Reviews
It's surprisingly useful.
I'm on a Sidecar made in Russia, Ural GEARUp 2015 MODEL.
I bought this to mount my phone instead of Navigation.
Quantity the phone:I have to tighten the Dial on the Right Side to set it.
If you tighten it strongly, it will interfere with the volume Switch on your phone.
So I tighten it loosely enough that it doesn't fall off.
I bought it and used it for more than 1 year and toured Hokkaido, Shikoku and Kyushu.
No one had any Trouble with breakage or dropping the phone etc.
It looks cheap, but it is very useful for us.
View detail
Super convenient!
I bought this because I wanted to use a map app on my phone.
I looked at some other companies' holders, but I was dissatisfied with the design and strength, and I chose this one which seemed to be just right because of the high price of Brown's bitterness in the first place.
When you actually put it on, it is strong and stable enough. The phone can be fixed firmly, and the position adjustment is also highly flexible.
If I wanted to, I would have liked to have a joint that could rotate back and forth other than the one that attaches to the Handlebar, but that would have reduced the strength, so I guess it can't be helped.
The hold is outstanding. It holds so tightly that I think it won't fall off even if I don't lock it.
I actually ran it without locking it once ….
It is inevitable because of the type of car, but the position of the holder and the tank is quite close, so the tank bag may interfere with some things.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
So-so OK.
The Arm that holds the phone is not strong enough.
I'd like to see Arm's Material be the genus Gold instead of plastic.
Also, the SiliconRing ran out after about a year, I wish I had one in Spare.
I thought...
View detail
I'm slowly adding more equipment …
[How is it used?
We did the install last weekend!
Was the one you received as per Image?
I had to check in advance at the supply store, so I did not betray my expectations when I installed it on my actual motorcycle, and it was just like Image!
How was your experience with it?
Sometimes I forgot to remove my phone because I wasn't used to attaching it. (^_^;)
I'm also planning to buy Income, so I'll be using it more often in the future.
How did it compare to other products?
It's fixed more firmly than other products, so I feel more secure.
[Accessories]
It was easy to install even for me as a beginner because it came with the Instruction Manual!
The Hexagonal Wrench is also included, so you don't need any special tools.
View detail
It is strong.
This is my second Smartphone Holder and I'm using it for my Eliminator.
I've been using it for two and a half years and it's as durable as it was when I bought it, no problems.
The only thing you need to worry about is the positioning of the Button and Bracket on the side of the phone.
View detail
Hold tight.
This Smartphone Holder can be easily attached to the Louver of the air conditioner vent and holds your Smartphone securely and safely. View detail
It is easy to use
It's waterproof, so you can use it on rainy days.
Visibility, if it's too sunny it can be hard to see, but if you adjust the angle it's Large sturdy.
It is possible to use it either vertically or horizontally in either direction, and I think that there is no loss to have it because I will often use a smartphone instead of Navigation.
View detail
easy to attach
I think the ease of mounting the phone is pretty excellent.
The product itself looks a little cheap.
View detail
Size is good.
It is convenient to use the Touch panel while it is in the Case with just the right size of the Eye Fan. I can change it to the direction of the favorite even if it is vertical or horizontal, and Cushion is good and is very excellent in durability and waterproof. View detail
I have it on my tzr250.
I'm a 50 year old father who has been Pocketing and Navigating his way around the web. replica Purse
Now, for RAM, the Dio110 was easily attached to the Mirror, but not the tzr250.
I called RAM and sent them a picture.
I think the top of the front fork is 8mm. Why don't you try to open it? So I opened it after a long time, but it flew off at the spring. I thought I was right, but I finally got it right with the T type bracket.
I shifted the grip of Left and put this.
After that, there is only Screw to tighten Handlebar, and this is dangerous, so I gave up.
View detail
○
I think it's a little hard to attach the phone, but it's acceptable.
It is well made for the price.
View detail
It may not look like it, but it can be fixed Firmly.
I can't get a SMART holder on my phone because it's a waterproof, heavy duty Torque model.
I tried many things and this was my choice.
I was worried because I only pinch it, but the grip force of Rubber is strong and there is no problem without Gap.
He's hooked up to Strap, though.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
I feel safe.
It holds the Smartphone securely and gives you a sense of security while riding. It can be adjusted to any angle so it can be attached to any Motorcycle or Handlebar. It is well made and of good quality. View detail
It is GOOD that it is not conspicuous when the optional Smartphone Porch is removed.
One of Ruff AndRoad's Smartphone Mounting Attachment. It can be used in combination with the Smartphone Porch and other products sold separately.
Although it is a very ordinary mounting hardware, the design is not noisy and GOOD when the Smartphone Porch is removed.
The price is higher than Body's Smartphone Porch, which is something I can't explain;
It looks sturdy enough for that, so I guess it's okay?
I think even a complete beginner can install it.
I was able to fix it on the OEM Handlebar of SR400 without wobble.
As for the Smartphone Holder of Motorcycle, there seems to be a case of breaking the Camera of the smartphone by vibration, but it seems not to worry about that because it goes through the Smartphone Porch once.
View detail
Simple but low price is GOOD
It's just a standard motorcycle phone mounting Porch, but the texture is decent and it's practical. The best thing about this product is the low price and easy to buy.
It seems to be weak in the rain, etc., but I thought it was possible because I put the phone in the Waterproof Bag when it rains.
Because the Mounting Attachment of roughAndRoad is abundant, the main purpose is to combine it with that place. There is no particular dissatisfaction about that, either.
View detail
Used for iPhone 11
I bought this because the Design wasn't bad for attaching my iPhone 11.
This is my opinion after using it for about 4 months.
Ease of use is very easy and convenient to use. (It can be attached while wearing Gloves, etc.)
When I first used it, I was concerned about the movement of the part that holds the phone, but after I greased it up, the movement got better, so if you're concerned about that, please try it!
If it is thin iPhone Case, I can insert it while putting on Case, but if it does not appear so, I take it from Case and become the feeling which installs Body directly.
It is not equipped with functions such as vibration absorption.
I don't think the Bolt will ever come loose as long as it's secured properly!
I haven't felt any worries about the phone falling off so far, so I think it's safe to use.
I highly recommend this product because it's not that expensive and it looks rather nice!
View detail
The texture is good
The phone I installed is Xperia XZ3 (with Notebook Cover)
You can completely clamp with the replacement bracket for Large type phone.
360° rotation is possible, so it can be installed avoiding SIDEButton
Sponge for scratch prevention is attached, but the adhesion is a little weak.
Sponge on the Arm side is coming off.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
Mirror hall.
If you use Mirror's hole or an empty Screw hole, it's not usually noticeable.
The Spanner groove is also left uncut and round, so you may need to be a little creative to install it.
And the build is rough.
View detail
Simple and robust
Simple and good.
Durability is also not a problem.
But the construction is rough because it is Made in USA.
Easily removable spec. and expandable with a variety of parts.
The mounting pattern is infinite.
View detail
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a Smartphone Holder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail