Reviews
Used in Scooter race
Installed on a 4-stroke JOG.
After confirming that the Sensor responds to the magnet, it is brought into the Course, 10 cm above the mounting ground, and there is no response in Tokushima CartLand.
Next time I will ask CourseOwner if there is a magnetic bar and then try to adjust the Sensor position etc.
View detail
magnetism
By Circuit
The magnetic strength that can be picked up seems to vary
If there are times when you don't pick it up at all and don't even Start.
Start, but by the time you've done three rounds, you've done three rounds.
You can also try to display a wrap.
Circuit is able to measure and display every lap without any problem.
The fact that it is there means that as long as it can pick up magnetism, it should be fine.
I think it depends on the Setting of the user.
View detail
Enough for an introduction
Motive for purchasing
I bought it to check the time while driving in the Circuit At first, it was good enough for me to know the time, so I used Cue Stars and Dig High technologyLap timers of GPType S, such as spice, have a high The cheapest magnetic type is the LeverLight Lap I decided to try the timer
About the product
The numbers are large and the visibility is good
The information displayed is only the time of the lap, so you can't compare it with other laps while driving Even so, the numbers are still large enough to be visible while driving I think that this is an excellent costumer for those who only need to know the lap time anyway
Connect to the Battery and you don't need batteries
Lap timerBody starts with the Button battery, but it connects to the attached Battery You can use the Wiring function without the Button battery There is a switch to turn on/off the power, but be careful not to leave it on and leave the battery on Let's
Limited to Circuit with embedded porcelain bars
The included magnetic sensor detects and wraps the magnetic bars embedded in the Circuit Unlike GPS, the accuracy is measured by magnetic transit timing, so the accuracy is relatively high (Depending on the position of the Sensor, it may pick up Noise.) But, on the other hand, you can't measure a lap without a porcelain bar, so I'm going to have to get the Circuit running well before I buy it You need to make sure that the porcelain bars are embedded
It's a bit of a hassle to install
The key is the magnetic sensor, but if you are not careful about the position of the magnetic sensor, it will not detect magnetism and will not be able to correctly wrap the lap It cannot be measured Also [Contents] does not even come with a bracket to attach the Sensor to the vehicle by yourself You need to prepare a Bracket to match, and the Lap timerBody is also fine Large size, Quantity:I'm also very careful about the position to set
View detail
It is Exactly for introducing Circuit.
? Circuit It was vaguely running at the running meeting, but wearing Time a Tucker knows the concrete time gradually but it is connected to TimeUp.
? There is no problem if the person who can make the plastic can install it. However, in the enclosed Velcro it is insufficient in quantity to purchase separately in 100. Bracket attached to Sensor is also purchased at 100 Yen, processed into L-Type, fixed to Under Cowl with Velcro and Gum Tape. Meter also fixed in Screen with Velcro and Bracket. There is no problem for now.
? During Touring Sensoretc. In Space in Cowling.
? The difficulty is that when Meter gets hot, the liquid crystal turns black and characters can not be read.
? I am glad that it is a little lower price.
View detail
![ZiiX Lap Timer Body [for Repair]](https://img.webike-cdn.net/catalogue/18451/zii_lap_timer_TS.jpg)
One device for installation
How to use is very easy, the visibility of Display is no problem.
One method is necessary to install the magnetic sensor. Because it is a Universal Product, we have to select a mounting position well and purchase Bracket separately. Also, depending on the circuit, it may be difficult to sense magnetism, so it is better to approach the ground as much as possible.
I pasted Display with Magic tape on the Bracket of the included Bracket and Pipe Handlebar.
Since the attached battery was quickly cleared, we recommend that you purchase spares without relying on it.
View detail