Reviews
for peace of mind
So far, I have not encountered any Trouble or problem with the Smartphone's Camera function, so I wonder if it is a good thing? View detail
Firmly held.
I bought it because I can rotate it 180 degrees and use it without interfering with the SIDEButton on my phone. (The phone is XPERIA)
Therefore, a Package picture is a Quantity:Pair (for Left and Right) I use it in reverse and have no problems.
The Hold is solid and the phone has never wobbled while driving.
To be installed on a 250TR Handlebar. DAYTONA:Conversion ClampSpacer was also purchased at the same time.
View detail
I put it on my insurance.
It is not used for KaEdia's Holder.
The two holders used were each from a different Manufacturer.
the best part
I don't feel it will fall off even if I don't use it, but if I use this one, it will be held tightly and may not fall off even if it falls over.
I only use it for two stops because it's a hassle, but it stops Firmly.
If the spherical thing on the back is in the Center, it can be used for almost anything, even if it's not KaEdia's Holder.
bad point
It is a hassle to apply and remove the rubber in four places every time it is attached or detached, and it is no longer possible to remove and detach SMARTly.
It is even more troublesome with Gloves on.
Cannot be removed instantly when it suddenly starts raining.
I couldn't find it in WeBig's product page, but there are 3 pieces in the package.
3Quantity even if you need 3 cars:Do not buy Set.
If you are a worrier who never wants to drop it, you should put it on.
Removal and removal will be troublesome....
View detail
Shorter than buying separately.
I had been using Smartphone Holder3, but was afraid of recent Camera damage and was considering purchasing a Vibration Limiting Unit, so I chose this one when an integrated one was released.
The original one was installed on a Hara 2Scooter for commuting.
View detail
I would choose the phone.
I bought it because it is famous. I am not worried about it falling because it is firmly fixed.
However, due to its shape, there is a possibility that the button on the phone may hit the device, and while the Xperia5 had no problem, the AQUOS WISH had a button problem. Before purchasing, please pay attention to the position of the button on your phone.
View detail
Even with the phone Cover installed, I managed to get it to work.
I am replacing a Daytona MiKnowla OEM. When I changed my phone to Sharp AQUOSR6 and installed the Cover, the vertical side became 17cm, so I had to remove the Cover and install it when wearing Motorcycle for a while. It became more and more troublesome, so I purchased this product and it LimitClear even with the Cover installed. Personally, I think it is a good idea. Smartphone Holder I don't like the chunky Aluminum because I don't want the machine feel of the Aluminum, but the convenience is much improved. I don't feel like my phone is going to fly away when I use it, so I think it's up to par. If you have similar problems, I think you will not regret buying this product. View detail
Smartphone Holder that looks SMART
Purchased to attach Smartphone to Motorcycle.
Apart from this, a UniversalSmartphone Case from SP CONECTO is used.
Removing and attaching the Smartphone is fairly easy and only requires a 90° turn. It is the fastest way to attach and detach a Smartphone.
There are similar products, but Advantage is the Large size in terms of quality and ease of removal and attachment with one hand.
It can be detached by simply rotating it, but there is no locking mechanism such as a turnstile, so some people may be concerned about it falling off. However, the
If it is firmly secured, it is unlikely to fall.
View detail
Installation to Gixxer
I can only upload a few pictures, so here is the installation section.
Adjust the Screw→ of the Bracket to match the Phone.
I've seen a lot of Amazon Reviews. I tightened the screws and the plastic part broke off! The quality is too bad!"
but, well, I don't think so if you do it with normal additions and subtractions.
The upper part of the Body and the Bracket are joined by a grooved disk. If this is too tight, the Body cannot rotate freely horizontally or vertically. If it is too loose, the phone cannot be rotated freely.:When it is not set, will the Bolt come off and drop out due to vibration? Just right is Torque 3.6Nm, they say. Anaerobic adhesive (Screw looseness stop) I'll even use it …
I've closed this one too many times. I rotated the Holder and the whole disc cracked. or something like that (Lol)
I tried closing it by hand and got a good feeling, but there was no guarantee that it would not fall off even if I closed it with Torque 3.6Nm, so I decided to put rubber packing on it. It felt really good!
Cure with Tape, cut and fit the enclosed CushionRing.
Beyond this point, frame along the groove of the Ring. Tuning Screw." I just add or subtract the "+" or "-" to a good degree, snap it in place, and that's it. I don't even plan to remove it. Tuning Screw." to squeeze in Wrench.
Tilt angle adjustment with Screw above it
Cool!!! I couldn't post a picture of it. (Lol)
View detail
Mounted on ZX6R Tank Fixed Bolt
[How is it used?
ZX6R G type for creating a phone mount.
Was the installation difficult?
Simply remove and replace Bolt.
A separate M6 bolt of about 50mm is required.
The OEM fixed Bolt is M6 30mm.
How was your experience with it?
I used it to create a pedestal to hold the phone in place with Rec Mount.
Generally, I think that Multi Bar is often installed on ZX6R, but I chose this product because I wanted to make the steering area as refreshing as possible and did not want to put a large and conspicuous Multi Bar or Smartphone Holder on the ZX6R.
The Smartphone lock can be removed from the Arm when not in use, leaving only the ball joint. When not in use, the entire Arm can be removed from the Smartphone lock, leaving only the Ball joint.
[Disappointment.
The texture of the resin is poor and looks cheap.
It is fine for use, but it has a "Made in USA" feel to it.
[Notes]
Ball diameters may differ between Ram Mount and Rec Mount, so it is best to check for compatibility before purchasing. Some products are compatible.
After installation, Quantity:Pair (for Left and Right) The only thing that needs to be checked is that there is no interference with the Top Bridge when the Handlebar is cut to
View detail
Before your iPhone breaks
Many of my Motorcycle friends have broken their iPhones due to vibration. The new iPhone model has no fingerprint recognition and only face recognition, so it is very inconvenient if the Camera breaks. Since the iPhone New Model has no fingerprint recognition and only face recognition, it is very inconvenient if the Camera is broken.
Is the Holder itself dangling? It seems that there is a difference between the wobbling and the slight vibration from the handlebar, which is similar to the iPhone, and the vibration absorbing unit is as large as a 500 yen coin. (Lol) This would work well. It looks like it can be installed without the Vibration Absorbing Unit, but the height of the integrated unit is not the same.
Plate is plastic, but brackets are material.:Aluminum
The claws on the Defferential Gearo are deep enough to hold the iPhone 11-13, but only the claws on the moving parts are enclosed in a deep size.
Made in Japan tickles
I don't think the aluminum parts will break, and the quality is not too bad, but the claws are plastic, so I wonder how long they will last… I wonder how long they will break if I put a lot of pressure on them as they age.
So the quality star is 4
I wondered, but all PartsRepair Parts are out there, so I guess to some extent it's wear and tear Parts. (SlideBase set is 528 yen)
I think the thought that if you fix it, you can keep using it is Large cut. That's a very favorable attitude.
The reason why the Cost performance is 5 is because the price of SYGN HOUSE is from 28,000 yen like this, so it is cheap even if you replace the consumables. (Lol)
View detail
Tightly fixed
I originally used DAYTONA's old Type.
However, with this, the SIDEButton on the phone was pressed, and it was hard to use, so we changed it to this one.
It is easy to use because it locks securely, and the fact that it can be rotated is also a good point, although this is a matter of taste for different people.
View detail
If your phone is Waterproof Type, this is the one. (Spring & Autumn)
There are many different products available, but I feel safer with a physical full Hold. Furthermore, in spring and summer, I am concerned about my phone running out of heat, so I feel that the Type with wind exposure is better. I use it with the Option product for vibration protection. View detail
I was worried my phone would break.
I heard that the Camera of a smart phone is broken and the cause is related to the fact that it is installed on a motorcycle.
It has never broken, but when I touched the phone while driving, I could feel considerable vibration from the Engine.
Quantity of smartphones with this product installed.:When I set it and touched it, I felt that it moves very gently and that I can expect it to absorb vibrations. When I touch it while driving, it still feels better, but the vibration from the engine is not zeroed out. As stated in the product description Vibration Reduction was (^_^;)
It is effective in reducing vibration from the road surface and Engine, and will probably reduce the impact on the phone, which is better than nothing.
I was worried about the position after installation because of its thickness, but Quantity is just barely enough to prevent the phone from hitting the cowl.:Set is ready.
I also feel that the screen is closer and easier to see.
I would not feel inclined to drive with these off, so I guess I'm mentally secure!
View detail
Vibration absorbency seems to be good, but it's too cheap and disappointing to feel like an afterthought.
[How is it used?
already DAYTONA:Smartphone Holder3 for DAYTONA Motorcycle Item number:17232 I had installed it, but when this vibration absorbing Adapter product was released, I adOn to it.
Was the one you received as per Image?
It is too large for a retrofit add-on. It's a pity that it's too large and too high.
How was your experience with it?
Vibration absorption seems to be good, but since it is a retrofit, it is very difficult to attach a smartphone to it because the product moves around when you try to attach a smartphone to it. I am very disappointed that it feels like an afterthought.
[Points to note]
Since it will be a retrofit, the height of the product will affect the phone to the front, so some people may have to change the current installation position. And while driving, the phone will move up and down quite a bitQuantity:Pair (for Left and Right) So I really wonder if this will not affect my phone.
How did it compare to other products?
Most disappointing is the new "DAYTONA:DAYTONA" that integrates these Smartphone Holder3+ IH2100Rigid Item No.:25077 $8,334 (tax included) The fact that there was a "I'm sorry, but....
Smartphone Holder3 for Motorcycle Item No. 17232 5,094 (tax included) +a little more than usual This product is 3,850 yen (tax included) =8,944 yen (tax included) It is cheap and looks Refreshing.
It's a little … is …
I think the new product is better for Smartphone Holder and vibration absorption from now on.
View detail
Installed on CB1300
I installed it on a CB1300SB SP. The diameter of the handlebar was about 22mm, but the supplied adapter was too tight, so I had to shave a little to adjust the inner diameter. Compared to the conventional one, it does not interfere with the charging port and the power switch, so it is easier to use. View detail
Made in USA for better or worse
It looks lumpy, but that's what it's for (?). I chose the Firmly for PhaBrett because I felt that it is Limit for a 6.4Inch Chinese smartphone in terms of size. Thanks to this, it can be installed with ease.
For some reason, the four rubbers attached to the end of the Arm are designed to be attached by yourself with the included adhesive. Also, the rubber that holds the phone from the back is asymmetrical and difficult to install, and one of the rubbers broke off. It is a consumable item, so it can't be helped.
View detail
Some wobble.
[How is it used?
Used to protect the expensive and delicate Camera of iPhone13 Pro Max.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
I have used the Camera for over 10,000 km and it has not been damaged, so I assume it is working well.
[Points to note]
A play is provided, perhaps for a mechanism to absorb vibration.
Therefore, when I touch the phone, it shakes, but it has not been damaged and has not fallen off, so I think Large is sturdy.
You may be surprised when you wear it for the first time.
Also, since this product will be added to the vibration absorbing mechanism, the position to mount the phone will naturally change (it will have to be moved upward by the height of this product). (It will have to be moved upward by the height of this product.)
For Clearance reasons, such as around the Handlebar, it may be necessary to change the position and angle at which the phone is mounted.
It is recommended to check with the Manufacturer before purchase how much the position will change.
[ITEMS TO BUY TOGETHER
DAYTONA Smartphone Holder3
View detail
It depends on the Large size and shape of the phone.
The Ram Mount holds the phone securely without a tether, but I hook up a tether every time for insurance in case of an emergency.
Depending on the LARGE size of the phone and the roundness of the Edge, my phone will run out of tether in 1.5 to 2 years.
I bought it again because I ran out.
It is expensive and a cheap consumable as insurance against dropping your personal phone while driving.
The person making the Unit Purchase of this product has already installed the Ram Mount, so installation is easy and only takes about a minute.
View detail
If you don't want to fail, this is the one.
Installation and removal are fairly easy, and the cost is good because no parts have been damaged in about three years of use. Also, since the position and angle can be freely adjusted, it can be easily changed on the spot if it is difficult to see. View detail
Can be fixed tightly, but high performance cameras must be used with care.
The camera can be fixed tightly, but if a high-performance Camera is attached, vibration will be transmitted and the camera will be easily broken.
I am using the phone I used before one to use Navigation.
View detail