Reviews
![Tire Pressure Sensor (Front/Rear) [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-002_01_TS.jpg)
Fits: Others AIO-5 Lite
It's a relief to have it.
[How is it used?
I am very satisfied
Was the one you received as per Image?
I think it's a little large.
Was the installation difficult?
I was able to install it with no problems at all.
How was your experience with it?
Satisfied because I can always check the air pressure
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Display may not be necessary during Navigation/Drareco screen
View detail
![Pro Wireless Remote Control [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-006_01_TS.jpg)
Easier to operate.
[How is it used?
easy to handle
Was the one you received as per Image?
I was surprised at how small it was!
How was your experience with it?
I can't imagine being without it anymore.
[Points to note]
aspect of installation
How did it compare to other products?
No comparison
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like a little more flexibility in the mounting Bracket.
View detail
Fits: Others AIO-5 Lite
That's a handy Option.
I only check the air pressure during inspections and maintenance, so it's good for me to be able to check it all the time, as I am a pain in the ass! View detail
Fits: Others AIO-5 Lite
Tire, Management
I think it is very good to know the air pressure and temperature of the tires. The only thing is that it is a little expensive, but it is very useful when I am on the road. View detail
Fits: Others AIO-5 Lite
Air pressure and temperature can be checked at all times for peace of mind!
It looks Large and a little awkward.
The air valve is sideways mounted, but it may hit the caliper if the gap between the caliper and the car is too narrow.
Compared to the regular Air Valve Cap (1 Gram), it is a little heavier since it is 7 Grams including the Nut, but it is not uncomfortable to ride on (it may be off when measuring Balance?). (Balance measurement may be off?).
SensorBody was easy to install, paired, and configure.
Since I don't always check the air pressure all the time, it is nice to know what the air pressure is at the time. There was almost no difference in the values from the air gauge I had on hand.
It is also reassuring to know the Tire temperature, especially in winter.
If you are going to install the high-performance SMARTRideMonitor, it is recommended to install the Air Pressure Sensor together with the SMARTRideMonitor.
View detail
![LCD Protective Glass Film [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-007_TS.jpg)
Body is expensive, so it is safer to put it up.
Since Body is quite expensive, I bought it just in case.
The large size is Exactly because it is a dedicated product.
There is no specific Instruction Manual.
There is no installation Guide or anything like that, so after locating the Large body, you just peel off the Seat and take a shot without thinking.
I was nervous, but it stuck well without any air bubbles.
I put on the protective Seat before installing the Body, so I do not know how the sensitivity of the LCD Touch panel on the Body has changed, but it responds properly.
Since the price is about the same as the LCD protection GlassFilm for the phone, it would be safer to put it on.
View detail
Fits: Others AIO-5 Lite
Neither good nor bad
Installed at the same time as SMARTRideMonitorSRS-001.
Or rather, it is a product with Monitor.
To install, simply screw it into the Valve cap.
There is nothing difficult to do.
The Monitor displays Tire air pressure and temperature.
A warning will be displayed if the pressure is less than the set pressure value/Large.
To be honest, the TPMS I used to use has more functionality than that, such as being able to set air pressure in the front and rear Tire and check it on my phone.
Well, since we have SMARTRideMonitor, I will use this one.
View detail
I used it to install a voltmeter!
It was used to install a Ditona voltmeter on a Multi Bar.
Just fit! I think it's a Level that can be called an exclusive product!
A little expensive for a small?" I thought at the time of purchase that the quality was high, but no problem!
Very Recommendation!!!!
View detail
For use with the Camera for Drama Recording
It was purchased to divert the Band portion of the product, not for its original use.
When replacing the rear blinker, I needed to stick out the Camera of the DVR to avoid interference, which was not possible with the bracket that came with the DVR. I figured that if I removed the rubber sheet that came with this product, I could get it to work, and it worked.
The product was useful in unexpected ways.
View detail
Used to fix voltmeters
It is inexpensive compared to other products. It can be installed anywhere.
It is a good item
View detail
On the REMOTE CONTROLLERBracket of the Drrorecorder
I use it as a Bracket for my Mistuba Sankoit EDR-21 REMOTE CONTROLLER. The size of the bracket is very small and the handlebar is not too tight. View detail
As a mounting bracket for DAYTONA voltmeter
Very happy with the ability to set any angle View detail
Used for Drorecorded Camera
The camera bracket of the Chinese Drorekos was not reliable because it was made of plastic, so I diverted it.
Quantity Camera through the bar originally:Set, I had to bite the Rubber board because it was not thick enough.
The angle and the tightening of the bar are the same.
It was a bent steel plate with a low texture and the price seemed high.
It's not rigid, so I think it's better to limit its use to light GPS and ETCAntennas etc. in its original use.
View detail
On the clock tower
Oil Temperature Gauge's watch was attached until now, but Spec. Changes make the clock run out
I used this Bracket to attach another watch.
It is reasonable from the price
View detail
For fixing the cigarettes
I bought a new Ing's Cigar socket, but since it was not a Type directly attached to the Handlebar, I wore this Mount on the Handlebar and fixed it on it with a Double-sided Tape.
I am happy because I do not take space at Compact.
View detail
It is okay
I bought it to install the Digital voltmeter.
Size was also Small and Exactly
Somehow made it was a weak feeling.
If you make this, I felt it was cheaper a little more.
View detail
For voltmeter installation
Thermometer and voltmeter etc. In order to install, I bought it.
We selected this product because the price is fixed for the firmly made Mount.
It looks tasty, but it has been around for 2 years, it is usable without problems.
View detail
Small Mountable for swinging
I purchased Repeat for ETC Antennas.
Lightweight Simple is convenient for mounting Small objects.
Screw's Length wants you to extend it by 5 mm.
I changed from attached Screw to Hexagon socket Bolt, Nut with Flange
View detail
Multi-mount
It took a while to install.
I felt Small when I actually received it compared with the image of the product, it was better to have a little Large.
The price is cheap and I am satisfied!
View detail
It was somewhat different from Image.
I did not think that it was such a small thing, but when I actually arrived, it was Small than what I was doing. It was good because it was able to be used without problems. View detail