Reviews
For those who don't want to stand out with SimpleStyle
There are many different Smartphone Holders, but I think this product is the most discreet and easy to install.
In fact, it is so close to the Top Bridge that its presence can be eliminated.
If you want visibility, you can choose a Type to attach to the Handlebar.
Installation on the Holder is simply a 90-degrees rotation to fit the groove.
It will not loosen or fall off.
Satisfactory product
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 50, HONDA Cross Cub 50, HONDA cross-cub 110
Mount bar for CROSS CUB
I found this product when I was looking for a mount bar to attach additional meters.
Since the installation was requested by the Shop, the details of the installation method are unknown, but it appeared that the Meter panel was removed and this product was co-tightened using the included Bolt.
The bar is now in a position that is very easy to see when driving.
Attached to the bar is an iPRO ShiftIndicatorAPH8 Red ・ SP MukawaΦ48Small DN Tachometer 12500rpm (with Rev indicator) ・ NeoFACTORY48mm Voltage Meter White Panel Stainless
When installed at the same time as the KITACO Neck Cover, modification is required for either one of them due to interference. (Modification of the Neck Cover is recommended.)
View detail
No worry about falling off.
There is no sign at all that the 120km/h section of the New Tokyo-Nagoya, the Decoration bumpy road, or anywhere else you might fall off.
Vibration absorption capacity is also very high.
I have tried a few and they are by far the most secure in preventing drops, and if you are really worried, you can easily lock it with Lever.
It is very easy to use as it is easy to connect Charger.
The only complaint I have is that it is difficult to clean because dust tends to accumulate in the groove where it is fitted.
Also, some people have a problem with the way it looks. (Depending on Motorcycle) It may seem a bit lumpy.
View detail
Can be used with ZETAHand guard
It is the same φ22.2mm as the Handlebar, and I purchased it to install a Smartphone Holder and a radio-controlled watch. I was a little worried that it might interfere with the ZETA hand guard I bought with the CT110 HUNTER CUB, but it was the same manufacturer and I was able to install it easily without any interference at all. Installation was done with just one HexWrench. After the installation, there is no rattling at all, so it seems to be useful for reinforcing the rigidity of the handlebar a little.
I am happy with the Handlebar because it is less cluttered around the Handlebar and is more Refreshing than I expected. I don't need anything else near WITH Handle other than these three. (USB power supply is already secured at another location) So, this is sufficient in terms of capacity. If I replace it with a Multimeter with a clock, I'll be more Refreshing, since I won't need a radio clock.
View detail
Good multi bar!!
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: Others
Mounted on CUB 110cc Crank bar
We replaced the Rubber part of Crank Bar's Smartphone Holder with this one.
When I run, the phone is still vibrating in Small increments due to vibration. I'm not sure how much the vibration is reduced, but I think it's good for preventing breakdowns.
View detail
It is quite good.
Although it takes 60 seconds to establish the connection due to the Radio Law, this product uses a soft power supply that shuts down 5 seconds after the ACC power is disconnected, so even if your car model shuts down the ACC power at the time of cell start, as seen in BMW etc., the power will not be turned off when the engine starts. Therefore, if you put on the Helmet and Gloves after turning on the key first, you will be connected to your smartphone by the time you step over and turn on the Cell, and you will not feel the stress of waiting for the connection.
If your vehicle is equipped with a 12~16mm GPS Mount Bracket, the Tanax AIO-5 Mounting Bracket can be used without modification.
The cost performance is great, but the screen size of 4.5-inches is a little insufficient.
View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail
Circuit Running
I want to measure lap time in Circuit.
Purchased
I still need to know where to install the Sensor part and Wiring.
It was Large strange to pull it in.
We will verify if Time can actually be picked up properly.
View detail
Used as Bracket for Switch on Grip heater
The Bracket that was originally attached was too long and was bent at the Prank, breaking it off at the base.
This time, I don't think it will be tampered with because the base LARGE size and height of the base are just right and not uncomfortable.
View detail
Large sturdy even on Motorcycle as it is firmly fixed.
I use it on my Insta360 X3. (I'm planning to buy Ace soon, so I'll use it there as well.)
With X3, the position is so delicate that it just hits the chin of the full face, so I think other ActionCamera would have no problem at all,
The Camera is easy to put on and take off, and since it has two clasps, the Camera will not be upside down as is often the case with products that hang from the neck.
The fact that it is an official Insta360 product is also a reassuring factor.
It can be used for walking around town or in the mountains, except for motorcycle, and since the price is only 3,000 yen, one can be used for various situations and is very cost effective.
View detail
cc110 smart phone device
It is integrated with the windshield.
Good safety features as it is in an easy-to-see position.
View detail
I lost it, so...
22.I lost my ClampSpacer for 2mm, so I bought Repair Parts.
Only Repair Parts can be purchased for fragile parts, so they can be used for a long time.
View detail
Because it is small, it does not interfere with the Meter and Handlebar area, but the map is also small in its own way.
Other companies have similar products, but I was bitten by the fact that it was a new product. I purchased this product without considering the size of the screen, but it is rather small. When I installed it, it did not interfere with the Meter or other devices, which was probably a good thing,
The large size of the map is the same as that of a smartphone, which is hard on the eyes of an old person, but the instructions are only rough, so you have to learn to use it by hand. Except for the Motorcycle Rose, Wiring is not difficult to install with the color-coded connectors. However, since the Camera connector is the same color for front and rear, it is recommended to temporarily turn on the power during the installation (since the Camera in the back has a reversing function). If you do not use your motorcycle frequently, it is recommended that you connect the ACC and the constant power to ACC separately. If you do not use your motorcycle often, it is better to use only the ACC connection for constant and ACC. I put a switch in the middle of the ACC power supply because the power comes on even when it is not in use. At first I thought the Touch screen response was sluggish, but with my bare hands it was fine, and in my experience it was sluggish with Gloves, but with Gloves, which does not support smartphones, the movement was better. However, the buttons are small enough to fit the screen, so you may end up pressing the one next to it. There is no automatic screen illumination adjustment (I always set it to max except at night. You can set the screen to nighttime, but it's a bit of a hassle). The position of the HomeButton on the map screen is annoying (it can be moved temporarily).
View detail
It can be used with a turnstile.
I bought this to attach my old Porch and Smartphone Case to my Scooter.
As others have stated in their reviews, it rotates when installing the Porch and other parts.
I solved the problem by adding a Nut to stop the loosening.
Because of its high quality, the appearance of the product without Porch and other products is not bad.
View detail
Easy to use
[How is it used?
I chose to install a new Smartphone Holder on my TouringMotorcycle and ultimately ended up with this product.
Anything as long as it's cheap!" I am very happy to be able to do this, And not too much of Plastic's cheap stuff, either." For me, I'm a bit of an either/or kind of guy. That's it! It seemed like a good idea.
Also, my phone has many buttons on the Right side, so I could not use the type that is inserted from the side, so I chose the type that is fixed at the four corners.
Was the one you received as per Image?
I chose Black and it was just like the Image.
How was your experience with it?
First of all, the Included Parts:are substantial for the price.
There is a diameter conversion rubberretc.Pattern and it is not difficult to install.
When the middle Button is pressed, the four corners are Fit to the phone.
Release is Quantity:Pair (for Left and Right) The only thing you need to do is to press the "+" and "-" prongs, so everything can be done with one hand while doing Gloves, which is easy.
[Points to note]
Make sure it is firmly secured before starting.
How did it compare to other products?
I had been using Chinese several hundred yen ones, but I felt they were well thought out with good strength and ease of use.
【Review】
I used to think that KaEdia was cheap or bad, but when I bought it this time, I got a good impression of Included Parts:, usability, etc.
As a smartphone mount, I have no complaints.
View detail
Easy.
Large is just right.
I change equipment from time to time, and it is useful because I can exchange it easily.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
On Stem Mount
[How is it used?
GSX-R600 (K6) I purchased this product to install DAYTONA's Multi Bar on my
The compatibility list said that the model year was 2008 or later, but I measured the diameter on the actual vehicle and confirmed that there was no problem, so I chose this model.
Was the one you received as per Image?
I had bought other Sizes before, so it was as per Image.
How was your experience with it?
I confirmed beforehand that Size was fine, so of course I could use it.
Simply put it through the Mount on the Multi Bar, put it in the Stem Nut, and then tighten the Bolt.
Multi Bar could be fixed Firmly.
[Points to note]
It is recommended to measure the diameter of your motorcycle in advance as well as the fit.
How did it compare to other products?
I chose DAYTONA because it was troublesome to check the compatibility with Multi Bar or the hole diameter, etc.
Depending on the price, a cheap No Brand product would be fine.
【Review】
You can easily fix the Multi Bar to the Stem.
It is recommended to measure the inside diameter of your car's Stem to be sure.
View detail
Touch screen is slow to respond. Instruction Manual is too easy.
The instruction manual only describes it roughly, so you have to learn how to use it by hand. Except for disassembling the bike, wiring is not difficult with color-coded connectors. However, since the connectors for the front and rear cameras are the same color, it is recommended to temporarily turn on the power in the middle of the installation (since the rear camera has a reversing function). If you are concerned about the dark current, the instructions say to connect both ACC and constant power to ACC, but I connected ACC and constant separately because I was concerned about the inability to use the parking monitoring function and the time gap. If you use your motorcycle infrequently and are concerned about battery drain, it is better to use only the ACC connection for constant and ACC. As mentioned in the title, the response of the touch screen is sluggish. It is frustrating with gloves on. There is no automatic screen illumination adjustment (I always use max except at night). The smartphone app is supposed to be able to connect to the driver's recorder, but I don't know the password, so I still can't use it. The home button on the map screen is annoying. View detail