Reviews
It's not cost effective
The sound quality of the music was so good that I hooked it up with a friend who has the same
Sound quality like old radio.
The good thing is that it is easy to operate even with winter gloves.
Battery life lasts well even when riding all day.
The bad part is that I can't hear conversations at high speeds, and the calls often cut out. When it is bad, it cuts out after about 10 minutes.
Kit and other items for repair are sold, but they are expensive.
View detail
Lens is slender. 6 months OR distortion or condensation when driving on roads with temperature differences.
When you cross the Hakone Pass on Route 1, the condensation orLens is distorted.
The first time I was able to get an initial response, but it happened three times in a row.
Just passing through Hakone Pass on Route 1 or near Ashikaga SA on the Tomei Expressway on a day when there is some temperature difference can break it.
It is vulnerable to condensation and should not be bought.
If it is only for town driving and mainly driven in places where the temperature does not change much, it may be Large sturdy.
View detail
late delivery
Delivery date is 3 days later than when the order was placed.
There is also no CanCell button listed in the Cancellation method.
I will never buy from this Site again.
View detail
You should buy a DAYTONA conversion Spacer.
I think the outer circumference is Cut-out accurate.
However, the edge surface is gouged and anodized without Edge treatment, so it is dirty.
Also, the holes for the fixed bolt are off-center and do not make a nice circle when combined.
In addition, since a thin Screw is cut directly into the aluminum, it will almost certainly lick if you try to tighten it to the point where it will not rotate.
I would much rather buy a Daytona Φ13Pipe conversion ClampSpacer (https://www.webike.net/sd/23697712/) than buy this. This is just an expensive Garbage. The proper price would be about 1500 yen.
View detail
Could it be a little more Compact?
Last August, before this product came out, I installed the 3 on a CUB90 and used it with an iPhone 11. After about an hour of driving on a mountain pass (naturally with a CUB, driving at full throttle), the camera's image stabilization function completely died. I immediately replaced it with an iPhone 12, but I couldn't bring myself to use the 3 and left it alone for a while. This March, I bought this unit and am using it on my MOTO GUZZI v7 as a trial. The 3 is bulky to begin with, but now it's even bigger and looks like a waste before it's effective. I don't know about the effect on the Camera function, and I don't want to try it. Now, the body is shaking more than before, but the visibility of Navigationetc. is not a problem. I think it is possible to continue to use the iPhone11, which has a broken Camera 3 that is originally very easy to use, if only for Navigation. I am eagerly awaiting the release of a new compact model that incorporates this functionality. Good luck, DAYTONA! View detail
Too Thin, Too Shaky
Bought this as an aesthetically pleasing option for mounting a phone to my Super Cub. However, it was insanely unstable. The bar never stopped vibrating such that it was impossbile to interact with the phone and visible cracking began to form quickly on the welds. The cantielver is just too large off the mounting points and the metal is too thin. Avoid it at all costs. View detail
It stopped turning on within six months of purchase.
It stopped turning on within six months of purchase.
The Instruction Manual reads.
There is a case that the terminal is deformed by putting in and out of the battery etc. ~"
But if the terminal is bent by inserting and removing the battery...
It's no good, isn't it?
And I'd set the Speaker cable to Antennas on FMRadio.
I wonder if I can run the Cable out of the Helmet?
View detail
Is it really Large sturdy?
There is a gap between the Attachment on the back of the Case and the Locking Parts, and it is rattling.
I checked with Mr. Terasawa at the DAYTONA Customer Service Center. "Strength wise, no problem!" It was a single point of view.
With all this rattling around, I'm worried that it will be damaged while driving or that the vibration will break the Smartphone.
View detail
attachment
It's pricey, but the grooves in the included Bolt are too shallow to bite and hold it securely in place. View detail
Salt response to initial defects
While there is also the product of the Fat Manufacturer of about 10,000 Yen, in order not to be troubled with the thing which does not function in the case of emergency, I dare to choose DriveRecorder of EduRans which is not cheap.
Before installing it in the vehicle, I checked on my desk to see if it worked properly and found that the Rear image was distorted and the recording was also recorded in a distorted manner.
I put the product back in the box and asked to return it, but was informed that they could not respond unless they could confirm the symptoms through inspection.
I reassembled it on my desk and turned it on again, assuming that I would have to prove the symptoms later, and the same symptoms appeared.
In addition, in the second verification, the disturbed Rear image was displayed in Red color.
Document the symptoms with photos and video and send the goods back for inspection, which the Manufacturer says will be done.
One or two weeks later, the manufacturer informs me that they cannot accept the return of the product because they cannot see any symptoms and that they will send the product back in its current condition.
The Button is also hard to push, and it is a product that I lost interest in installing in the vehicle. I wrote this so that the number of riders who feel the same way will not increase.
If you are referring to our products, we recommend that you select them after careful consideration because there are products of other manufacturers in the same price range.
View detail
Cannot be installed. Cannot be used.
After I received the product, I tried to install it at a later date, but I don't know if there are different screws in the parts or what, but anyway, the screws are not tightened or fixed. The screw keeps turning. When I looked at it carefully, I found that there were only 4 screws in it and no parts to fix it, and there were only holes in the body.
What's going on?
View detail
Earphone is too thick.
The EarphoneBody is so thick that it hurts my ears and I can't even wear it for a minute.
If it was designed for a motorcycle helmet, I wonder what kind of helmet it was designed for.
I thought I would have to remove the back cover to make it thinner but that didn't happen and it was a waste of money.
If you're not going to buy this, you're better off buying an obscure Chinese thingy from Amazon.
View detail
It was a mistake.
The speaker is too large and too thick, and it hurts my ears.
The purchase was a mistake.
View detail
I can't use it.
As soon as the product arrived, it did not receive GPS, so I had to return it to the Manufacturer for investigation.
It came back with no abnormality, but this time, the Display display was not used at all.
It went crazy like the picture. It is totally unusable.
I would like to return it.
View detail
I want to Cancelation.
I want to Cancellation this product only. View detail
I need more child parts.
Nut is not enough…
Made in Germany is not like this.
View detail
Inspection results show that the product is good.
It rotates when I mount Smartphone though there was it in Review of other people when I actually used it. It occurred even in the situation that it did not start yet immediately after installation. There was no such phenomenon when I checked the actual product at the motorcycle goods store nearby. Therefore, I asked them to inspect it. However, the result of the inspection was that it was a good product. In the end, I was told that my combination was bad. All of the parts are from the same manufacturer and the tightness of the arm is subjective, but I think it is Level without a problem. This product was originally designed to hold a smartphone in place, but it doesn't fulfill that function, yet the seller insists it is a good product. I bought this product because of its high rating, but if you see this review, I suggest you don't buy it. View detail
Are you sure you're designing it right?
The body suddenly disappeared while driving, and I was saved because I had attached a wire to prevent the body from falling. It is a pity that it is only strong from Case and rain. View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It stops opening after about a year of use.
It is good immediately after buying it. The high rating on the other Reviews probably comes from the satisfaction right after installation.
The problem is the feeling of use after one year of installation.
This product, after about a year of continuous use, the RedLever on the back will stick and you won't be able to open and close it.
This product made by DAYTONA, the usability itself is very good, so I bought the same product again after I couldn't use it once, but I couldn't use that one either due to the same phenomenon after about 1 year of use.
Again, the usability itself is very good. I'm very disappointed because if I could use it all the time I would give it 5 stars without complaint.
View detail
Falling while driving
It's easy to install, but one month after I put it on, the screw came off while driving and the Smartphone Holder fell off.
I didn't tighten it because I thought it would still be Large strong.
The Smartphone Holder and Ram Mount were broken by a car stepping on them, and I am very scared to think that I would be wearing my phone.
This product can be used on BrakeReserve tank, but it is your own responsibility. Of course, you need to tighten the screw and use the screw lock agent.
I decided that I would never put myself in this place again.
The model is C650GT.
View detail