Reviews
Mounted horizontally
I installed a Screen on my car, so I installed this Smartphone Holder on the mounting arm of the Screen. The phone is large and the Screen is too small, so I had to install it horizontally. My phone is Xperia 5 IV and I was able to fix it by replacing the included extension parts.
When installing, use Color on the bar.:It was easy to put in the Gray protective rubber parts and secure them with the Silver locking parts. However, during the test run, the fixation was not tight enough and it came loose. It needs to be fixed a little tighter. Fixing the phone is also easy.:Pair (for Left and Right) The frame is fitted into the frame of the "I" and secured with a White Rubber Band, which provides a sense of security.
After a while of use, the upper and lower Quantities:Pair (for Left and Right) The lever becomes hard and does not move well, releasing the fixed frame of the Blowing lubricating oil revived it.
View detail
Not very good.
I used it for about a year and took it off.
First of all, it doesn't move well, and it's frustrating that it doesn't unlock (common individual difference in Chinese Smartphone Holder?).
My acquaintance's was running on Quantity.:Pair (for Left and Right) The inside of the fixed jaw was cracked (maybe the vibration was too severe because of the 250cc high speed driving)
It's cheap, but if it's made in China, it's about the same or cheaper price with charging function.
Most importantly, the possibility of an expensive phone falling out is terrifying.
The feeling of use was also bad, but I used it more patiently than I bought it, but I removed it at the opportunity of the damage of the acquaintance.
The value of the phone is unrelated to the Engine Displacement Volume of the motorcycle, so I think it should be considered.
However, if you put the included (also available at Repair Parts) silicon band on it, you will probably be spared from sudden drops, which is a must for this Smartphone Holder.
It's a popular product, but I personally didn't like it.
View detail
Smartphone Holder
Quantity:Pair (for Left and Right) In addition, it is stable and well supported at the top and bottom.
I don't think it will ever come off and fall off.
Recommended
View detail
Mounted on PCX160
I installed it on my PCX160.
I bought it because Navigation is a necessity for Touring etc.
There were two types of nails to fit the size of the phone, but the size of the phone was too large to fit.
I remove the upper nail and fix it in three places, and I fix the upper part with Silicon band of the fall prevention and use it, but so far
It does not seem to fall while driving.
The mounting part is Material:It's aluminum so it's durable and easy to use because you can attach and detach your phone with One-touch.
If I had wanted to, I would have wanted Color variations.
View detail
Switch from WaterproofHolder
[How is it used?
Used with Huawei P20 light
Was the one you received as per Image?
As per the Image, the impression is that it stops the phone more firmly than I expected.
How was your experience with it?
As long as you keep out of the rain, you'll be fine.
[Points to note]
Rubber comes to the screen, so it's a little obtrusive. I feel like I'm going to blow up if I try not to cover the screen, so it's best not to worry about it!
How did it compare to other products?
I used a folder type before, but it was often difficult to see because sunlight was reflected.
View detail
I'm using it as a replacement for the old model.
With the purchase of a new mobile phone, this one was replaced as well.
I use it on the Far Way P30pro, but it is ExactlySize with an extended arm.
VerticalQuantity:2pc, Horizontal Quantity:Firmly pinned in with 2pc claws, so my phone has never flown off while driving, including the older products.
It's cheap-looking plastic, but it's strong and won't fail.
The whole MODEL must have been used for almost 8 years...
Again, I expect it to last a long time.
View detail
Smartphone Mount's Cosma Balance
We also supply Daytona with the MiKnowla Smartphone Holder on an OEM basis, but we dared to choose MiKnowla.
It is sometimes cheaper to buy from the MiKnowla Brand in the first place.
For mounting on a Motorcycle, I prefer to use the reliable Gold genus.
It is said that the smartphone Mount part is a highly durable resin. Indeed, there is no fading or deterioration of UV light even if you leave it on for about two years and operate it.
Phones are expensive and you can't drop them. If you're going to buy one, it's best to buy Bestseller.
View detail
Replacing the old product
I bought it when I changed from iPhone 7 to iPhone 11 and the old one didn't work.
If you use the lower extension Arm in the instruction manual, you can't press the iPhone11's side Button, so I extended the Slide type Arm. But this is not reliable. I am worried about its strength. The screw is put in from reverse side, but it is a plus screw and it has a hard time to tighten. A hexagon screw is better. I used the extension Arm on the upper side.
I'm hoping for this one as well, as the old one was wonderfully durable, but I'm afraid the Arm is going to break.
I look forward to the development of new products.
View detail
It would have been even better if you could adjust it without tools.
This seems cheap and solid for now, since I use my phone as Navigation. I chose this product. The smartphone holder has evolved in recent years, and the Mount is less noticeable There are now SMART ones and even ones that are integrated with the Charger.
I don't want to attach something to my phone Body and at the very least, I don't want my phone to fall out. In terms of conditions, I chose this product because it was able to keep my phone down from four directions and the price was relatively low.
The product you received is divided into a number of Parts that need to be assembled, but the tools you need are It's included, so even if you don't have tools, you'll have no problem assembling it.
However, you'll also need a Hexagonal Wrench to adjust and rotate the angle, so you'll need a tool-free It would have been better if the angle could be easily adjusted. Once the angle is set, it's not that important, I think.
Also, the mounting method is a buckle type, so if you want to use it for other motorcycles, you can use the tool It is easy to install without. I ride multiple Motorcycles, so this place comes in handy.
View detail
Good stuff
I bought this product to secure my phone to my Motorcycle and it's a DAYTONA It is used in combination with the HandlebarStem hole-insertion type Mount bar It is
I've never used any other brand of smartphone holder, so I can't compare, but I'm not happy with it There is no point
View detail
Quantity in low position:Phone Holder that can be set
I want to buy a smartphone holder that fits the Mount bar!
The conditions of purchase are
The lowest Quantity for the Holder:Installation like Set
Holder with free orientation to Bracket
I was looking for these conditions and this is what I found!
The other imprints said it could be installed securely
The fact that it had a good rating also encouraged me to buy it
When you first open the package, the Holder is a little smallish
the i-phoneXR is the Quantity:I don't think you can set it
But if you read the Instruction Manual carefully, you will see that
By replacing the One Side with an Exclusive Bracket
I'm relieved to know that I can handle it
The result of the installation
BoltQuantity:Easy to install, just tighten the 2pc
It's very stable Low Quantity:Is it because it's set?
You can check it by glancing at it while driving as Smartphone Navigation
I've got a readout, sir
The auxiliary band with silicon rubber is also a point of reassurance
The only downside
Is it that you can't handle a sudden rainstorm?
This is a low Quantity:Doesn't interfere with the Meter you want to set
I know it's against the grain, but it's not true
Well, when the weather is questionable, you can QUANTITY your phone:Don't set it
We'll just have to be careful
View detail
No complaints
I'm using it with Daytona's Holder No rattles, and it is very reliable
I've used it to measure lap time on my phone, and it's no problem with vibration and wind pressure at 200K+ It was
My strongest concern is that the Lever for Release is not good for dirt or removing the phone Sometimes it takes a lot of work …
View detail
Used with yzf-r25
Purchased with KIJIMA 's Handlebar Mount Bracket intended for use.
Sumaho uses Expert Rearxz 1 in landscape orientation
Because I wanted to get to Top Bridge as much as possible
I chose this instead of DAYTONA
L-shaped connection Parts (Silver color part) Using it will completely close the keyhole
I got it, but attached to Bracket without connecting Parts
There is no problem with fixation of the smart head and making details
View detail
5 years ago favorite
It is the second time to use the Smartphone Holder of My KnowLa. Because the first one was a one-touch type, I bought a thing that was not a one-touch expression this time because my favorite thing was stolen.
Although I have been exposed to rain breeze for about 3 years since I began using this 2nd item, there are no wobbles in the feeling of use although there are some wobble.
View detail
Very good Holder
Excellent smartphone holder. I tried to fit into it a large navigator with the specified dimensions. In principle, it fit nicely into the holder, but I think that it will nevertheless be more suitable for a smartphone. Excellent build! View detail
Used in Dorareko
Purchase wish to use smartphones in Doreco.
The first condition was Folder where Lens does not cover behind as purchase conditions.
Inexpensive and easy to install. It is pretty solid even after installation.
It is safe because the fall is prevented by Silicon rubber.
In the photograph, I installed it in reverse so that Lens comes out, but I use it without any problem.
View detail
Cost performance It is good.
Quantity : 2pc. It is a Repeater of Set eyes purchase. Although the part where the smartphone contacts is Plastic, Clamp and Screw parts are firmly made of Gold genus. I think Cost and quality are made well for Balance. Orientation, degree of freedom of angle is also high, I think that it is a good product if you do not mind even seeing it. View detail
I think it's good
We also have a few patch attaching patches, and we are happy that we can firmly fix the phone easily and securely. Removal is also a One-touch, is it a little troublesome installation? View detail