Reviews
Installation
I purchased this as an Antenna Bracket for ETC.
At first, it seemed difficult to adjust the angle, but I tightened (the Screw that connects the top and bottom) to some extent,
It is easy to fine-tune and tighten.
Double-sided tape is also included, so no worries.
I put it on my NSER250R SE MC28, but I was not sure where to put it, and in the end I fixed it at the center above where the card key is inserted, where the cables are not damaged (with double-sided tape).
I purchased Silver and it is attached without any discomfort.
View detail
Easy installation
Even a beginner could easily install it with just a few tools. View detail
ETC Antenna Bracket
I was having trouble installing ETCAntennas on top of the light and around the handlebar, but this bracket seems to have helped me get them into a good position. View detail
For installation of Handy radio Antennas and Bluetooth equipment
[How is it used?
For installation of Handy radio Antennas and Bluetooth connectors
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to install as it is only co-tightened with Mirror
[Points to note]
None
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
There is a sense of quality
It is solidly made and looks luxurious.
Strong double-sided tape is included to securely attach ETCAntennas.
The free angle of adjustment allows for easy positioning of the Antennas.
It is also highly Point because you can choose your favorite color from three different colors.
View detail
Is good
It is installed with DAYTONA's Bracket for Mirror Holder.
It is carefully made and has a high quality feel.
The angle can be freely adjusted and firmly fixed with the included double-sided tape.
View detail
Is good
ETCAntennas can be securely fastened by installing it together with DAYTONA's AntennasBody Bracket.
It is installed together with Mirror by co-tightening, so it does not get in the way.
The location of Antennas is determined by the Best position.
View detail
Well-fixed
ETCAntennas can be adjusted to any angle and securely fastened for installation.
I think the price is a little high, but it is well made and has a luxurious feel to it.
View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
I've been looking all over and this is the one I like best!
During the installation of Antennas, which is required for ETC installation, the
I was looking for a good Bracket for my car because I couldn't install it directly on the body of the car.
There is a short Bracket from the Antennas mounting and the angle is Quantity:Pair (for Left and Right) The number of adjustments can be made to the
This Bracket can also be bent with force to get the angle you like.
Tie Wrap to stop Wiring (inHemp palmuck) and
It also comes with something to protect the Wiring from Antennas through under the Tank to under the Seat.
It is a well thought-out product.
View detail
This is good!
I was struggling with the location of the Antennas on the ETC and the shape of the Bracket, the Cowl and Left SideSwitch controls, and the strength, all solved! I think it is reliable OK. View detail
The goods are good.
Ordered on 10/3 with Partner warehouse in stock on the listing page, arrived on 11/3 with delayed delivery. It was a different color. This happens sometimes. View detail
It's not intended for...
What made you decide to buy?
In order to install the DriveRecorder-FrontCamera neatly without drilling holes in the OEM Cowletc.
How was your experience with it?
After installing the DriveRecorder, I did a test drive and checked the recorded video. The FrontCamera position was perfect and the video was beautiful without any part of the vehicle being visible.
What is the point or hang of the installation?
Before the purchase of DriveRecorder, I was troubled considerably about the FrontCamera installation place. On installing "Do not drill holes in the OEMCowl. "It must be smooth to remove. "The Camera code should not be overloaded. The DAYTONA satisfies all three conditions. "ETCAntenna BracketforAmerican. The size of ETCAntenna Bracket is perfect for the size of CameraMount, so I decided to install it on the bottom side of the Light Cover using ETCAntenna Bracket. "ETCAntenna BracketforAmerican. And I was right.
View detail
As a Bracket for Super slimStyle RPM Meter.
I don't use it as an ETC Bracket, I use it as a Bracket for additional Meter as the title says.
The diameter of the Bolt is the same as the diameter of the Handlebar Switch, so it's ideal for use with a Digital Tachometer.
However, the Material:Please note that it is aluminum and will break easily if you bend it too much.
Here is a video of the FZr1000 going through an ETC Lane.
View detail
We're back in business
We've been able to get you in the OEM position successfully
Thanks to you, I'm doing well
Most importantly, you responded quickly
I was able to bring in Smooth
Thank you
View detail
It's thick, so it's strong and won't break
We bought it in 2015 and have been using it in a flaxen environment until now, so it's corroded through the holes The thickness of the material is thick and durable enough to hold up well to vibration View detail
Diversion as MultiBracket
We still need to get a handle on the rainy weather, but one smartphone app that I wanted to use the NavigationREMOTE CONTROLLER and easy to remove and I was looking for something that could be installed, and when I heard about this product, I decided to purchase it
It's possible to use the Magicron Spec. without modification, but I'm not sure if it's possible to change the batteries or not They're sold at the home center to create more effective joints to prevent them from falling due to vibration AluminumAngle is used to fix the style to this product I took it
The Mirror bracket on the Lever is also used to attach to the Bracket By fixing it, the REMOTE CONTROLLER can be used with one hand became
Basically, it's used for stopping at intersections, but unlike the gloves, it's not used for pushing It's a great way to relieve the frustration caused by
View detail
Stylish
The Mirror co-tightening bracket that was put on without permission at a Motorcycle supply store is lame I replaced it with this one because it became difficult to do maintenance on Lever
I can place Antennas where they won't get in the way and they look nice and uncomfortable
View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
Any location
Purchased to change the location of the ETC Antennas
Use the screw holes on the Meter Bracket instead of Mirror on the Handlebar This is installed inside the Fly Screen by the user
It is easy to install in places where it can be screwed together
View detail
It is good
Mistuba's MSC-BE 700 E (ETC2) We used Antennas and Indicator to attach to the Left Side of Handlebar.
Usability was very good with the Large size just feeling good.
But the price is expensive.
View detail
Refreshing around Handlebar
Until now, I was wearing an ETC receiver with my own Stay, but other switches and so on also increased, and the surroundings of Handlebar got stupid. Refreshed by using this product. View detail