Reviews
Price is high but desire to own is satisfied
If you ignore the price, it's great.
However, the Risk of theft is now clearly higher when you are out and about etc.
5,900 yen for a mere ArmParts
Texture is the best
It also satisfies the desire for ownership.
Anyway, it's expensive.
I'm ordering from Manufacturer, but I don't mind if it's sold separately, so I can get a Screw with anti-theft measures later.
I wish they would release it.
I changed to Screw Tightening with Hexagonal Wrench
View detail
Quality is top notch
If you ignore the price, I don't think you can find a better quality ClampBase than this one.
It satisfies my desire to own one.
View detail
Very convenient
I have been using AIO-5 Lite for 6 months.
I thought I could do without it, but in my use Situation, I use CarPlay and Rear Camera quite a bit differently.
I have many Cases and purchased this one, which can be operated without taking my hand off the Handlebar.
When the Handlebar is turned all the way to the Left, the REMOTE CONTROLLERBody and the Inner of the Cowl are slightly in contact with each other.
Coped by sticking Sponge tape on the corner of the REMOTE CONTROLLER.
View detail
REMOTE CONTROLLER installed.
It is good to be able to operate it with REMOTE CONTROLLER without having to Touch the screen, although it is operated while the car is stopped. View detail
Fits: Others AIO-5 Lite
It's a relief to have it.
[How is it used?
I am very satisfied
Was the one you received as per Image?
I think it's a little large.
Was the installation difficult?
I was able to install it with no problems at all.
How was your experience with it?
Satisfied because I can always check the air pressure
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Display may not be necessary during Navigation/Drareco screen
View detail
Easier to operate.
[How is it used?
easy to handle
Was the one you received as per Image?
I was surprised at how small it was!
How was your experience with it?
I can't imagine being without it anymore.
[Points to note]
aspect of installation
How did it compare to other products?
No comparison
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like a little more flexibility in the mounting Bracket.
View detail
Very good
Delivery was fast, and the product was great. I would like to recommend it to everyone. Very good. Highly recommended. . View detail
Effects not known.
I installed it to prevent my phone from malfunctioning.
The installation itself is easy, but so far the effect is unknown.
It would be nice to have three different hardnesses.
View detail
Fits: DUCATI GT1000, DUCATI Sport1000, KAWASAKI H2, KAWASAKI H2R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, SUZUKI GSXR1000, YAMAHA YZF-R1, SUZUKI GSXR1000
Just fit
I installed it on the front fork protrusion (12mm) of Ducati 900SS. 17mm ball, so I matched it with KaEdia's AluminumHold modified KDR-M6S-1, and it was perfect. View detail
Fits: Others AIO-5 Lite
That's a handy Option.
I only check the air pressure during inspections and maintenance, so it's good for me to be able to check it all the time, as I am a pain in the ass! View detail
Fits: Others AIO-5 Lite
Tire, Management
I think it is very good to know the air pressure and temperature of the tires. The only thing is that it is a little expensive, but it is very useful when I am on the road. View detail
Used in combination with KDR-M14C
It is used in combination with KDR-M14C.
I use it on a road motorcycle, but since it is not for motorcycles, it may not be very effective.
There is no high frequency vibration like Motorcycle, so it may not have been worth it. I bought it for comfort.
View detail
Fits: Others AIO-5 Lite
Air pressure and temperature can be checked at all times for peace of mind!
It looks Large and a little awkward.
The air valve is sideways mounted, but it may hit the caliper if the gap between the caliper and the car is too narrow.
Compared to the regular Air Valve Cap (1 Gram), it is a little heavier since it is 7 Grams including the Nut, but it is not uncomfortable to ride on (it may be off when measuring Balance?). (Balance measurement may be off?).
SensorBody was easy to install, paired, and configure.
Since I don't always check the air pressure all the time, it is nice to know what the air pressure is at the time. There was almost no difference in the values from the air gauge I had on hand.
It is also reassuring to know the Tire temperature, especially in winter.
If you are going to install the high-performance SMARTRideMonitor, it is recommended to install the Air Pressure Sensor together with the SMARTRideMonitor.
View detail
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
Body is expensive, so it is safer to put it up.
Since Body is quite expensive, I bought it just in case.
The large size is Exactly because it is a dedicated product.
There is no specific Instruction Manual.
There is no installation Guide or anything like that, so after locating the Large body, you just peel off the Seat and take a shot without thinking.
I was nervous, but it stuck well without any air bubbles.
I put on the protective Seat before installing the Body, so I do not know how the sensitivity of the LCD Touch panel on the Body has changed, but it responds properly.
Since the price is about the same as the LCD protection GlassFilm for the phone, it would be safer to put it on.
View detail
Fits: Others AIO-5 Lite
Neither good nor bad
Installed at the same time as SMARTRideMonitorSRS-001.
Or rather, it is a product with Monitor.
To install, simply screw it into the Valve cap.
There is nothing difficult to do.
The Monitor displays Tire air pressure and temperature.
A warning will be displayed if the pressure is less than the set pressure value/Large.
To be honest, the TPMS I used to use has more functionality than that, such as being able to set air pressure in the front and rear Tire and check it on my phone.
Well, since we have SMARTRideMonitor, I will use this one.
View detail
Used in Touring!
I purchased this product as a vibration countermeasure for my phone. I had seen the installation situation on You Tube, etc. beforehand, so I was able to install it Smoothly while looking at the Instruction Manual.:Set. In other companies' Impression, a fixed Ring is Loose. I was introduced to the phenomenon, and I was no exception. While idling at a roadside station, I noticed a different sound than usual. The fixed ring had loosened spectacularly. Since then, when I depart in the morning Loosening." I try to make sure that I am ready to go before I leave. Sometimes I touch it at CoffeeTime to check it. I will check the durability and so on next Season. View detail
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe
Installation is quite easy!
[How is it used?
QUAD LOCK was selected to mount the phone when Touring, and this one was selected with a 1InchBall stacked on top of it.
Was the one you received as per Image?
Yes
How was your experience with it?
There is nothing wrong with that.
[Points to note]
Tightening Torque:30Nm
How did it compare to other products?
So far Kaedear." and did not feel inconvenienced, but wanted to make the Handlebar area Compact.
Other items that would be helpful
Observe the installation point and hang/regulation Torque:30Nm
Items to be purchased together/The intermediate mount that connects this Body to the QUAD LOCK is required separately.
I reused my previous kaedear intermediate mount
( https://www.webike.net/sd/25611697/)
Opinions and requests to Manufacturer/None in particular.
View detail
Used with KDR-M11C
Installed on KDR-M11C.
There are three different hardnesses to choose from. For the time being, we will use the Middle, which was included from the beginning.
I don't know how effective it is, but I put it on as a precaution because I don't want my phone to break.
View detail