Reviews
People who are using Navigation as a smartphone are sure to come!
It is enough to fix this product to Motorcycle and use the smartphone as Navigation.
A Rubber like a string on a Right of a product introduction photo is a Point, it rotates slightly when fixing a smartphone, but if you attach a Rubber and fix a smartphone it will not move.
Depending on Motorcycle, MT-07 has vibrations when doodo doodo accelerates at 2000 to 3000 rpm, and the fixed smartphone vibrates in burst.
By the way, the used smartphone is ASUS ZenFone Selfie.
Large It is durable even for a smart smartphone..
The only thing you want to be aware of when installing is Nut's Size is 11.
And if it is Spanner it is difficult to tighten. I think that it can not be tightened with Glasses. Socket is also not allowed (However, it is possible with thin meat Socket).
View detail
Short is useful
Ram Mount MirrorFrame base Used in combination with 11 mm hole RAM-B-252U
One size long amplifies the vibration of Motorcycle and it is unsuitable for me who fixes ActionCam.
I chose Short to minimize vibration.
Still it will be the video that picked up the vibration, but it is acceptable range.
People who want to finish with a low budget will have no choice other than this.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Required for ActionCam Items
There is no space around MT-07 Handlebar.
It is this product to appear there.
It fixes in a form to let it pass through the Bolt part of Mirror.
Well, not only Mirror but also other places.
I am using it to fix ActionCam
View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
Required for MT-07 Items
There is no space around MT-07 Meter.
If you are attaching a ram mount, you have one point in MeterLeft Side.
There I am attaching a USB power supply so there is no space to install a ram mount.
So, this is the appearance of this product.
It will solve the problem at a stretch.
It is up to you what you fix on the bar!
View detail
Truly Exclusive Design!
There is only the vehicle type Exclusive Design and it can be worn without any sense of incongruity. As the width is also secured, I like the point that it does not become cramped even if I install a smart mount or power port around Handlebar.
Just replace the OEM Screw and install it. Let's wear those who use the R25 for Touring!
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
Separate handle Motorcycle is a perfect product.
Large thickness adopted by most domestic Motorcycle, the Large body Attachment will be usable at this.
I am very satisfied with the color around my Handorbar of my Motorcycle painted with matte black. However, when it is a little longer, I feel that something more Attachment can be attached.
View detail
Refreshing around Handlebar
Until now, I was wearing an ETC receiver with my own Stay, but other switches and so on also increased, and the surroundings of Handlebar got stupid. Refreshed by using this product. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Touring Required Items
The trigger to purchase this product is that the previous MINOURA Smartphone Holder vibrated, the Screw part was loose, and the Body dropped out. Although it is DAYTONASmartphone Holder, I think that it is safe to build in as exclusively for Motorcycle supplies. Although we ride on YZF - R1, since the vibration is not hampered, it is impossible to understand that Screw of Smartphone Holder made by MINOURA loosens.
However, the DAYTONASmartphone Holder can withstand strong vibration. In the first place Smartphone Holder made by MINOURA thinks that it is highly recognized as a bicycle Holder, but DAYTONASmartphone Holder is also function and looks good on the appearance.
Try using Hold feeling, visibility, ease of desorption are top class even compared to other Manufacturer. The primary purpose of use is Navigation. Next time you use ActionCam with the smartphone apple.
Extremely convenient. It is a product that you can buy and be relieved.
View detail
Purchased because I wanted to attach to Front fork
Since the space between Front fork and Cowl with Meter is wide, I fixed it under the top bridge of Fork and installed it in HandlebarCenter with key lifted. The smart fixation place is also easy to see and it is totally inconspicuous when only using Clamp when not using it. View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
I can firmly fix it.
I am using it with ninja 250. You can fix it directly to Handlebar without using Mount Kit. The angle is exactly easy to see.
I used iPhones 5 and 6 with no Cover, but in any case I firmly hold it firmly without any anxiety. Just think that the attached Rubber should be used firmly.
Since the attached Rubber is not fixed to Body, there is worry about losing it
I pasted it on the back of Body with Small Sana Pipe's Tape and fixed it to Body by passing that Pipe. It became a nice feeling that there was no need to worry about easily removing it.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Smartphone Holder
I was thinking that I want Smartphone Holder and I was proceeding with my friend and purchasing it.
It is attached to the Handlebar Brace without attaching it to Handlebar.
I made it detachable because I did not want to mess around with Meter.
Although it is possible to install it with the attached Vinyl sheet, it is troublesome to overlay the Vinyl sheet one by one at the time of desorption, so I bought a suitable transparent Hose at Home center and used it.
Easy detaching of the smartphone, detaching Holder.
It feels like there is no need to worry about falling even while driving.
You can mount either vertically or horizontally Large fun convenient.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Classic
A classic in the classic among myself. Motorcycle has increased so I bought it. I heard the rumor that the Clip formula suddenly comes off, so I avoid it. The Silicon band feels as insurable and it is as good as Body. View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
This is good!
I used Case type Smartphone Holder? Case? Of Nanhai parts so far, but in the summer the smartphone overheat and because the covering Seat was reflected and it was hard to see, I was considering purchasing the OpeningAir type.
It also boosted the purchase that happened to be sold at a bargain.
Sumaho is the Waterproof Specification, if it rains it will not cause any problem if you disconnect the charge Cable. (^o^) /
Although it was a Quick release type, it was necessary to tighten Guigui with Bolt in order to install it so that it would not move, then the Quick Release became stubborn and could not be unlocked, and consequently it was difficult to fix it as a fixed type Or, it has no meaning Spec. was. (^_^;)
Others was very simple, just adjusting the angle to fit your preference or positioning.
Attachment of the Holder part can adjust the angle fairly, and so that the angle does not change arbitrarily, consideration is also taken place where it is shaped like bevel GEAR!
Parts matching the Large size of the smartphone are also included, but I think that it can be used as it is in most smartphones without replacing.
It is an impression of trying it, but this is good ~! (^o^) /
Just lock in with the Holder of both SIDE.
Safety if hooked by unexpected drop-off Silicon rubber.
Removing, when you unlock the locking and Holder open, you can remove the smartphone.
The price is about 2,000 yen at bargain sale!
Originally it is about 4,000 yen.
If you are interested in reading this impress, buy with Webike! Immediately while stock is in stock! (^m^)
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
What to put on it now
Since Navigation made T Brett in Tank Bag, I would like to attach ETC? And Drive Recorder.
I fixed it appropriately with Bolt and Rubber, but I could securely fix using the dedicated mounting Mount Kit.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
For smartphone installation
ADDRESS110 (CE47A) I want to attach a smartphone to
I bought this.
Following the Instruction Manual, we installed it so that it will be sandwiched between Mirror's mounting Bolt and completed in about 20 minutes.
I also think that it is quite good as making it is solid.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Smartphone Holder
DAYTONASmartphone Holder
I am very satisfied with just a good Size
However, iPhone can not charge with 1A output, it will decrease more and more
It is saved without being mistaken if there is notation clearly written.
It is a replacement for 2A output.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Smartphone Holder
I wanted to install a smartphone as a navigation in Motorcycle I was looking for Smartphone Holder
The value stretches but it is robust and the Instruction Manual is also polite
Do not you fall off, though?
It seems that Silicon rubber for falling prevention is integrated with the Smartphone Holder and it leads to remarkable dropout prevention
How to look for a Smartphone Holder Inexpensive things may be acceptable, but it is late after dropping it ~
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
DAYTONAClamp
I bought it with Smartphone Holder of DAYTONA
This is DAYTONAClamp
As M8M10Universal it seems to be installed in any Motorcycle
It is Recommendation for not installing Small Type Navigation and Smartphone Holder even if you want to install it on Handlebar
Recommended because the price is cheap and sturdy
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
DAYTONADAYTONA Smartphone Holder for MotorcycleWID
I changed my Handlebar this time and I bought a Smartphone Holder of my wish. There are various Manufacturers, but my smartphone is an iPhone 6 Plus, so when you narrow it down to a certain extent, it is easy to remove and made by DAYTONA which you can also purchase Repair Parts. Extension Bracket for 6 Plus is quite long so be careful if you do not care.
(It has broken soon) Other than that it's easy to remove from Handlebar so I think it's a good item.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Specialized in Quick Release.
I use ipodtouch for Camera Control, but I introduced it for fixing. Before I got this item, I tried to use the all-plastic one, but it was extremely hard to use, it was painful, so I replaced it.
The attachment angle also depends on the orientation of the terminal (Lengthwise and crosswise) Is also free.
It was Quick Release function that I was impressed with the product. Put the terminal on Parts of Photo Left, with Guide on both sides "Cha Chi Chi" I pinched it, but when pulling the Red Lever on the back, the tightening is released at once. (One-touch removal)
Just HandlebarMounting Hardware (On photo Right) Easy to remove with Buckle formula. On the contrary, I am worried about theft.
View detail