Reviews
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
You can firmly install!
I thought that I used less frequently, but I was looking for it with an inexpensive Folder, but I chose this product to be unfit for Motorcycle too. You can use it with confidence while driving as expected. Because the Clamp part is a Quick Type, it is a little hard to install, but it will fit securely accordingly, and the point that it is possible to detach freely without a tool for theft prevention is the best except for using it.
We are installing Case for SH-09D.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
this is good!
Consider purchasing to start using iphone 6. At this time Manufacturer compliance was listed only up to iphone 5, I was worried whether it would fit, but you can use it perfectly. Easy to install, shrink both Arm of SIDE and apply Rubber Band OK. When removing, you can remove it by removing the Rubber Band and pushing the Red Botch. If installed properly, there is no shake. Even if it suddenly rained the other day, I immediately removed it and put it in the Waterproof Pocket and got wet..
After turning on this, you can also use Navigation with B + COM, listen to music at commuting, switch to radiko with a little signal wait. (Touch panel correspondence is recommended for Gloves) It is comfortable.
removal - It's easy to install, so you can quickly install on two Motorcycle and MTB rides that day. After that, charging will be soon, so if you have a power supply, you can use it comfortably even in long touring.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It is necessary and sufficient.
As a Smartphone Holder that is on sale at the moment, is not it best if you evaluate it only on the functional side.
Although it is an OEM of My Know LA, DAYTONA can be further adjusted according to the Handlebar angle of Motorcycle and it is slightly more expensive than the MI KnowL because it is devised that the fall prevention Silicon band does not come off, Very easy to use. However, indeed the texture made by SYGN HOUSE etc etc etc. It does not compare with - - - I think that it is a good product.
View detail
X-Grip holder
I was anxious to be honest because it only supports at 4 points,
It did not fall even if it was swinging with full force with hands in a fixed state.
In addition, Touring of over 500 km (Including high speed driving) But there was no problem.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Smartphone Holder
I transplanted from CB 400 SB to CB 1000 R which was on board before
The attachment position was attached to the bending position of the Handlebar, but since the degree of freedom of the Mounting Bracket was high, it was possible to install it at the desired angle.
Cellular phone is arrows NX but Hold property is also high and there is no Trouble without attaching attached elastic band.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
DAYTONADAYTONA Smartphone Holder for Motorcycle
Purchase to install the smartphone that is used as Navigation
The smartphone falls while driving everyone will be worried! There will not be things like it
Since you can install a color Navigation, you can also insurance with Strap
I thought it was a good thing for the price
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Attached iPhone 6Plus
When Holder was fully opened and pushed in, it was able to be installed. However, when you install this model, it is necessary to remove even a thin mobile cover. Also, as I forced it in, Holder's Sponge broke a bit.. Thanks to that, we are firmly fixed.
In addition, since you can adjust the thickness with the attached Sponge it will be just good feeling. I am not good at checking the item description, but I'm bad, but for those who are scrupulous, it is better to stop attaching iPhone 6 Plus.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Is it really φ22 ~ ...?
The company's Multi Bar Holder (φ22. 5) was purchased and installed, but it can not be tightened even if it is adjusted, it is gentle and hanging dangling. I got a story with Rubber in between, but I guess what it is like a Quick Type.
As for smaho installation we will lock it exactly so if you are On road you will not worry about falling too much. Easy to remove and easy to remove.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
This time "Rigid type" !
This for BirdCity "Rigid type" To
Change, easy to remove for SEROW
I decided to Combine (^O^) /
Both of the basic construction are the same
Handlebar Main pipe (22Φ) The
Rigid is less concerned about mischief
Is not it nice?
By the way Rigid is Base "Black" so
Quick Type is "Silver" It will be.
Those who care about that, please be careful!
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
In ZrX1200RNormal handle
In the case of OEMHandlebar of ZrX 1200 R, because there is Plate written as ZrX at Center, I was worried about space but because the width of the installation Clamp is Slim, it was dumb.
As if it was OEMOption SMART installation was possible.
View detail
Well. This is good product. Strong ands stable. There is adjustable clip , it is fit for my iPhone with/without phone case.
Well. This is good product. Strong ands stable. There is adjustable clip , it is fit for my iPhone with/without phone case. View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Shock absorbing material like Rubber hose ? is also attached so that a Handlebar may not get damaged in a Clamp part.I think that installation at a just right angle can be performed by almost all Motorcycle since angle adjustment is possible at two places
Shock absorbing material like Rubber hose ? is also attached so that a Handlebar may not get damaged in a Clamp part.I think that installation at a just right angle can be performed by almost all Motorcycle since angle adjustment is possible at two places besides
Clamp part.The right-and-left Arm of a Click type and a lower Arm fix three
Holds.The Arm of
lower part is a dock Connector of iPhone, and the form in which it does not interfere.Since there is also no Wobble under
run and also reinforcement by a Silicon band can be performed, it is safe.Although it is
made in Japan, a price also thinks that it is handy and it is the goods which thought well and were made.
View detail
Fits: DUCATI MULTISTRADA 950, DUCATI Multistrada 1260, DUCATI Multistrada 1200
It purchased for YUPITERU/ATLAS wearing. Although a few was regarded as whether a front Meter disappears, it can check firmly.The high speed and the general road were good.Although there should just also have been a thing which can attach the Ante
It purchased for YUPITERU/ATLAS wearing.
Although a few was regarded as whether a front Meter disappears, it can check firmly.The
high speed and the general road were good.Although there should just also have been a thing which can attach the Antennas of
OP, it has been coped with by the Digi-meter Stay.
View detail
It is a rhm Mount truly.Although I am using i phone 5, I am using adjustment on either side and a Hold of the up-and-down Spring, feeling easy satisfactorily at all.
It is a rhm Mount truly.Although I am using
i phone 5, I am using adjustment on either side and a Hold of the up-and-down
Spring, feeling easy satisfactorily at all.
View detail
In order to attach to CBR600RR, it is a Stainless type purchase.In the situation which cannot perform extraction and insertion of a key in the place which feels easy, attaches and works since it had indicated to the conformity table, and is called Test if
In order to attach to CBR600RR, it is a Stainless type purchase.In the situation which cannot perform extraction and insertion of a key in the place which feels easy, attaches and works since it had indicated to the conformity table, and is called Test if compelled --if the height of a Stay can be earned, it will become somehow and will meet -- going to a Home center as it is, since it came out and carried out -- a substitute -- the get ♪ -- I wanted to consider a Clearance common but to a slight degreeCan Parts change be provided with a Handle Mount type after
? It is also wasteful to rebuy all.
View detail
Since it was a Motorcycle of the Separate handle, I thought that he wanted the Navigation Bag of a Stainless mount.Since the thing of the SYGN HOUSE was too expensive too, it was not able to be crossed into purchase.Although it is the using feeling,
Since it was a Motorcycle of the Separate handle, I thought that he wanted the Navigation Bag of a Stainless mount.Since the thing of the SYGN HOUSE was too expensive too, it was not able to be crossed into purchase.Although it is the
using feeling,
and a Stay are touch called too somewhat cheap kana, but intensity is enough.Although a Bag is a system put between a Stay by a Velcro, the area of a Velcro does not have a totter greatly, either and there is no uneasiness.It is simpler than a Screw stop etc. and there is sense of security.Although it ran the
high speed, it was satisfactory at all.(Since it is a Full cowl and a wind hardly hits on a Top bridge, as for its own Motorcycle, there is no telling how be, by a NAKED without a Cowl)
Although the Gap etc. exceeded at the peak again or the gravel road under construction also ran, there was no uneasiness in particular.Since the Sponge of Gap prevention was in using the Rubber Bush for fixation in a Stainless, and a Bag, most vibration to apparatus was not felt.Unknown during a run, since it does not hit rain primarily, thanks to a Cowl, although it is
and waterproofness.If it is used since a waterproof cover follows, only nothing [ problem ] will be.A Cost performance is wonderful at this price with a Set in
and a Stay, and a Bag.
View detail
Although it was a Stainless Type, it attached to the its original work Stay.The Size of the Case is also right just and the smart phone operation from a Case also completely has no problem.It is a Recommendation at those who want to carry out the
Although it was a Stainless Type, it attached to the its original work Stay.The Size of the
Case is also right just and the smart phone operation from a Case also completely has no problem.It is a Recommendation at those who want to carry out the
smart phone instead of a Navigation.
View detail
It purchased in order to use it at the time of the Long touring in the Navigation of a smart phone. Although it became uneasy with whether attachment is OK now when it fixes to a Stainless, although it is simple, it shines just, and an auxiliary belt
It purchased in order to use it at the time of the Long touring in the Navigation of a smart phone.
Although it became uneasy with whether
attachment is OK now when it fixes to a Stainless, although it is simple, it shines just, and an auxiliary belt can also be used, feeling easy for a while.
Operation is possible to some extent, putting into the
Case.
Since the Cover of the Aluminum is attached to
Galaxy s3, since the portable holder did not enter, it is purchased.
View detail
He wanted to use the Navigation function of a cellular phone well, and eyes stopped at this product. In case of this product, a portable Mount is also unnecessary, and it is a sushi Clamp belt, and also when leaving a Motorcycle, removal is smooth and co
He wanted to use the Navigation function of a cellular phone well, and eyes stopped at this product.
In case of this product, a portable Mount is also unnecessary, and it is a sushi Clamp belt, and also when leaving a Motorcycle, removal is smooth and convenient.
A cellular phone is touchable from outside.
Inside the Porch, the Space into which a coin purse, a Credit card, and an ETC card are put is provided, and the payment of the tollgate also became easy.
Since a Navigation function can be used putting a Mobile Battery into a Porch and charging, it is dramatically satisfactory.
I think that it is convenient to a run since the lower part of the Tachometer disappeared in GSR when attached since the
Porch itself was a little large, but it is a portion of 0~1500 rotation.
Since the Top bridge of GSR differed in form in cb400sf etc. although it was
Clamp attachment Belt, and the Bridge had covered the Handlebar, it was OK although he was worried sufficient for distance.
On the contrary, since the bridge part was even, it could loosen, the Clamp attachment Belt could be attached that there is nothing, and neither the vibration under run nor a wind pressure in particular was worried.
Although attached also to the
friend's cb400sf, it has been used satisfactorily.
since -- I thought that attachment was possible also for various vehicle types.
View detail
The price was also moderate, and when groped for the method of attaching a Navigation, I hips-purchase-did the goods here. being related with attachment -- it is -- although -- it attaches by fixing a Nut from the flesh side of a Stainless, turning a
The price was also moderate, and when groped for the method of attaching a Navigation, I hips-purchase-did the goods here.
being related with
attachment -- it is -- although -- it attaches by fixing a Nut from the flesh side of a Stainless, turning a Hexa from on a Stainless, and screwing up a Rubber Bush.
Since it is
free Rubber Bush which does not have uneasiness since some can be shifted although interfered in a key, ETC, etc. depending on the
vehicle type and full fixity, such as some Gaps, cannot be performed, excessive expectation is a prohibited thing.
Since it is the engine performance more than
, however a price, it becomes four stars.
View detail