Reviews
Just attach it to the phone cover.
Quantity to Holder:Set is 90-degrees rotation, so the phone is in portrait and the Quantity:Set or beside Quantity:Set or not Set is determined by this orientation.
I can change it on the Holder side with Hexagonal Wrench.
I use it every time I go touring and have no problems.
Large Variety Satisfaction
View detail
For those who don't want to stand out with SimpleStyle
There are many different Smartphone Holders, but I think this product is the most discreet and easy to install.
In fact, it is so close to the Top Bridge that its presence can be eliminated.
If you want visibility, you can choose a Type to attach to the Handlebar.
Installation on the Holder is simply a 90-degrees rotation to fit the groove.
It will not loosen or fall off.
Satisfactory product
View detail
SP connect Anti-vibrationModule
I use an iPhone 12 and bought the anti-vibration because my Camera broke. It's been installed for about a week so it's not accurate yet,
I don't know, but for now Camera is usable.
It says it reduces vibration by 60%, but I don't know how much this is.
View detail
Simple and beautiful.
Simple and beautiful.
The finish is good and it blends in like OEM.
It is easy to install and remove the phone, yet there is no gapping or falling off. I think it is a well-made product.
I have been using it for Navigation with iPhoneSE2 for about 3 years. No particular negative effects on the phone.
I have heard that some models with a high-performance Camera may break due to SR vibration, so I haven't tried that one yet.
The price is not cheap, so the cost performance is not so bad.
View detail
SP CONNECT SPCO NECTO Smartphone Holder MotoMountPRO
I replaced my DAYTONA Smartphone Holder because the lock had become too tight. I think the texture, installation operability, and design when not wearing the phone are also good. View detail
SP CONNECT SP CO NECTO Option items Anti-vibration ray
I have considered many different products, but I think this is a very good product in terms of texture and the firmness of the VibrationRubber and the way it shakes. So far, my phone hasn't broken and I feel protected wearing it. View detail
safe before you fall
I bought this as a precautionary measure when mounting my iPhone13mini on my smartphone, as I didn't want to risk Camera failure due to vibration.
They say it reduces vibration by a whopping 60%, unless the Camera breaks down. It works!" I think it is a feeling that I keep thinking about.
It is reassuring to know that it is not going to fall down, but I can't really feel how effective it is.
The only complaint is that it looks larger than expected.
I was using SP CONNECTO because I prefer the inconspicuous look of the phone when it is not mounted, but it has become much more assertive.
Since Coloring is all black, I managed to keep the assertion to a minimum, but I honestly wish I could have maintained a bit more Stylishness.
But I can't turn my back on the idea of breaking the Camera on my phone.
View detail
How effective is the vibration isolation?
I used to use Quad locks for a long time,
The reason for the purchase at that time was also the anti-vibration measures.
I replaced it with SP CONECTO two years ago at the same time I bought Motorcycle.
My motive for purchasing the car was that it was being handled by DAYTONA, so I thought it would be safe.
In this case, it is installed in combination with romMount.
The reason was that the Handlebar area was too tight, so we went with Flexible,
It was because the Position seemed to be decisive.
So far, the SMA Camera has been in use without breaking down.
I think the price is high if you get a lot of things together, but the texture is there,
I use it as insurance because it is somewhat reassuring.
View detail
Overall, I feel like I'm almost there.
I have been using SP CONECTO for about 2 months now.
I wanted to attach it to the Stem for a Simple look, so that made me a little dissatisfied with the usability.
SP CONNECT:SP CONNECTO:MOTO STEM MOUNT (MotoStem Mount)
I am putting it on the imprementation of the Meter, but when I put my phone on the Center, I can't see the Meter.
So by mounting it on the Right side, visibility of the Meter and phone is not a problem! 。 ...So far, so impre...
I have noticed that when I look at my phone on a sunny day, I often can't see it at all because the sunlight reflects off my phone.
Because the phone is mounted on the Right Side rather than the Center, the screen is almost horizontal (the vertical front cannot be raised), so I think there are extra reflections.
Therefore, we placed a Rubber Bush across the front of the angle adjustment portion of the Stem Mount so that it is slightly tilted in the vertical position of the phone.
This is a little better.
Well, I don't use it when I'm running, so I guess I can just stop and touch my phone slowly.
Not to complain, but the length from the Stem to the phone mounting can be adjusted, and the front and rear Quantity:Pair (for Left and Right) I think it would be more visible if it could be tilted to the left or right.
View detail
Properly installed.
Product Name
SP CONNECT SP CONNECT SPCO NECTO Universal Interface
Item Number
34216
Vehicles
MT-09 (2021)
Number of man-hours
About 10 minutes
Required Tools
Scissors, Rubber Band
Why did you choose this product?
The Motorcycle I bought had a SP CONNECT ESPECO NECTO Mount on it, so I thought about replacing the entire new phone mount, but I wanted to get it cheaper, so I went with this one. I also didn't need the phone Cover I have now, so it was just as well.
Was the one you received as per Image?
It was just as shown in the Image, and the Instruction Manual was also included.
Was the installation difficult?
Large sturdy if the mounting position is not mistaken.
How was your experience with it?
I am glad that it was able to be installed securely and still withstand the vibrations of the motorcycle.
[Included Parts:were they on?
Removal Tools and Installation Replacement Parts and Instruction Manual
[Was there anything that disappointed you?
The product could have been cheaper.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The product was of satisfactory quality.
Fixed to the AttachmentBracket and mounted on REBEL250.
There is no vibration that makes it difficult to see the screen when driving around town, and it is very comfortable to use.
I haven't tried it at high speeds yet, but I'm mainly a city rider, so no inconvenience.
The product is also compact and can be used with as little disruption to its appearance as possible.
The product was made by DAYTONA, and although it was a bit pricey, I was satisfied with the product as the price was right.
View detail
Simple
I wanted to put it in an inconspicuous place, so I chose the Stem Mount.
Anti-vibrationModule and Universal Interface were also purchased, so the price was just under 17,000 yen, which is very expensive for a Smartphone Holder.
Well, I guess I'll just have to focus on design...
Fits in diameters from 15mm and up.
I put it on Center for now.
But
If you attach the phone vertically in this condition, you can hardly see the Meter.
The phone is an old Android model AQUOS sense3 plus
I shifted it to the Right side.
Now the Meter is visible. Now we will run it and check it.
I've only been running for a little while, and it's not something I want to watch while running, so I hope I won't be inconvenienced.
View detail
Insurance before it breaks down
To be honest, I can't tell how effective it is, but I'm ready to give up if it breaks with this. View detail
Nice but expensive
Looks upscale, but the price is high. View detail
Simple mobile phone holder
I bought the German SP CONNECT [SP Connect] MOTO MOUNT PRO mobile phone holder on Webike. The workmanship details and the use feel are good. It uses the Sp connect proprietary shock absorption system to protect the mobile phone from being damaged by shock. It is easy to install and disassemble. It's all very convenient. This shopping experience is very pleasant, thank you customer service for your careful answer and help. -------------------------------------------------- -------- I bought the German SP Connect [SP Connect] Moto Mount Pro mobile phone bracket on Webike. The workmanship details and the feel are good. It is very convenient. This shopping experience is very happy, thank you customer service for your careful answers and help. Powered by Google Translator View detail
Smartphone Holder that looks SMART
Purchased to attach Smartphone to Motorcycle.
Apart from this, a UniversalSmartphone Case from SP CONECTO is used.
Removing and attaching the Smartphone is fairly easy and only requires a 90° turn. It is the fastest way to attach and detach a Smartphone.
There are similar products, but Advantage is the Large size in terms of quality and ease of removal and attachment with one hand.
It can be detached by simply rotating it, but there is no locking mechanism such as a turnstile, so some people may be concerned about it falling off. However, the
If it is firmly secured, it is unlikely to fall.
View detail
go on SMART
Installed on a yzf-r1 2022. The smallest Adapter that comes with it will fit. It is a little bit expensive but it looks SMART and is a good product. View detail
First Motorcycle mount
This is my first time purchasing a mount for a motorcycle, so I have nothing to compare it with, but I used it for about 400 km on a highway touring trip the other day and it did not shake or come off in any way. I used the Motorcycle Mount for about 400km on a high speed touring trip the other day and it did not shake or come off.
I have also gapped the handlebar at an angle, so I would recommend a straight line.
The cost may be higher than other mounts, but Merit has a wide variety of parts, so I think Merit can be applied to other applications.
Two disappointments.
? The fact that the protective Seat of the phone has Gapped. Probably, if it was bent even a little from the Fit feeling to the phone, it was pushed by Cover and became Gap.
I would like to attach a Strap in case it comes off from the mount, but it is a pity that there is no hole.
The external Strap is worn.
View detail
Plating is beautiful
It holds them in place tightly.
The plating is beautiful and Large sturdy even after several years of use.
View detail
Can be attached to SMART
I bought it because I really wanted to mount it on a Stem hole.
Another good point is that a total of six different Adapters are included to accommodate various Stem holes with different diameters.
The angle at which the phone is mounted can be selected in steps, and when the desired angle is reached, the bolt can be tightened to secure the phone firmly in the stem hole.
The texture and appearance are very good for the price there.
I think it is also very durable in environments where it is often exposed to rain and wind.
The only thing that would have been better would have been a cap to cover the Bolt hole.
If you want something good, even if it's a little pricey, this is the recommendation for you!
View detail