am just a little worried about it digging into the Handlebar and scratching it.
It can be securely fastened to the Body even while still in the Smartphone Case.
There is also a locking mechanism so it won't rattle while driving, and it has an insurance band to prevent it from falling.
However, be careful not to use this band in the wrong position, as it can manipulate the volume button.
Vertical and horizontal rotation is also easy, but it is excellent because it does not turn on its own while driving.
It looks like you can choose with or without vibration control components, but I wondered … if it makes sense to go without.
They say that without vibration-damping components, the anti-shake function of the phone often breaks down! (According to a friend)
I decided to install it in the middle for visibility of the meter, but I think it would be better to install it a little closer to the left.
I will try various trial and error.
View detail
Simple and beautiful.
Simple and beautiful.
The finish is good and it blends in like OEM.
It is easy to install and remove the phone, yet there is no gapping or falling off. I think it is a well-made product.
I have been using it for Navigation with iPhoneSE2 for about 3 years. No particular negative effects on the phone.
I have heard that some models with a high-performance Camera may break due to SR vibration, so I haven't tried that one yet.
The price is not cheap, so the cost performance is not so bad.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It worked on my iPhone 15Pro.
[How is it used?
I was considering a Smartphone Holder to view Navigation on my BMW R100 Twin suspension.
Was the one you received as per Image?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
Was the installation difficult?
Wiring around the Handlebar may be Large strange. The only thing to do is to wrap the included rubber parts around the handlebar, and then hook and fix it with a bracket.
I used DoctorRubber's Handlebar Grip Rubber as an anti-vibration measure. We recommend it as well!
https://www.webike.net/sd/25949395/
How was your experience with it?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
To remove the phone, pull the red lever in front of the reverse side toward you.:Pair (for Left and Right) The claws of the "I" release.
[Included Parts:were they on?
All Included Parts:required for installation are provided.
View detail
Vibration Isolation Outclassing
A little soft, but firm and very good.
We will make it a good companion for future Touring.
View detail
Excellent workability
Best quality as Smartphone Holder. A product with no complaints in terms of retention, security, and workability. View detail
Smartphone Holder is the best!
The fit is so good that you don't feel the anxiety of saying your phone is going to fall off. View detail
Easy to use
It is convenient to attach a phone with One-touch. View detail
Highest & High
The product was satisfactory for the Large change, as was the reputation. View detail
I'm glad I sold it.
While transferring DAYTONA's Smartphone Holder from MONKEY to ZZr, I accidentally lost this product that I purchased this time and was about to give up using the Smartphone Holder itself when I went to Webig to see if they sold Rose! I was about to give up using the Smartphone Holder itself when I went to Webig to see if they had any Rose products for sale. Thanks a lot. View detail
To fix your iPhone
Purchased to install on Handlebar
Large and well fixed just right.
View detail
Fits: ROYAL ENFIELD Continental GT 650
With a sense of security.
Re-ARAI's is an authorized dealer of Royal Enfield West Tokyo, so we put it on before delivery.
I am not sure how to install it, but he said it was expensive because of the Top Bridge screws.
I'm not sure if it's something you can DIY yourself, but once you have it, this is the only way to go.
Separate handle, so normal installation is not possible.
I think you should call and ask before you buy.
I use the combination in the picture. Even if you don't use RamMount, KaEdia is a better choice.
Hold's sense of security.
View detail
Easy to take out
It can be easily removed when not needed.
This is a recommendation for those who want to make the Handlebar area reflective, as the Snap and the Holder type tends to look clunky even when the phone is not in use.
Touch controls are almost unresponsive with the Gloves on. I don't mind, though, because if I only register Navigation on my phone before driving, I hardly ever touch the screen.
View detail
It works fine
It was easy and fixed my phone with no problems. View detail
SP CONNECT SPCO NECTO Smartphone Holder MotoMountPRO
I replaced my DAYTONA Smartphone Holder because the lock had become too tight. I think the texture, installation operability, and design when not wearing the phone are also good. View detail