Reviews
It was saved.
I purchased a new Helmet.
I think it is LiNori that I don't have to buy the whole IncomeBody, but I felt it was a bit pricey.
View detail
It was saved.
I purchased a new Helmet.
It was quite helpful not to have to buy the entire IncomeBody.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Match for American motorcycle!
Installed on Shovel 1977.
I thought that Smartphone Holder on American motorcycle is not basic MATCH,
We chose this product because we felt it was absolutely necessary when touring.
Since the Clamp portion is Silver, we feel that it is a good visual match with the Handlebar.
Overall texture is good.
However, since the holder part is plastic, I think it might break off due to UV rays and age-related deterioration if the motorcycle is parked in the blue sky.
A Hexagonal Wrench is also included for installation without tools.
It also has a Band to prevent falling.
I think the question now is how long it will last with Shovel's Engine heartbeat.
View detail
To replace the Helmet on DT-E1.
Purchased Wiring and Speaker to mount on two different Helmets.
Only the Body can be replaced, which is more convenient.
View detail
swinging direction
Quantity:Pair (for Left and Right) It can swing in one direction but not up and down.
You have to loosen the Clamp part every time and adjust it.:2pc. SetGen.
The texture and quality are perfect.
View detail
To the self-satisfied immeChain.
Not in terms of performance, but for FashionStyle's self-satisfaction!
It's a regular plastic frame, so you might expect it to be a little cheaper, but it's moodUp??'sItems.
The exchange procedure is not that difficult.
It can be easily removed by inserting a flat object such as a slotted screwdriver and connecting it, but I think that a plastic spatula can be used for recommendation without damaging the body, rather than a gold driver.
View detail
Silicon's Band.
When I noticed it was gone, I bought it.
Well, it's okay if you don't have it.
I bought it because it is insurance-like.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
It didn't come with just this.
This and the Mount Kit are required.
In total, I think the cosmetics are nowhere near as good as the Gold amount.
View detail
The extent of the earthquake resistance effect is unknown. The anxiety reduction effect may be higher.
Purchased for a phone mounted on Motorcycle.
Installation is easy, but requires separate tools.
However, this is not a problem since we believe that those who purchased this product have already purchased the Smartphone HolderWide sold by the company.
Tools are included with Smartphone HolderWide.
Installation is simple, just attach it between the Smartphone HolderWide.
Even if you are not familiar with the process, the work takes about 20 minutes.
As for the key effect, I can't say for sure.
When driving without the phone installed, there was a rattling sound from the Arm on both SIDES due to vibration, but even with this installed, the rattling sound is still the same.
There is no data to show any tangible effect, so it is just a feel-good insurance policy.
However, installing this one raises the height, so the phone screen is closer to the screen and easier to see (laughs).
The price is not cheap, but it is possible to take the plunge for a smartphone.
View detail
Anti-vibration measures for smartphones
I have not experienced any damage to my phone due to vibrations from the Motorcycle, so I don't know how effective it is, but I bought it for the peace of mind it gives me. View detail
I think it's a little more Compact.
Since I fucking wrote in the last Stubby-less 3 that the retrofitted Stubby was too fucking long and lame, I felt somewhat responsible to buy this improved version.
This time, I put it on my MATE90, but without my iPhone12, which is not broken, and still with Camera's broken 11 camera shake function for Navigation. So I don't know if it is effective in preventing breakage or not, but I trust the retention power of the 3 large camera for the time being.
Trouble with the previous 3 was that after about 10,000 km on the Gucci, the Screw inside the Stubby loosened and the Holder wobbled so much that the phone fell off. I guess if I apply Screw lock agent here, it would be perfect.
I don't do that Rubber and there is no sign of falling off. It's amazing.
Three stars because of the price, but four stars for features and looks! Thank you DAYTONA!
View detail
I'm not sure.
I am not sure if it is effective. I think it would not hurt to wear it for the time being. However, the height increases a lot when it is worn. View detail
… It's subtle.
The dimensions, machining accuracy, and practicality are solid, but … to be honest. Parenthesis bad." It is. (Personal opinion.)
I mounted the clock etc. for now, but it is far from the Bridge-like Image of the Off car, to be honest. I'm fucked." The feeling is strong.
Mount bar for low-cost use." If you are looking for a good product, Camouflage may be a good product for you.
View detail
Just give me what I want at Rose~!
"I bought this because the Tape on the Microphone was peeling off.
Nothing wrong with the quality.
One thing that bothers me is the price, since everything is all-in-one, including the anti-slip of the Body and the fixed Seal of the Speaker.
It is a Kit with poor performance for a Situation like mine, where I only want the Microphone part.
I know it's not SDGs, but I don't think it's a sustainable Parts supply that can be used for a long time, and I would like to see it available at RoseRose. "
View detail
The quality is good, but it broke after a little over a year.
I liked the quality of the product, but when I tried to remove it while touring, it suddenly broke and the parts flew off and hit the tank with considerable force. It seemed to be almost undamaged, but I felt quite dented.
It is a little over a year old and the damage is a bummer. The damaged part was in a place where there are no replacement parts, fortunately it didn't go while driving.
I would like to see improvements in the key part that holds the phone, increase the strength, etc.
We had no choice but to immediately purchase another company's product.
It is a pity because the product is well made.
View detail
Purchased for different use of Helmet.
I bought the Helmet without Speaker because of the different use of the Helmet and the lack of a recess for Speaker on the Helmet.
The shape of the helmet causes the base to float, so it is not attached and used as a clip stop.
The price of the Base and Speaker is quite expensive, so I think it is expensive considering the cost performance. Also, DAYTONA's Income has a variety of repair kits, so I think this is a good point.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Tank Bag" Interference
The orientation can only be changed horizontally.
kaedear ( KaEdia ) Motorcycle Multi Bar Clamp Bar Bracket Handlebar Phone Holder Long Bar Diameter 22mm Installation 32.0/25.4/22.0 KDR-H4-3-BLACK (Black)
When
VibrationControlDevice Seismic Spacer for Smartphone Holder3
To
If combined, it avoids interference with Tank Bag.
https://www.amazon.co.jp/gp/product/B09NR1CJ7H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
https://www.webike.net/sd/24965608/
View detail
Mounting angle
https://www.webike.net/sd/21956322/
It will be possible to orient the HolderBody at a right angle to the prop of DAYTONA's Smartphone Holder Wide for Motorcycle.
I realize that there is a slight seismic isolation effect.
The same product may be slightly less necessary for the Small TypeScooter, which requires a Mirror mount bar, as I believe it also has a bit of seismic isolation in itself.
View detail
For RearCamera, a driverless camera
I was looking for one for my RearCamera for my DoraRecco and found it.
I am very satisfied with the large size of the product, which is securely fastened to the Fixing Screw of the License Plate without any fear of falling off.
View detail
Made by stable DAYTONA
Easy to install, good material quality. View detail