Reviews
from now on
The hold of the phone is not secure, and I feel that the lock will eventually loosen and fall off, so I use it in conjunction with a fixed band.
I would have liked to be able to change the orientation of the phone more freely.
I don't use it much, so I chose it for the price, so I hope it will last as long as possible.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Tank Bag" Interference
The orientation can only be changed horizontally.
kaedear ( KaEdia ) Motorcycle Multi Bar Clamp Bar Bracket Handlebar Phone Holder Long Bar Diameter 22mm Installation 32.0/25.4/22.0 KDR-H4-3-BLACK (Black)
When
VibrationControlDevice Seismic Spacer for Smartphone Holder3
To
If combined, it avoids interference with Tank Bag.
https://www.amazon.co.jp/gp/product/B09NR1CJ7H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
https://www.webike.net/sd/24965608/
View detail
Mounting angle
https://www.webike.net/sd/21956322/
It will be possible to orient the HolderBody at a right angle to the prop of DAYTONA's Smartphone Holder Wide for Motorcycle.
I realize that there is a slight seismic isolation effect.
The same product may be slightly less necessary for the Small TypeScooter, which requires a Mirror mount bar, as I believe it also has a bit of seismic isolation in itself.
View detail
Smartphone Holder for Motorcycle
[Points to note]
When incorporating the Adjustment Bolt into the Roll Nut, if the angle is not correct
I have a bit of a hard time with this.
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
More &hellip. than I imagined;
I was hoping that it would be an anti-vibration solution from the 1200ccLTWINEngine, and it must be effective because it was sold out for a while at Motorcycle supply stores. When I actually used it, I felt that the rubber hardness was too soft. I think it would be better to reduce the amount of deformation of the rubber a little more. View detail
The plastic parts are cheap and the anti-gap sponges seem to peel off quickly.
[How is it used?
It is attached to the Handlebar of MT-10SP and mounts a smartphone as Navigation for Touring.
Was the one you received as per Image?
It is cheap and I have concerns about its strength.
Was the installation difficult?
The MT-10SP uses a taper handlebar, so mounting it on the handlebar is quite limited in terms of space.
RubberSpacer was needed.
How was your experience with it?
good point
This is where the flexibility of mounting and angles is tremendous.
A bad point
As mentioned in the Title, the 3-prong plastic parts that hold the phone in place are cheap and will likely crack in time.
Also, the anti-gap Sponge is going to come off soon.
[Was there anything that disappointed you?
Texture.
Points, hangs, and cautions for installation
Be sure to check that the φ of the Handlebar fits.
Worst case scenario, it may not be installed.
[ITEMS TO BUY TOGETHER
This is essential to protect the recent expensive smartphone Camera from vibration.
Seismic Spacer for DAYTONA's VibrationControlDevice Smartphone Holder3
Item number:23943
[Opinions and requests to Manufacturer
Strengthen the three claw parts that hold the phone to increase rigidity.
Also, please do away with Gap-proof Sponge and use a sturdier Material such as Silicon.
View detail
Price suitable
[How is it used?
It was installed from when I bought XJR400R.
I don't like the Smartphone Holder around the Handlebar, so I used it a few times and removed it.
Was the one you received as per Image?
I think it is exactly as pictured.
How was your experience with it?
The comfort of the product is commensurate with the price. I didn't think it was particularly easy to use, but it was sufficient for my needs.
I was concerned about Hold strength.
[Points to note]
None in particular
How did it compare to other products?
I had another Smartphone Holder, but there is a price difference, but, honestly, that one was easier to use.
If it is a low Engine Displacement Volume system such as Scooter, I don't think there is any concern about falling because Speed is not produced.
View detail
A must for RAM Mount installation
The quality seems to be not so good since BALI is still present on the ball portion, but the installation itself was not a problem.
I have it mounted on a ZETA Handlebar and there is no wobble at all.
View detail
I bought it to try it out.
I bought it to see what it was like.
I think it had what I needed, I don't remember if Screw lock was included.
Installation is easy and can be done quickly by referring to the Instruction Manual.
I think I have driven about 4000 km using it. At first, I was uncomfortable with the higher position of the phone, it is higher for the thickness of the Rubber part.
The softness makes it difficult to adjust the positioning of the phone. It is also difficult to detach and attach the cell phone. Well, it is a matter of getting used to it.
While driving, you can see that the vibration is mitigated. That said, the screen is not difficult to see.
It is difficult to operate the screen while the Holder is attached. Once you get used to it, it is no problem.
I think the protection of the mobile Camera is working.
It would have been nice if the rubber was a little stiffer. Also, it would have been nice if it could be kept within the length of the Parts before installation.
View detail
Is there a mistake?
I couldn't believe my eyes at the difference between the statement and the merchandise.
What's his mistake?" I feel a little lost.
View detail
Like insurance?
[How is it used? Touring only.
Was the one you received as per Image? Yes.
How was your experience with it? I didn't really see the effect.
[Points to note] The Rubber Band, which prevents the phone from falling out, is relocated to the Smartphone HolderBody.
How did it compare to other products? This is the only one that fits as it is an Option product.
Other items that would be helpful
Points and hangs for installation/Items to be purchased together/Opinions and requests to the manufacturer Installation bolts can be omitted since the original parts can be used, and the price should be reduced accordingly.
View detail
Fits: その他 , HONDA 400X, HONDA CB500X, HONDA CB500X
Conversion Clamp
I purchased this product to convert the diameter of the Smartphone Holder so that it can be mounted and clamped.
Quantity:Quantity from 1pc.:1 Set of 2pcs. was less expensive, so Quantity:2pc. I bought the set of white DAYTONA letters because of the black color. But you can't see it when it is installed.
When attaching the Smartphone Holder, we used a little bit of force to widen the split in the material, which is like a hard rubber, and then combined it with the Clamp Diameter Adjustment Bolt of the Smartphone Holder itself and the included ClampSeat, it became possible to attach the bracket portion.
It seems to clamp quite well and the fixation seems to be Large sturdy.
View detail
Easy to use
Just the right Size for an eye fan.
The Touch panel can be used while the case is still in the case.
Cushioning properties are good, so the phone is not easily scratched and is very durable and waterproof.
View detail
rotation prevention
This is installed here because of the thickness and the lack of pressure when fixing the clamp. It is just a Seat, SizeSmall, but unfortunately the price is not so high. View detail
![[Repair Parts] Smartphone Holder for Bike Wide Hexagon Socket Flat Head Bolt](https://global.webike-cdn.net/photo/impression/e3/e3b0f8b8c68d05dd386d4f4f57b7930bL.jpg)
Single Item
It is helpful because it is sold as a Single Item, but the price is a little high as a Screw. View detail
Spare
This is a purchase for Repair.
It would be helpful to be able to purchase only this part since it is sold as a Single Item.
View detail
No angle adjustment is missed.
I have two Motorcycles, so I decided to use the Quick clamp. I changed my cell phone model and my Smartphone became too large to fit in the existing Smartphone Holder, so I bought this new product. I bought this product because I changed my cell phone and my Smartphone is too large to fit in my old Smartphone Holder. There are many inexpensive Smartphone Holders, but the ones with plastic base will crack over time while driving. I didn't want to have to drop my phone due to cracking, so I chose a holder that is not plastic at the base and is made of gold and is strong and durable. The installation is inevitably on the side. However, the angle cannot be adjusted when a Smartphone is mounted on the horizontal type due to its structure. The latest Smartphone has a very beautiful screen with GlassFilm, so it reflects light, which is a minus point. The angle is not adjustable, so even if sunlight reflects off the screen of the Smartphone, the angle cannot be changed, making it difficult to see the Smartphone Navigation. The Clamp is also difficult to install, and the Smartphone is not as smooth to put on and take off as I would like. View detail
keeping one's mouth shut
As others have written, it increases the height and overhang. So I disassembled it and re-tailored it to be more compact. I removed the visible screws and bolts, cut the position of the cover, and changed the angle of the inside GelParts. The GelParts inside were also changed in angle. I am responsible for this.
I would like to verify the anti-seismic performance in the upcoming 300 km Touring.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Repeat for the second unit
If you have a small phone, you can install it Firmly.
In Xperia, there was a phenomenon that the power button was pressed.
It also comes with a band to help prevent it from falling.
In fact, with the second Repeat, the place where the phone is held became hard and the release button was also hard and difficult to use. There are a lot of new smartphone holders out there now, so I plan to replace it when it breaks. I decided to use the →RAM Mount.
It's a Quick Type, so it's great for two devices.
Recommended
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
I installed it for navigation on my phone while touring.
I installed this on my 2019 YZF-R25.
I've mounted it on a bar for mounting my phone, and I've been able to use it comfortably without any shaking while driving. It can be fixed quite firmly, so there is no chance of the phone falling off and flying away when you fall.
As a personal point of concern, it is easy to detach and attach with the One-touch, but as I used it, the gold part to release the fixation became stuck, and I had to put a lot of force to detach it.
In addition, perhaps due to long-term exposure to UV rays, the Bracket that holds the top and bottom of the phone in place broke after about a year of use.
It's not a bad product in terms of texture and feel, but I felt that the durability was a bit inferior to the higher-end models from Ram Mount, etc.
View detail