Reviews
Very convenient
I have been using AIO-5 Lite for 6 months.
I thought I could do without it, but in my use Situation, I use CarPlay and Rear Camera quite a bit differently.
I have many Cases and purchased this one, which can be operated without taking my hand off the Handlebar.
When the Handlebar is turned all the way to the Left, the REMOTE CONTROLLERBody and the Inner of the Cowl are slightly in contact with each other.
Coped by sticking Sponge tape on the corner of the REMOTE CONTROLLER.
View detail
REMOTE CONTROLLER installed.
It is good to be able to operate it with REMOTE CONTROLLER without having to Touch the screen, although it is operated while the car is stopped. View detail
Fits: Others AIO-5 Lite
It's a relief to have it.
[How is it used?
I am very satisfied
Was the one you received as per Image?
I think it's a little large.
Was the installation difficult?
I was able to install it with no problems at all.
How was your experience with it?
Satisfied because I can always check the air pressure
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Display may not be necessary during Navigation/Drareco screen
View detail
Easier to operate.
[How is it used?
easy to handle
Was the one you received as per Image?
I was surprised at how small it was!
How was your experience with it?
I can't imagine being without it anymore.
[Points to note]
aspect of installation
How did it compare to other products?
No comparison
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like a little more flexibility in the mounting Bracket.
View detail
Very good
Delivery was fast, and the product was great. I would like to recommend it to everyone. Very good. Highly recommended. . View detail
Fits: DUCATI GT1000, DUCATI Sport1000, KAWASAKI H2, KAWASAKI H2R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, SUZUKI GSXR1000, YAMAHA YZF-R1, SUZUKI GSXR1000
Just fit
I installed it on the front fork protrusion (12mm) of Ducati 900SS. 17mm ball, so I matched it with KaEdia's AluminumHold modified KDR-M6S-1, and it was perfect. View detail
Fits: Others AIO-5 Lite
That's a handy Option.
I only check the air pressure during inspections and maintenance, so it's good for me to be able to check it all the time, as I am a pain in the ass! View detail
Fits: Others AIO-5 Lite
Air pressure and temperature can be checked at all times for peace of mind!
It looks Large and a little awkward.
The air valve is sideways mounted, but it may hit the caliper if the gap between the caliper and the car is too narrow.
Compared to the regular Air Valve Cap (1 Gram), it is a little heavier since it is 7 Grams including the Nut, but it is not uncomfortable to ride on (it may be off when measuring Balance?). (Balance measurement may be off?).
SensorBody was easy to install, paired, and configure.
Since I don't always check the air pressure all the time, it is nice to know what the air pressure is at the time. There was almost no difference in the values from the air gauge I had on hand.
It is also reassuring to know the Tire temperature, especially in winter.
If you are going to install the high-performance SMARTRideMonitor, it is recommended to install the Air Pressure Sensor together with the SMARTRideMonitor.
View detail
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe
Installation is quite easy!
[How is it used?
QUAD LOCK was selected to mount the phone when Touring, and this one was selected with a 1InchBall stacked on top of it.
Was the one you received as per Image?
Yes
How was your experience with it?
There is nothing wrong with that.
[Points to note]
Tightening Torque:30Nm
How did it compare to other products?
So far Kaedear." and did not feel inconvenienced, but wanted to make the Handlebar area Compact.
Other items that would be helpful
Observe the installation point and hang/regulation Torque:30Nm
Items to be purchased together/The intermediate mount that connects this Body to the QUAD LOCK is required separately.
I reused my previous kaedear intermediate mount
( https://www.webike.net/sd/25611697/)
Opinions and requests to Manufacturer/None in particular.
View detail
SIGN HOUSE
My previous Smartphone Holder was only slightly adjustable, but this one is great because I can adjust it to an angle I can easily see! View detail
SIGN HOUSE
Good texture and adjustable to an angle that is easy for me to see. View detail
Intermediate Mount Crime Prevention
Here are some pictures from unpacking to assembly. It was Large odd because the cat was in the way.
There are two types of intermediate mounts:hand-tightened and Wrench security, but KaEdiaBody has a conversion circuit.
I chose security because I had it and it would be a painful expense if it was pulled out.
As explained in the photo, the outside of the wrench and the groove of the wrench are turned with a special Wrench.
The part was of a structure that rotated idly and could not be turned when it was turned to steal it.
I didn't really understand the structure until I opened it.
Our Motorcycle was unified with SP CONNECTO, but the new ContiGT650 is a newcomer.
I could not install it with Separate handle and chose this one via 1 inchBall.
The ball also comes in 15mm, 17mm, and 25.4mm (1 inch), so I was a bit confused at first.
Body side 1 inchBall is a type that is attached to the Top Bridge, Hachioji Re-ARAI's.
The Option was lightly over $20,000 for this alone with the Original product.
View detail
The quality is good, but a bit expensive.
I have been using a SYGN HOUSE mounting system for over 10 years now. I am thinking of replacing it when it breaks, but it does not break easily. It is not a part that is always in operation, does not interfere with other parts, and does not rust or get scratches. It is quite sturdy. Currently, I have installed this on both VINO and XJR1300, and am replacing the top part from B Parts. (Smartphone Holder is already installed on the Others separately.)
However, you can get a Smartphone Holder at a reasonable price at each SiteShop, so there may be no need to choose this product, but just to give you an idea of the advantages of this product, we recommend the following
・Luxury texture
High durability
Scalable with a combination of Base, Arm, and Holder
I think that is what this means.
By the way, for my own use, I use Panasonic's GORILLA. A-14 PNDWaterproof I put it in a transparent Case called "Transparent Case" and installed it in the Handlebar. Unfortunately, this transparent Case seems to have been dropped from SYGN HOUSE's LineUp. I have been using this method since the days of the mobile phone, but now I check the running Route exclusively with the phone attached to the Holder, so this one is mainly for checking the overall map and listening to music. (The surface of the Vinyl case can be operated through the leather gloves & through the case)
I think it is a recommendation for those who want to get satisfaction from the quality of the product. However, it is rather expensive if you have all the ABC parts.
View detail
convenient stand
My motorcycle is YAMAHA XMAX300. There is no place to install the extended recorder and mobile phone holder on this car, and the bundled installation is not very stable, so I bought this ATOP extension holder on webike. This holder is installed on the windshield. It will not block the dashboard, nor will it take up the handlebars. There are many installation positions on it to easily install mobile phone holders and recorders, which is very convenient. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. This bike is not installed with the position of the expansion recorder and mobile phone bracket. The bundle installation is not stable, so I buy this ATOP expansion bracket on Webike. This stand is installed in the windshield position. It will not block the dashboard, nor does it take up the handbars. There are many installation locations that can be convenient to install the mobile phone bracket and recorder, which is very convenient. Powered by Google Translator View detail
Screws to attach to Navigation are required separately
I bought this to install on my Nankai Navigation for Motorcycle. With the cheapo base that came with it.
It's different and far more durable! It didn't fall over from wind pressure and I'm Large satisfied!!!!
One thing to note is that the size is not exactly the same as the included pedestal, so you will need to purchase a separate stainless steel pedestal.
I bought more screws from Home center and installed them.
View detail
I used it to install a voltmeter!
It was used to install a Ditona voltmeter on a Multi Bar.
Just fit! I think it's a Level that can be called an exclusive product!
A little expensive for a small?" I thought at the time of purchase that the quality was high, but no problem!
Very Recommendation!!!!
View detail
For use with the Camera for Drama Recording
It was purchased to divert the Band portion of the product, not for its original use.
When replacing the rear blinker, I needed to stick out the Camera of the DVR to avoid interference, which was not possible with the bracket that came with the DVR. I figured that if I removed the rubber sheet that came with this product, I could get it to work, and it worked.
The product was useful in unexpected ways.
View detail
Looks like it's new.
I purchased and used it several years ago. I purchased a new one this time because I purchased SecondMotorcycle.
There were Long, Semi-long, and Short, but I bought the Semi-long.
The difference from the previous version is that the head of the bolt is now triangular instead of polygonal. The triangular head is easier to turn, and can be turned with gloves on.
It is well made
The price is high, but considering the possibility of losing the phone while driving and replacing it due to deterioration, etc., I think it is worth buying.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI 1400GTR
Installed in 2023 MODEL zx6r
Used with gopro to shoot Circuit running video.
Since the mount is a RAM Mount, the size of the ball section is
I was worried because it was a little different.
I was able to use it without any problems.
View detail