Reviews
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
I think that this one choice is good
Although the holder has come out in various ways, once using this series, it will not be able to be separated from reliability, robustness, durability, goodness of winning. Buy now because iPhone 6splus will replace the conventional holder, so purchase this time. I have considered other holders for the time being, but in the end there is nothing better than this. Originally it is an OEM of a minora holder, the number of links for motorcycles is increasing, the direction of installation is different, etc. It is more convenient for a motorcycle made by Daytona. IPhone 6splus has a hybrid case of spigen and it has a width of 85 mm, but it enters gruelly. There are no accidents such as jumping out so far, you can use comfortably. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
It became easy to see.
I replaced it from a thing of Cover Type.
I am afraid of rain, but it is very easy to operate.
I am afraid of falling, so it is annoying to have to stop at the Silicon band,
I am very satisfied..
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Simple and very easy to use, secure sense of Hold
I replaced it from WaterproofCase type. WaterproofCase type, as its name suggests, specializes in Waterproof protection function, but in the summer this sealed space becomes enemy, the phenomenon that the heat shuts down and the mobile itself shuts down happened, this time It became a purchase of Type.
Even though I purchased it, I chose it compared to other Manufacturers in the past, but I used something of similar shape before, it is easy to use with Simple, and it is safe to shape it securely I bought it for reason. The Silicon band gives us more peace of mind.
Actually, I used it for Touring of about 300 km, but it was firmly holded even in the state without Silicon band.
Although there is no particular Demerit, I could not throw away the sense of anxiety in the Silicon band when it deteriorated, so I also thought whether it could pursue Simple further depending on the ingenious Hold.
In terms of Cost, it seems that it is somewhat higher due to DAYTONABrand, but it may be taking balance and balance with other Manufacturer.
It is difficult to use with Waterproof, so we changed the mobile case itself to Waterproof's one.
In winter, on the contrary, I will lose the cold, so I would like to use it differently from the WaterproofCase type in summer in SimpleType winter.
I am using IPhone 6s for mobile phones that I am using.
* Can you recommend this product to friends and acquaintances? ⇒ YES! Recommendation is possible.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Simple and very easy to use, secure sense of Hold
I replaced it from WaterproofCase type. WaterproofCase type, as its name suggests, specializes in Waterproof protection function, but in the summer this sealed space becomes enemy, the phenomenon that the heat shuts down and the mobile itself shuts down happened, this time It became a purchase of Type.
Even though I purchased it, I chose it compared to other Manufacturers in the past, but I used something of similar shape before, it is easy to use with Simple, and it is safe to shape it securely I bought it for reason. The Silicon band gives us more peace of mind.
Actually, I used it for Touring of about 300 km, but it was firmly holded even in the state without Silicon band.
Although there is no particular Demerit, I could not throw away the sense of anxiety in the Silicon band when it deteriorated, so I also thought whether it could pursue Simple further depending on the ingenious Hold.
In terms of Cost, it seems that it is somewhat higher due to DAYTONABrand, but it may be taking balance and balance with other Manufacturer.
It is difficult to use with Waterproof, so we changed the mobile case itself to Waterproof's one.
In winter, on the contrary, I will lose the cold, so I would like to use it differently from the WaterproofCase type in summer in SimpleType winter.
I am using IPhone 6s for mobile phones that I am using.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Usability is very good!
◦ 【What made you decide the purchase?】 Required
Where it was Quick release type.
◦ 【How was it actually used?】 Required
I am mounting the iphone 6, but desorption to Handlebar is easy If you can clamp smartphone with One-touch, usability is very good.
◦ 【Was it difficult to install? (Hard parts case)】 Any
There is no difficulty because it only clamps to the Handlebar, but it's a little bit time to adjust with Bolt so that it's not too tight and too hard for the diameter of the Handlebar.
◦ 【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
If you clamp on the Handlebar as it is it will have a Wound, so you wrap the included Vinyl, but since it is easy to gap, you should prepare a thin Rubber sheet if possible and paste it on the Handlebar and clamp it with Double-sided Tape Recommendation. If you choose Quick Release, you should want to remove it when it is unnecessary, so if you do this you can also position the Body.
◦ [Is there anything I was disappointed about?] Required
I am not going to be disappointed, but the resin part that clamps the smartphone is cheap. Also, while the Smartphone Clamp part can rotate 360 ??degrees, one Notch is Large, so it is not possible to fine-tune the Slant a little more.
? 【Hope for Manufacturer】 - Please let me know if there are any improvement points】 Required
Even if it becomes somewhat CostUP, I think that I want you to make the texture UP. It is a Parts that always comes into sight, so it will be regrettable if there is cheapness...
◦ 【Have you compared items?】 Required
New Ing
◦ [Others] Any
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Fine adjustment made it easier to see
For touring, smartphone Navigation became a necessity item.
【good point】
- According to the Large size of the smartphone Holder up and down Quantity : Pair (for Left and Right) Depth adjustment works
- Fine adjustment of smart screen direction works
【What you want to improve】
- I want you to be able to adjust the height of both SIDE because the portion sandwiched from the side overlaps with the power switch in my smartphone and it is difficult to turn the power on / off.
(As wearing a charging power supply kept it on, worry about running out of batteries disappeared)
- I want you to adjust the HolderBody's top and bottom adjustment functions
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Instead of using a car navigation system as a smartphone
【What made you decide the purchase?】
It is possible to mount your own smartphone at the angle you want to see, and double drop prevention measures
【How was it actually used?】
It's convenient because angle can be adjusted finely, and easy to install and remove the smartphone
【Mounting was difficult?】
Instruction Manual If you go along the way you can easily install
【Please tell me the installation point and hang】
First attach the Clamp to the Handlebar, then tweak the Holder angle with Screw
[Is there anything I was disappointed about?]
Although it depends on smartphones, since the power button Button on the side of the F - 02G is hidden by Arm, it is difficult to recover when the screen goes out
(However, since the Navigation application is constantly lit, actual damage is small)
【Hope for Manufacturer - Please let me know if you have any improvement points]
Change from portrait to landscape etc etc etc. I will do it in Hexagonal Wrench, but I'd like you to make it easy to change by using springs and a butterfly Screw
【Have you compared items?】
- MINOURA Smartphone Holder
- RAM MOUNT X-Grip holder
- DAYTONA Smartphone Holder Quick Type
[Others]
In addition to Armlock there is absolutely a sense of security for fall prevention measures in the Silicon band
Even with Handlebar with many curved parts such as MT-09 TRACER, you can install the smartphone at the optimum angle by the swing Clamp
The difference with the MINOURA made by similar shape is the presence or absence of this head swing Clamp
View detail
People who are using Navigation as a smartphone are sure to come!
It is enough to fix this product to Motorcycle and use the smartphone as Navigation.
A Rubber like a string on a Right of a product introduction photo is a Point, it rotates slightly when fixing a smartphone, but if you attach a Rubber and fix a smartphone it will not move.
Depending on Motorcycle, MT-07 has vibrations when doodo doodo accelerates at 2000 to 3000 rpm, and the fixed smartphone vibrates in burst.
By the way, the used smartphone is ASUS ZenFone Selfie.
Large It is durable even for a smart smartphone..
The only thing you want to be aware of when installing is Nut's Size is 11.
And if it is Spanner it is difficult to tighten. I think that it can not be tightened with Glasses. Socket is also not allowed (However, it is possible with thin meat Socket).
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
I can not rotate without a tool.
At first I attempted to attach it to the Center, but the keyhole was
I installed it on the Clutch side because it disappears.
Exploring the place not hitting Handlebar, it is quite easy
I went for a good feeling. Just Quantity : Pair (for Left and Right) The angle can be changed
However, to rotate it requires a tool. Even this
Without it it was even better.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Touring Required Items
The trigger to purchase this product is that the previous MINOURA Smartphone Holder vibrated, the Screw part was loose, and the Body dropped out. Although it is DAYTONASmartphone Holder, I think that it is safe to build in as exclusively for Motorcycle supplies. Although we ride on YZF - R1, since the vibration is not hampered, it is impossible to understand that Screw of Smartphone Holder made by MINOURA loosens.
However, the DAYTONASmartphone Holder can withstand strong vibration. In the first place Smartphone Holder made by MINOURA thinks that it is highly recognized as a bicycle Holder, but DAYTONASmartphone Holder is also function and looks good on the appearance.
Try using Hold feeling, visibility, ease of desorption are top class even compared to other Manufacturer. The primary purpose of use is Navigation. Next time you use ActionCam with the smartphone apple.
Extremely convenient. It is a product that you can buy and be relieved.
View detail
Purchased because I wanted to attach to Front fork
Since the space between Front fork and Cowl with Meter is wide, I fixed it under the top bridge of Fork and installed it in HandlebarCenter with key lifted. The smart fixation place is also easy to see and it is totally inconspicuous when only using Clamp when not using it. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
I was happy to buy it.
South ○ I used parts CrabSeries, but I purchased this because claws touched and wobble was seen at the connection. This item requires a tool with Plus 8 mm to be attached to the installation. It is Rigid type because it is removed several times a year. Installation simple wobble none. And you can remove and install with one hand. In my smartphone I pushed the volume switch when pinched directly, so it was worn with Cover.
Speaking of the difficulty, it's a bit expensive but maybe it's cheaper if I think to use it for several years. I thought that I knew where Repair Parts was available as the parts broke.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
I can firmly fix it.
I am using it with ninja 250. You can fix it directly to Handlebar without using Mount Kit. The angle is exactly easy to see.
I used iPhones 5 and 6 with no Cover, but in any case I firmly hold it firmly without any anxiety. Just think that the attached Rubber should be used firmly.
Since the attached Rubber is not fixed to Body, there is worry about losing it
I pasted it on the back of Body with Small Sana Pipe's Tape and fixed it to Body by passing that Pipe. It became a nice feeling that there was no need to worry about easily removing it.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Smartphone Holder
I was thinking that I want Smartphone Holder and I was proceeding with my friend and purchasing it.
It is attached to the Handlebar Brace without attaching it to Handlebar.
I made it detachable because I did not want to mess around with Meter.
Although it is possible to install it with the attached Vinyl sheet, it is troublesome to overlay the Vinyl sheet one by one at the time of desorption, so I bought a suitable transparent Hose at Home center and used it.
Easy detaching of the smartphone, detaching Holder.
It feels like there is no need to worry about falling even while driving.
You can mount either vertically or horizontally Large fun convenient.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Classic
A classic in the classic among myself. Motorcycle has increased so I bought it. I heard the rumor that the Clip formula suddenly comes off, so I avoid it. The Silicon band feels as insurable and it is as good as Body. View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It was out of order - - -
I bought the same thing for another Motorcycle, I bought it with confidence because I used it for about a year and there was no problem. However, the one I bought this time suddenly ended suddenly with Rubber to prevent the dropping out of the smartphone - - -
Even if I use it for more than a year, there are products that Rubber can not cut at all, others there are products that will be installed and suddenly disappear.
Rubber, which looks fine, probably probably had scratches.
I do not know if we can exchange or refund it, and if it is possible I decided to give up and substitute 100 Hair rubber as a substitute.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
This is good in summer
In order to prevent thermal runaway of the summer smartphone, it is good to have such a type of smart head. Because it will cool down with the wind, the smartphone will never get stolen unless you leave it while you stop. It is recommended because it is firmer than price. View detail
Ram Mount X-Grip holder
It is a purchase on consent as I was checking your impressions
About 1 centimeter from the structure after mounting the smartphone Quantity : Pair (for Left and Right) I do not fall off, but I think that those who are interested after checking other products
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
This is good!
I used Case type Smartphone Holder? Case? Of Nanhai parts so far, but in the summer the smartphone overheat and because the covering Seat was reflected and it was hard to see, I was considering purchasing the OpeningAir type.
It also boosted the purchase that happened to be sold at a bargain.
Sumaho is the Waterproof Specification, if it rains it will not cause any problem if you disconnect the charge Cable. (^o^) /
Although it was a Quick release type, it was necessary to tighten Guigui with Bolt in order to install it so that it would not move, then the Quick Release became stubborn and could not be unlocked, and consequently it was difficult to fix it as a fixed type Or, it has no meaning Spec. was. (^_^;)
Others was very simple, just adjusting the angle to fit your preference or positioning.
Attachment of the Holder part can adjust the angle fairly, and so that the angle does not change arbitrarily, consideration is also taken place where it is shaped like bevel GEAR!
Parts matching the Large size of the smartphone are also included, but I think that it can be used as it is in most smartphones without replacing.
It is an impression of trying it, but this is good ~! (^o^) /
Just lock in with the Holder of both SIDE.
Safety if hooked by unexpected drop-off Silicon rubber.
Removing, when you unlock the locking and Holder open, you can remove the smartphone.
The price is about 2,000 yen at bargain sale!
Originally it is about 4,000 yen.
If you are interested in reading this impress, buy with Webike! Immediately while stock is in stock! (^m^)
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Smartphone Holder
DAYTONASmartphone Holder
I am very satisfied with just a good Size
However, iPhone can not charge with 1A output, it will decrease more and more
It is saved without being mistaken if there is notation clearly written.
It is a replacement for 2A output.
View detail