Reviews
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
It works fine
It was easy and fixed my phone with no problems. View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/p05-img-KS219A_TS.jpg)
Sideways orientation for smartphone mount○.
This is a replacement for DAYTONA's Smartphone Holder.
Body and Bracket are Material:I chose it because it is aluminum, seems sturdy, and looks small and unobtrusive.
If the phone is clamped in the normal portrait orientation, there is no support on the bottom side, and I don't want it to fall if it gets loose, so I turned it sideways and clamped it. I am self-satisfied that it is more convenient because the Navigation map looks wider this way (laugh).
The body and bracket are ball joints, so it is convenient to change the orientation freely, but I am concerned about the durability of the nut for fixing the body because it is made of brass. And it is made inexpensively in China.
View detail
![[iMMER] Clamp Bar](https://img.webike-cdn.net/catalogue/images/73029/ks262a_474_400_TS.jpg)
For Navigation
I put it on to use the phone mount.
I am satisfied with the minimum required construction.
View detail
Price suitable
[How is it used?
It was installed from when I bought XJR400R.
I don't like the Smartphone Holder around the Handlebar, so I used it a few times and removed it.
Was the one you received as per Image?
I think it is exactly as pictured.
How was your experience with it?
The comfort of the product is commensurate with the price. I didn't think it was particularly easy to use, but it was sufficient for my needs.
I was concerned about Hold strength.
[Points to note]
None in particular
How did it compare to other products?
I had another Smartphone Holder, but there is a price difference, but, honestly, that one was easier to use.
If it is a low Engine Displacement Volume system such as Scooter, I don't think there is any concern about falling because Speed is not produced.
View detail
![[iMMER] Clamp Bar](https://global.webike-cdn.net/photo/impression/28/28d552c50cb615dffddc2bd9e0677a29L.jpg)
I was looking for something Compact and Simple.
If you put a Switch on the Handlebar...
The mounting location of the Smartphone Holder is
It was installed in a delicate position.
Look for something less conspicuous.
We arrived at this product.
Very Compact
This in itself is not assertive in a good way.
I just hide behind my phone while driving.
I understand that the Material is hard resin.
Screw holes are reinforced with steel 。
The thickness of the part to be inserted into Mirror is 7 to 8mm, so
The length of Bolt should be noted.
You will need something about 10mm longer.
I found a good one.
View detail
Hold tight!
The angle and direction can be adjusted freely and it holds firmly, so it is stable and good.
There is no worry that it will fall off.
View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/ks257A474400_TS.jpg)
It's surprisingly useful.
I'm on a Sidecar made in Russia, Ural GEARUp 2015 MODEL.
I bought this to mount my phone instead of Navigation.
Quantity the phone:I have to tighten the Dial on the Right Side to set it.
If you tighten it strongly, it will interfere with the volume Switch on your phone.
So I tighten it loosely enough that it doesn't fall off.
I bought it and used it for more than 1 year and toured Hokkaido, Shikoku and Kyushu.
No one had any Trouble with breakage or dropping the phone etc.
It looks cheap, but it is very useful for us.
View detail
It's stable.
I actually drove with my phone on it and was able to adjust the angle and direction freely and the screen was very easy to see. I don't have to worry about it falling off because it holds my phone stable. When you take it off, it is convenient because it is One-touch with Release button. View detail
Cheap, but difficult to stabilize
I thought I could hold the four corners of the phone in place, but it was rattling.
There is too much rattle and I'm afraid my phone is going to fall out while driving.
I can't use the Tie Wrap without feeling like I have to.
There are also gaps at the top and bottom, but that's part of the structure. 。 But I think there are too many gaps.
If the Motorcycle is not subjected to sudden vibrations or shocks during street riding, is it barely usable?
But maybe I shouldn't complain because it's cheap.
I think it can be used if it is fixed firmly with Tie Wrap etc.
View detail
SimpleHolder
Bought this to mount my phone around the Handlebar and use the Navigation feature.
In order to cover the general Handlebar size, two kinds of collars for Size adjustment are included, and it is used after it is attached.
It looks SMART and holds the phone firmly in place, but you may want to purchase an additional thin Rubber sheet to prevent scratches and color slippage on the Handlebar.
The only way to secure your phone is with the Clamp mechanism, so I'm gonna fall on impact. It is not suitable for the person who is worried about it, but I think that it is not a problem because it does not falter even if it gives a considerable shock.
View detail
Purchased with interim implications.
The plastic ones are a bit weakly made, even if they are convincing.
It is difficult to understand the fit between Case and Bracket, and Case flew once. (Fall Prevention Strap is required.)
Don't put too much pressure on it.
Cost is good for both price and work, maybe enough for people who don't have a lot of pressure to run.
View detail
Purchased with interim implications.
The phone is not exposed and has a Fall Prevention Strap. (Plastic)
It's not as hot as they say, maybe good for the winter/rainy season.
Not a bad product if you're willing to accept the pros and cons.
View detail
It needs a lot of work, but it's a good cosmetic. (I wonder?)
First, I had to cutters to fit the optional Smartphone Holder. In addition, when I used it for several months, Button of Holder release did not work, so I Rose and Grease up. It is necessary to work on various things, but the cosmetic is not bad. View detail
Your phone will heat up in the hot sun.
When we considered buying a Smartphone Holder, we chose this product because it has the least chance of falling and can be used in rainy weather. However, in the hot summer sun, your phone will run out of heat and fall off after just a few hours of running. (Because there's no cooling air.) Because I can't do anything, I buy Open Type's folder in addition and use it when the weather is fine. I think that there is "some" if I can divide it with Holder only for rainy weather. View detail
If you're not wearing your phone, you're going to freak out.
I first bought the Full cover Holder for rainy weather, but my phone runs out of heat in hot weather, so I bought an additional one for sunny weather. The Hold function of the phone etc...the basic parts of the phone are fine, but the vibration freaks me out when I don't have my phone on. When I don't have my phone on, I remove the Holder itself. However, I don't think it's a bad cosmetic product. View detail
I'm glad I bought it
I bought it at the same time as the Navigation System Case KS-212A and installed it. I was worried that it was not fit to KS-212A, and it was written in the review of other sites that it was cut down a little.
I wanted to have a place to pass the Wire or something to prevent it from being dropped or stolen, even if it's unlikely.
View detail
Maybe it's a good costumer, but...
I bought this for Navigation when I had to go away on a rainy day. I had a Ram Mount smartphone holder attached to it and I was able to install it to my phone. I did. When I was running while charging, the heat inevitably made it hard to see, but when I opened it up, water was coming in... It was a very good experience. View detail
I think it's a passing grade
I install the rubber sheet on the Brace bar and use it Wrap it around and pinch it in the Sleeve and close the Clamp to secure it to the Brace bar The Clamp should be movable between the Sleeve and Clamp rather than completely fixed It seems to be designed to increase the range of motion of the phone in
The construction of the Parts that hold your phone in place is more solid and sizzlingly heavy than I expected It looks reliable
I tested it by cruising 100 km on the highway, but the problem of the screen is hard to see because of the shake There was not
I am not sure how long the product will last due to the plastic clamps
View detail