Reviews
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Screws to attach to Navigation are required separately
I bought this to install on my Nankai Navigation for Motorcycle. With the cheapo base that came with it.
It's different and far more durable! It didn't fall over from wind pressure and I'm Large satisfied!!!!
One thing to note is that the size is not exactly the same as the included pedestal, so you will need to purchase a separate stainless steel pedestal.
I bought more screws from Home center and installed them.
View detail
I use it on my iPad Air5.
Purchased for use on a tabletop or in a car, not for mounting on a Motorcycle. I use it with other Suction Cup type, Clamp, Arm and other Ram Mounting systems.
I usually carry around my iPad Air 5 with a Case that can also be used as a STAND, but I don't like to remove this Case and attach it to the Holder every time, so I was looking for a Holder that can be used with the Case still attached. RAM MOUNTS RamMount TabTight for iPad (1st-4th Gen) I decided to try the As a result, it can be used normally with the Case installed. Charging in this state is also “somehow”possible.
The product is not used in Motorcycle, but in daily life Level, and there has been no drop in this state so far.
View detail
There was one for a Large-ish phone!
It has been about 18 months since I purchased Ram MountBody in September 2020. During that time, I used it about 1-3 times per month when Touring, and before I knew it, theRubber was shredded.
I had a feeling that it would break off at some point, since I had been stretching the Rubber as hard as I could to fit it into the largest one I could mount (iPhoneXS Max).
I had no choice but to replace only Rubber, so I pulled up the Ram Mount product list...?
Fa Brett." ? What does that mean? → I heard this is what they call the middle Size between a smart phone and a Ta Brett (I've never heard of it before). If my sma... Fa Brett." ？？
So I bought this Size to try it out.
As it turned out, it fit perfectly!
I wonder if this Size has been around for a while? I'm glad I found it.
View detail
For Large-eyed Smartphones
Purchased for spare parts.
I'm currently using one for a phone up to about 5-inches, but I've switched to a larger phone, so I'll replace it when it runs out.
I've applied a MAJOR amount to the image so you can see how large it is, if you want to check it out.
View detail
To prevent theft.
Using Ram Mount, I have attached Charger of LIVE BUE REMOTE CONTROLLER of SONY, I purchased this product for its theft prevention.
Easy to install on Ram Mount Arm.
I've been using it for touring for about 2 years and it's very reliable, no problems using it in the rain.
It's a little tough!
View detail
As Repair Parts and as Decoration
[How is it used?
About 10,000km for 1 year with YZF-R25, about 60,000km for 4 years with YZF-R6.
Even on the highway in the rain and wind, or on the circuit using high rpm, the rubber does not come off.
Including the initial Black Rubber.
Highways with strong winds include the Hon Qing Poverty.
Was the one you received as per Image?
As Image because of Large body Blue although I feel that the color tone is different from the image.
Was the installation difficult?
It is a tool hibiscus and very easy.
All you have to do is pull out the original one, drop some glue on it and insert it.
How was your experience with it?
The XPERIA5 can be mounted safely even in situations where it is subjected to strong winds such as highways. It is easy to mount and easy to remove, and it did not spoil the function that can be mounted with ease.
[Included Parts:were they on?
Glue. And it comes with a sheet of paper that I haven't opened yet, Instruction Manual?
[Was there anything that disappointed you?
nothing special
Point and hang of installation
It should be inserted before it drips.
View detail
It's better to install the ball side first. Apply anti-looseness.
Used for long arms. It's pretty good.
It's better to install the ball side first with Screw Lock or other anti-loosening material.
View detail
If you won at Rose, you definitely need to buy this one too!
The Ram Mount is a white product that can be combined in various ways, and since I bought it in a combination, I didn't buy this rubber grip.
I didn't know what I was going to use it for in the first place.
There was a significant bump while touring at high speed, and when the motorcycle was rocked, the phone fell out of the XGrip with difficulty, and I managed to hang on to the charging cable and get out of it.
I've been using this product ever since. (When there's a risk.) I use it
It's essential.
My heart really felt like it was going to come out of my mouth at that moment.
View detail
Is 10Inch too big for a Motorcycle?
I used to use the Navigation app on my phone, but I was worried about rain, so I bought this product to make a waterproof Brett. 10Inch is easy to read on a motorcycle, but it's too big. 7Inch is about the right size. Nah. As for the details, the Rubber on the Holder tore and the Rubber on the Open/Close Lever was glued back on, but it was gone before I knew it. View detail
Happy!
Touring, and without knowing it while driving, one of the Rubbers flew away and I was in danger of finding myself in My phone was about to fall off
I ordered a Rubber in a hurry!
Ram Mount has a Parts sale, which helps
I installed it right away
I even glued it well this time!
View detail
good
With the RAM Mount, it's a rubber for smartphones purchased for Daytonaradar installation It's too tight and tearing, so I chose this one? It came out good! View detail
You might want to replace it regularly
A few years after purchasing the XGrip, when I got over the Large Gap, I was able to get it from the Holder
It had become a rare occurrence for the phone to drop out
As the surface of the rubber cap has become hard and slippery with age
I felt it, so I bought a new one to try it out
When you touch the new one, the surface is soft and chewy
Holdability seems to be obviously better than the one that has changed over time
So far, the dropout has not recurred
I was considering repurchasing the XGripBody, but it looks like I won't have to
View detail
theft deterrence
As Ram Mount explains, I expect it to have a deterrent effect on theft
Now I just hope it doesn't break in future use
View detail
Grip strength is great!
The hardness is moderately good and the Grip power is great
I'm using it now, but one is gone and I've purchased it to replenish
Maybe it's the Collector? I'm plucking I'm so hungry
I hope you are not a Motorcycle enthusiast May heaven help you!
View detail
good
The original Grip that came with it is gone, so I bought it
I glued it on tightly and made it hard to lose
If you're using the same Mount, it's a good idea to have a spare
View detail
Large I like it
The actual running is not yet, but it is fixed firmly, and the installation rubber part is soft but firm Hold is ready
We will check for shaking, looseness, etc. when the car is running
View detail
For ipad mini 4 Navigation
I use it to fix ipad mini 4.
Since this product Single Body is weak in fixation, it can be fixed firmly by using it together with X-Grip holder UN 8.
Ipad mini 4 can be used even in the rainy season by using Case cover of Life proof sold separately.
View detail
7InchTab turns diagonally while running.
It can be said to be exclusive for iPad mini, in the pinched part
In the 7 Inch Tab which can afford a margin, while driving
Quantity : Pair (for Left and Right) It will be Gap this much.
The plastic part of the pinched part breaks in the screw Brett Holders,
There is no decision strike ...
View detail
Lifespan is one year !!
Mount itself is robust, but it sandwiches Ta Brett
A crack gradually enters the pla part, and within a year
To crack.
Even if you exchange parts, the delivery date is undecided and includes shipping fee 2000 yen or more,
Therefore it is more realistic to replace Body.
Stickiness to resin is insufficient. If it is JAPAN this is not the case.
View detail