Reviews
Neither good nor bad
The Rain Cover does not have much to say about it, but I think it accomplishes its purpose of protecting the user from the rain.
It can't be helped, but it feels difficult to operate Touch when it is attached.
It is too hard to keep it on everyday, so it is for rain only, but when it rains while driving, I have to stop the Motorcycle and put it on.
I wish it had a waterproof cover for daily use.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
I like it very much
I like the texture and the thickness of the back of the camera, so the Lens part of the Camera does not stick out and the back is flat, making it easy to place on a table or something.
And the overall thickness made it easier to grip.
View detail
Fits: Others iPhone 12 mini, Others iPhone 13 mini
Model-specific products are good!
SP Conecto itself has been in use for some time, but there were no model-specific products because the phone was made by Xiaomi.
So I used UniversalInterface on a commercial Smartphone Case.
I was still not particularly dissatisfied with it, but since I started using an iPhone, I decided to use a dedicated Case anyway, so I decided to purchase one.
As expected of a dedicated product, the fitting is excellent, and as a smartphone case for everyday use, the protection performance and texture are unquestionable.
The SIDEButton is a little difficult to press, but I think it is acceptable.
Wireless charging is also very convenient because it can be used without modification.
The price may seem a little high when looking at the Smartphone Case, but I think it is reasonable when you consider the total convenience.
It also makes me always try to keep my hands beautiful, because if I touch them with greasy hands, they leave a solid mark.
View detail
Fits: Others iPhone 12 ProMax, Others iPhone 13 ProMax
It's a little flatter and doesn't rattle around on my desk anymore.
[How is it used?
I was using a Smartphone Case that is not SPC compliant,
We replaced it with an SPC-compliant Case when we bought a new vehicle.
I use my phone Navigation when Touring, Mainly to listen to music.
Was the one you received as per Image?
The phone is the same but Case was using the old MODEL,
As for Image, it's just a little flattened ….
How was your experience with it?
Fit feeling is good because it is dedicated to each phone model.
[Points to note]
I sometimes use a tripod when shooting with my phone Camera,
The old MODEL was bulging and could not be used,
It is slightly flattened and can be used if handled carefully.
Photo attached for reference. Please check the gap.
How did it compare to other products?
Recently, though, there are many similar products available at low prices, such as those made in China,
We are worried about this and have selected a well-known Manufacturer.
I also used Quad locks for a long time before, but Case and
It was a good product without any change in Base, etc.
▼ Other items that would be helpful include.
GlassFilm on the phone in Product Review,
I had seen that it would not stick depending on the object,
In my case, I am able to use it with it on without any problems.
View detail
Fits: Others iPhone12Pro, Others iPhone12
UA UA SMART phone Hard case iPhone12
[How is it used?
We always use it when we go a little farther.
Was the one you received as per Image?
As per Image.
How was your experience with it?
Exactly because it is dedicated to the iPhone 12.
It is too tight and takes a bit of time to remove from Case.
It also included a Cable for LIGHTNING charging.
Waterproof also looks fine.
[Points to note]
Mount is sold separately. Several types are available.
OPEN CLOSE on the Case, once you understand the structure.
I wonder if there is a possibility of breaking it if you force it by force.
QR code recognition at service stations (Cosmo Petroleum) is
It was like a Limit entering the slot at an angle if it was per Case.
At first, I was afraid it wouldn't fit. But I managed to get it in.
How did it compare to other products?
It feels very well made.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
being imaginative and creative
Originally a Smartphone Case to be attached to a Belt etc., but I attached it to a Tank Bag.
Belt loops can be applied to both height and width.
It would be useful when you want to check Navigation on your phone while Touring (while stopped).
View detail
Purchased with interim implications.
The phone is not exposed and has a Fall Prevention Strap. (Plastic)
It's not as hot as they say, maybe good for the winter/rainy season.
Not a bad product if you're willing to accept the pros and cons.
View detail
Your phone will heat up in the hot sun.
When we considered buying a Smartphone Holder, we chose this product because it has the least chance of falling and can be used in rainy weather. However, in the hot summer sun, your phone will run out of heat and fall off after just a few hours of running. (Because there's no cooling air.) Because I can't do anything, I buy Open Type's folder in addition and use it when the weather is fine. I think that there is "some" if I can divide it with Holder only for rainy weather. View detail
Fitting feeling etc...perfect!
It's a very accurate product for iPhoneX only.
The quality of this product is much better than the cheap Chinese ones, although the price is high.
It is a quality approved by the manufacturer, which is also available at SOFTBANK stores.
I will buy GILD design again next time I buy a new phone.
View detail
Maybe it's a good costumer, but...
I bought this for Navigation when I had to go away on a rainy day. I had a Ram Mount smartphone holder attached to it and I was able to install it to my phone. I did. When I was running while charging, the heat inevitably made it hard to see, but when I opened it up, water was coming in... It was a very good experience. View detail
Be careful of the thickness of GlassFilm
It's not a product issue
If a thicker glass film is applied, the film will float as it is pressed at the four corners
Film will be reapplied
View detail
It is strong against rain and easy to use.
Various kinds of goods of this kind got out, I was worried at the beginning, but fixing the smartphone naked was worried at the time of falling and raining, so I made it to Case type.
Although it used to be more than a year, there is a time when the Clear part of the surface gets harder and the reaction becomes dull as expected, but there is still no problem.
There are many kinds of Holder, We continue to use it as the adhesive type for MainMotorcycle and Bracket installation type for SecondMotorcycle.
View detail