Reviews
Used for SHOEIEX-ZERO
This size is ideal for helmets that do not have speaker holes like EX-ZERO and have no space in the mounting position.
I have used the standard Speaker and the thin Speaker, but the Smallest is the thinnest and the sound quality is the same as the others.
The price is a bit high, so IncomeQuantity:It would be appreciated if the Speaker of the Set could also be selected.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133556/25864484driverecoder_TS.jpg)
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Nice detail but good ??
I like it because it's easy to dress up and immeChain ??
However, it sometimes hurts that most of the colors are out of stock….
View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R
Multi Bar with USB power supply for convenience
Quantity of Smartphone Holder:If set, the USB power supply can be conveniently located nearby. The installation can be safely used in conjunction with the key by connecting it to ACC.
Connected to DAYTONA Attachment Power Supply Unit D-UNIT.
View detail
Change your clothes according to your mood ^_^.
There are many colors to choose from, and you can change them according to your mood. View detail
Sounds pretty good.
Installed on Shoei J Cruise. The installation took 1 to 2 hours with the help of Youtube.
The only purpose of use is to listen to music, and Income is not used.
I chose it because it claims high sound quality, and the sound quality is quite good. (Hobby Audio system).
However, when the speed is increased, the sound of the wind becomes loud, and the high sound quality is lost. 。 It's really good when it stops. (not the fault of this machine)
If you just want to play music, send songs, and adjust volume, Button operation is no problem.
It is better to use the included thicker Seat for better sound quality since the Speaker is closer. (If it doesn't hurt your ears when it hits them)
High mileage with 80% battery remaining (announced) after 7-8 hours of listening.
I think it would be very good with Motorcycle with good wind protection.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133360/20240315_daytona_driverecoder_sd_1080_1080_TS.jpg)
Pretty good
I don't know about other drarecorders, but it is a normal shot.
Command on Switch is easy to understand and the UserInterface of the application is very clear.
I feel that the parking monitor is less likely to be triggered by the weak battery in SR400. However, the engine is started within 5 KICKs.
View detail
DAYTONAMulti Bar Holder。
This is a quintessential DAYTONA product.
Fitting is outstanding.
Holderetc. on the bar.
View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail
I lost it, so...
22.I lost my ClampSpacer for 2mm, so I bought Repair Parts.
Only Repair Parts can be purchased for fragile parts, so they can be used for a long time.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
On Stem Mount
[How is it used?
GSX-R600 (K6) I purchased this product to install DAYTONA's Multi Bar on my
The compatibility list said that the model year was 2008 or later, but I measured the diameter on the actual vehicle and confirmed that there was no problem, so I chose this model.
Was the one you received as per Image?
I had bought other Sizes before, so it was as per Image.
How was your experience with it?
I confirmed beforehand that Size was fine, so of course I could use it.
Simply put it through the Mount on the Multi Bar, put it in the Stem Nut, and then tighten the Bolt.
Multi Bar could be fixed Firmly.
[Points to note]
It is recommended to measure the diameter of your motorcycle in advance as well as the fit.
How did it compare to other products?
I chose DAYTONA because it was troublesome to check the compatibility with Multi Bar or the hole diameter, etc.
Depending on the price, a cheap No Brand product would be fine.
【Review】
You can easily fix the Multi Bar to the Stem.
It is recommended to measure the inside diameter of your car's Stem to be sure.
View detail
My first Income purchase
Which Income should I buy?
I talked to a senior Rider about it.
Purchased because DAYTONA was recommended to me as a domestic product.
Currently, it is used only for Solo touring.
Easy to operate,
The Large change is useful because I can listen to voice and music while driving.
View detail
Modern necessities
I think Attachment is necessary in today's smartphone-essential world.
The clamp part is solid, so it seems unlikely to fall off while driving, but I am just a little worried about it digging into the Handlebar and scratching it.
It can be securely fastened to the Body even while still in the Smartphone Case.
There is also a locking mechanism so it won't rattle while driving, and it has an insurance band to prevent it from falling.
However, be careful not to use this band in the wrong position, as it can manipulate the volume button.
Vertical and horizontal rotation is also easy, but it is excellent because it does not turn on its own while driving.
It looks like you can choose with or without vibration control components, but I wondered … if it makes sense to go without.
They say that without vibration-damping components, the anti-shake function of the phone often breaks down! (According to a friend)
I decided to install it in the middle for visibility of the meter, but I think it would be better to install it a little closer to the left.
I will try various trial and error.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
My first Income
Purchased to listen to the Navigation guide.
Simple operation with few buttons is good.
The sound quality is sufficient as I only listen to the directions.
When it comes to listening to music, I thought it was not good.
It takes about an hour to complete charging, which is helpful.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
Cheap and convenient.
I used it on my GSX1300R HAYABUSA
I think it is essential for Smartphone Holder installation.
Cosmetically, it's great.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It worked on my iPhone 15Pro.
[How is it used?
I was considering a Smartphone Holder to view Navigation on my BMW R100 Twin suspension.
Was the one you received as per Image?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
Was the installation difficult?
Wiring around the Handlebar may be Large strange. The only thing to do is to wrap the included rubber parts around the handlebar, and then hook and fix it with a bracket.
I used DoctorRubber's Handlebar Grip Rubber as an anti-vibration measure. We recommend it as well!
https://www.webike.net/sd/25949395/
How was your experience with it?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
To remove the phone, pull the red lever in front of the reverse side toward you.:Pair (for Left and Right) The claws of the "I" release.
[Included Parts:were they on?
All Included Parts:required for installation are provided.
View detail
![[COOLROBO WIRECOM Replacement Parts] Sponge Set](https://img.webike-cdn.net/catalogue/images/41401/1_145759952180276300_m_0aom7_TS.jpg)
Repair COOLROBO GT2 Speaker
I bought it to repair the speaker's sponge that had deteriorated and come off.
Microphone sponge that I don't use is also Quantity:The cost seems high because it is a set and the product is well packaged, probably because it is sold in stores.
View detail
It slips and moves.
Used to attach the Smartphone Holder to the Pipe behind the Screen on the Honda 400X (2019) (with an additional Spacer that comes with the Smartphone Holder).
The size itself is just right, but the hard rubber makes it slippery, and even when the bolt is tightly tightened, it slips and moves. Therefore, I wrapped a thin double-sided tape around the pipe on the body side before installing the bolt, but it is not completely fixed because the outer side of the bolt also slides.
I'm considering replacing the Arm of the Holder with an aluminum spacer only for the type that is tightened with ZETA Bolt.
View detail