Reviews
![Tire Pressure Sensor (Front/Rear) [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-002_01_TS.jpg)
Fits: Others AIO-5 Lite
Tire, Management
I think it is very good to know the air pressure and temperature of the tires. The only thing is that it is a little expensive, but it is very useful when I am on the road. View detail
Used in combination with KDR-M14C
It is used in combination with KDR-M14C.
I use it on a road motorcycle, but since it is not for motorcycles, it may not be very effective.
There is no high frequency vibration like Motorcycle, so it may not have been worth it. I bought it for comfort.
View detail
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
![LCD Protective Glass Film [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-007_TS.jpg)
Body is expensive, so it is safer to put it up.
Since Body is quite expensive, I bought it just in case.
The large size is Exactly because it is a dedicated product.
There is no specific Instruction Manual.
There is no installation Guide or anything like that, so after locating the Large body, you just peel off the Seat and take a shot without thinking.
I was nervous, but it stuck well without any air bubbles.
I put on the protective Seat before installing the Body, so I do not know how the sensitivity of the LCD Touch panel on the Body has changed, but it responds properly.
Since the price is about the same as the LCD protection GlassFilm for the phone, it would be safer to put it on.
View detail
Used in Touring!
I purchased this product as a vibration countermeasure for my phone. I had seen the installation situation on You Tube, etc. beforehand, so I was able to install it Smoothly while looking at the Instruction Manual.:Set. In other companies' Impression, a fixed Ring is Loose. I was introduced to the phenomenon, and I was no exception. While idling at a roadside station, I noticed a different sound than usual. The fixed ring had loosened spectacularly. Since then, when I depart in the morning Loosening." I try to make sure that I am ready to go before I leave. Sometimes I touch it at CoffeeTime to check it. I will check the durability and so on next Season. View detail
Used with KDR-M11C
Installed on KDR-M11C.
There are three different hardnesses to choose from. For the time being, we will use the Middle, which was included from the beginning.
I don't know how effective it is, but I put it on as a precaution because I don't want my phone to break.
View detail
I use it on my iPad Air5.
Purchased for use on a tabletop or in a car, not for mounting on a Motorcycle. I use it with other Suction Cup type, Clamp, Arm and other Ram Mounting systems.
I usually carry around my iPad Air 5 with a Case that can also be used as a STAND, but I don't like to remove this Case and attach it to the Holder every time, so I was looking for a Holder that can be used with the Case still attached. RAM MOUNTS RamMount TabTight for iPad (1st-4th Gen) I decided to try the As a result, it can be used normally with the Case installed. Charging in this state is also “somehow”possible.
The product is not used in Motorcycle, but in daily life Level, and there has been no drop in this state so far.
View detail
I bought it to install a Radar detector.
The installation was done exactly as desired. The texture is perfect. View detail
Bought to use Radar detector
It is well made and the Radar detector is secured as desired. View detail
Used to fix voltmeters
It is inexpensive compared to other products. It can be installed anywhere.
It is a good item
View detail
There was one for a Large-ish phone!
It has been about 18 months since I purchased Ram MountBody in September 2020. During that time, I used it about 1-3 times per month when Touring, and before I knew it, theRubber was shredded.
I had a feeling that it would break off at some point, since I had been stretching the Rubber as hard as I could to fit it into the largest one I could mount (iPhoneXS Max).
I had no choice but to replace only Rubber, so I pulled up the Ram Mount product list...?
Fa Brett." ? What does that mean? → I heard this is what they call the middle Size between a smart phone and a Ta Brett (I've never heard of it before). If my sma... Fa Brett." ？？
So I bought this Size to try it out.
As it turned out, it fit perfectly!
I wonder if this Size has been around for a while? I'm glad I found it.
View detail
To prevent theft.
Using Ram Mount, I have attached Charger of LIVE BUE REMOTE CONTROLLER of SONY, I purchased this product for its theft prevention.
Easy to install on Ram Mount Arm.
I've been using it for touring for about 2 years and it's very reliable, no problems using it in the rain.
It's a little tough!
View detail
It's better to install the ball side first. Apply anti-looseness.
Used for long arms. It's pretty good.
It's better to install the ball side first with Screw Lock or other anti-loosening material.
View detail
If you won at Rose, you definitely need to buy this one too!
The Ram Mount is a white product that can be combined in various ways, and since I bought it in a combination, I didn't buy this rubber grip.
I didn't know what I was going to use it for in the first place.
There was a significant bump while touring at high speed, and when the motorcycle was rocked, the phone fell out of the XGrip with difficulty, and I managed to hang on to the charging cable and get out of it.
I've been using this product ever since. (When there's a risk.) I use it
It's essential.
My heart really felt like it was going to come out of my mouth at that moment.
View detail
Is 10Inch too big for a Motorcycle?
I used to use the Navigation app on my phone, but I was worried about rain, so I bought this product to make a waterproof Brett. 10Inch is easy to read on a motorcycle, but it's too big. 7Inch is about the right size. Nah. As for the details, the Rubber on the Holder tore and the Rubber on the Open/Close Lever was glued back on, but it was gone before I knew it. View detail
I wonder if it's good for the price
LEAD Industries' "Glass Maholder I bought this for the installation of the
If it was about $2,000 for the Holder and Bracket, it was a trial run
When I actually installed it on the Motorcycle's Handlebar, it looked like it would hold it in place It is However "Chica La will be required, though (laughs)
I'm looking forward to attaching the Mobile phone to the Holder and running it for real
View detail
theft deterrence
As Ram Mount explains, I expect it to have a deterrent effect on theft
Now I just hope it doesn't break in future use
View detail
Grip strength is great!
The hardness is moderately good and the Grip power is great
I'm using it now, but one is gone and I've purchased it to replenish
Maybe it's the Collector? I'm plucking I'm so hungry
I hope you are not a Motorcycle enthusiast May heaven help you!
View detail
Large I like it
The actual running is not yet, but it is fixed firmly, and the installation rubber part is soft but firm Hold is ready
We will check for shaking, looseness, etc. when the car is running
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja H2SX
Gourgo Montissho 1000 Chaos
Purchase to attach Smartphone Holder. I think that it is an interesting product.
Because it made it Black, it seems that there is not much discomfort even if I remove the Smartphone Holder..
Screw lock A lot of paint is painted,
It is quite a Torque.. Prepare 8 mmHex so as not to lick.
I think that it is better to mark the Handlebar angle before removing Screw.
It seems that it can also be used for movie shooting with ActionCam.
View detail