Reviews
(degree of) satisfaction
Used in Circuit.
It is good to see the Best lap updates in Lamp.
View detail
A must for post-Sports driving analysis
[How is it used?
Used for sports driving in mini circuits
Was the one you received as per Image?
The Logger and GPS Antennas were as expected and easy to install on the car body.
How was your experience with it?
The positioning system is high, and the accompanying analysis PCSoft is well done.
If used well, various driving analyses are possible, which helped us to identify driving issues.
[Points to note]
GPSAntennas are exposed to the outside so as not to break in the event of a fall,
How did it compare to other products?
Improved positioning system compared to conventional products.
[Others]
DashWare can also be used to combine the log display with driving videos.
View detail
Indicator is good
The Lap time in the Circuit run is determined by the Indicator.
It would be useful to have more clarity due to its existence.
I'm not sure if the laps I just ran were good or bad, but I have a sense of what I'm talking about.
I can judge by the light without, so I can adjust how I run the next lap.
It is useful for
We replaced P-LA● for the above reasons.
It is not easy to improve just by running somehow.
Difficult, unnecessary falls, etc. by using good ITEMS,
I think we can reduce Risk.
View detail
No problem, it worked!
It worked fine at Twin link Motegi! View detail
Measurement accuracy is high.
I was using Dig spice3 and replaced it with Dig spice4.
Used in HRC GROM Mini bikeCircuit.
The measurement accuracy is higher than that of 3, so measurement errors are less likely to occur.
Size is almost the same as 3, so there is no discomfort.
It is a wonderful performance with increased accuracy.
The price is high, but it is more than worth it.
View detail
It's still better to have it.
The one I used to use before was submerged in water, so I…d better have it so I can see how many seconds I'm lapsing, which will motivate me to keep going. View detail
It is encouraging.
after all is said and done "I know my current situation, my status on the day, and my Levels." That's a good idea!
No pressure ≒ fall Risk reduction ⇒ long and enjoyable". That would be the case.
I am not aiming for Time in the dark, but it is nice to know the Level as a concrete number.
Especially AttackIndicator is a sectional Best; Green Light 、 Less than that; Red. It is very encouraging because it is displayed each time at the
I am not good at working, so I asked Shop to do the installation.
The power supply is taken from Battery, but the Instruction Manual for handling "Battery may rise and should be disconnected when not in use." and it is necessary to disconnect the Body's connecting wires (3 wires) except when driving. (This is not a hassle and I don't feel it is a minus point). (This is not a hassle and I do not feel it is a minus point.
Another thing to keep in mind is that 'Protect them from the sun when they are at rest.' This means.
It is not a problem in light sunlight, but if the TimeaTuckerBody is exposed to strong sunlight and heats up too much, the LCD Panel will not display. This has been confirmed by contacting the Manufacturer. Therefore, I cover the body with a Towel during intervals in the Circuit on days with strong sunlight.
I am very satisfied with the performance of the product and highly recommend it!
What's strange about the Circuit run is that Sometimes you get your best time when you think you're playing along." I guess that's what you mean! LOL.
View detail
I can recommend it.
I think it's a good product
This kind of lap timer is essential for those who run Circuit.
Cost performance is the best.
We are using it at Tsukuba Circuit without any problems.
I used to use LAP SH**T, but it had reached the end of its life, so I replaced it. In terms of appearance, I feel that this product is somewhat more robust, with thicker sensor wires, etc.
I was concerned that the angle dependence of the LCD contrast is large, making it difficult to check the time while driving, depending on the angle at which it is mounted. If the dial is angled too far away from the front, the letters will become faded.
View detail
Motivating Lap timer
I use it on my RSV4 RF mainly for Tsukuba Circuit.
In addition to the usual magnetic lap timer function, the AttackIndicator, which is the best feature of this Time a Tucker, is very good.
The AttackIndicator is a Lamp of Red and Green, and by installing it around the Meter, when the section time exceeds the section time in the lap up to now, Green blinks, and when it falls below, Red blinks, and you can see instantly whether your pace is good or bad while riding. It is a function to know whether your pace is good or bad.
Because I know the goodness and badness of the section time without having to look at Lap time every time, if Green blinks, it is the translation that has come in Best lap, so I get more motivated.
My RF has been replaced with an I2M for RaceDashboard, which has a very good GPS Lap Timer feature, so I don't need the magnetic Lap timer, but I wanted to continue to use the AttackIndicator feature, and the Time a TuckerBody is no longer needed. I don't need to see Lap time anymore, so I continue to use it under the I2MDASH, and the AttackIndicator is mounted in an easy to see place above the DASH.
Here's a video of me driving the car so you can see how it works.
Watch the AttackIndicator Lamp flash on your Dashboard.
In the case of my RF, I put a bracket on the back of the oil cooler and tighten it to the appropriate bolt and hang it down to Under CowlLimit. There is no measurement error in this position. 。 If you install it around the rear swing arm pivot, it may pick up the magnetism generated by the rotation of the steel belt of the rear wheel, or it may fail in measurement.
View detail
Care must be taken at the site where the magnetic sensor is installed
There is almost no error from GPSData logger and visibility is high, and Barge and performance are satisfied with respect to Body and performance.
Body installation Included Parts : Without using Bracket, we processed the T-shaped trunk number of about 100 yen at home center, shared it with Meter fixed Bolt and fixed it with face Tape so it is super easy.
However, it seems that installation of the sensor to the SSMotorcycle requires one device. At Home center I found a Bracket that conforms to the shape of Under Cowl and I thought that the code also brought me to Meter along the Side stands sensor code, but when I tried running, the Sensor was pretty much in Left turning I was scraped.. Still it works, but Right Side is close to the lunch box catalyzer, and if you can scrape the Sensor any further, it might be bad if you need to cut Cowl somewhat?
View detail
Good visibility
I used it to confirm the Lap time in Circuit.
I liked it because the Compact installation was easy and the visibility was good.
Especially because we can confirm the overall best update with Green and Red Lamp
You can concentrate on running without having to look firmly.
Battery built-in so you do not need Wiring is good.
For Replacement Battery also released is Point high!
Unfortunately we lost HomeCourse's magnetic bar so I could not use it
I think that it is better to go to the available Course.
View detail
Satisfied with Cospa
There are times when it does not respond occasionally when passing through magnetism while banking, but this price is not complicated.
It rarely happens not to pick up magnetism.
At first I thought that the screen looked as big as Design, but as long as I'm running this is just right.
One disappointing point is that Film was not found on the screen and scratched, despite being a brand new.
Well, I thought that I wanted to use it immediately, if I used it, I thought that it would scarred anyway and I used it as it was...
View detail
Easy to use with simple operation.
Measuring laps, looking at past laps, etc. is easy and it will be readily available without having to look through Instruction Manual many times. I think that installation is not so difficult, but since it is perfect Universal Product, trial and error is necessary to install TimerBody and Sensor. If TimerBody is not installed in a place with sufficiently good visibility, it will lead to loss time due to difficulty in viewing.
View detail
Yoshi Yoshi
Since it was used in R6, I attached it referring to the item description. Results could be used without problems. Is the problem a distance adjustment from the ground?. I used it by pasting it on the Oil pan of Full cowl first, and I was able to use it. It was cheap but it was very good.
View detail
I am in good health. (CBR-1000rr sc57)
I am mainly enjoying the Suzuka Circuit Sports run.
The Green Light of AttackIndicator is easy to see, but the LED of Red is bad visibility a little? It may be a problem of angle
View detail
It is easy to use
Buy 1 or 2 times a month so purchase. Battery supply and
There are two ways to supply 12V is saved. Large It is easy to judge Time instantly with a good figure. Sensor position is also within 20 cm from the ground so you get enough bank angle.
View detail
Cospa is better than other Lap timer
I am not good at kind of machine, I can not pull the power supply etc, so I am happy to move with the rechargeable battery. Moreover, even if only Vinyl Tape is installed it will perform its full function. I am using Tomin, but there is no problem with magnetic reading. When connecting to a PC at home, you can immediately drop the record with CSVFile and edit it as Excel.
I refer to other people 's impressions, but as expected, compared to other things, Cost, I think that this is beneficial considering the function.
View detail
You can use it enough
It was enough for Circuit several times a year. Batteries are also cheap and I attach the base to Cowl of Ninja 250 R, the lightest, and attach them together. With a feeling of hanging.
The sensitivity of the sensor is also not bad.
View detail
It is used for FZ1.It is a conclusive factor that they are [ which has many people who are using it in the Circuit ] somewhat cheaper than the same product of the other company.Although the parts shop of neighborhood can also be purchased, since r
It is used for FZ1.It is a conclusive factor that they are [ which has many people who are using it in the
Circuit ] somewhat cheaper than the same product of the other company.Although the parts shop of
neighborhood can also be purchased, since reliable webike& dispatch is YAMATO TRANSPORT, it purchases at this Site.The
instruction manual is polite, and since it is intelligible, attachment is easy (we amateur).Although it is necessary to prepare independently the Stay which attaches the
Sensor, the cheap thing which can be obtained easily in a Home center etc. is enough.Since the Stay in which the stock was left was used for suitable die length this time
, having cut it, otherwise, expenses are nothing.
operation and setting out can also be easily performed according to an instruction manual.Although
Tsukuba and Okegawa were run, it operated satisfactorily.It is large satisfactory !! also to the point which can carry out data storage since it can output to the
Excel.
View detail
[Webike Monitor] It purchased, after I was allowed to try that with which the friend's Motorcycle was equipped on the Sports run begun recently [ ]. display part is large and can fully check also in a run. I think that this hit is the produ
[Webike Monitor] It purchased, after I was allowed to try that with which the friend's Motorcycle was equipped on the Sports run begun recently [
].
display part is large and can fully check also in a run.
I think that this hit is the product which considers a user's thing well and is made.
At
run meeting, there may not be Mr. Helper who asks you for time measurement, and it may overlook a pit sign.
I think that considering such a thing this product that carries out an automatic meter reading and can display a weekly Lap time certainly is very convenient.
View detail