Reviews
For ETCBody protection
I had it installed at the shop at the same time as the ETCSetup and Body installation prior to delivery.
I thought the OEMOption would be sufficient for the quality of the product.
I am satisfied that it fits under Seat and Beauty.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
Fits: Others Master Cylinder Installation Pitch 30-32mm Vehicles
Easy to use!
I use the long one on the right and the short one on the left, and it is very convenient and does not get in the way. It is easy to forget to attach the collar when installing. View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
I've been looking all over and this is the one I like best!
During the installation of Antennas, which is required for ETC installation, the
I was looking for a good Bracket for my car because I couldn't install it directly on the body of the car.
There is a short Bracket from the Antennas mounting and the angle is Quantity:Pair (for Left and Right) The number of adjustments can be made to the
This Bracket can also be bent with force to get the angle you like.
Tie Wrap to stop Wiring (inHemp palmuck) and
It also comes with something to protect the Wiring from Antennas through under the Tank to under the Seat.
It is a well thought-out product.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
I think it's better to install ETC at the same time.
I had ETC installed at the same time when I bought the car, and I bought Porch at the same time as its Parts.
However, when I look at the wiring coming out of Porch, I think that it is necessary to take out the wiring from Porch before ETCWiring work. If you try to put the Body in the Porch later, the hole for taking out the Wiring will be wasted.
Since the body is fixed to the vehicle body with Magic tape, there is no need to worry about the body going out of control, so even though it is an invisible item, it is doing a good job.
View detail
Travel companion.
The ETC has become the Mast as long distance travel has increased and the use of highways has increased as it crosses prefectures.
I'm looking for a bracket that I can mount my ETC to. There are some cheap ones out there, but I wanted to make sure that it would last for a long time, and I wanted to have something that I could use if I had the chance to ride another motorcycle.
good point
It is easy to install.
The quality of the cover is good, so it is durable enough for outdoor use.
The Instruction Manual is very helpful and conscientious.
A bad point
None
If you want to use it for a long time, you really should use a proper tool like this. OEMAttachment-like products are preferable to external ones.
View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Heavy plate Bracket
The product was purchased for use in the serow250, which does not have storage space. The quality is good, but the plate is very heavy and big. So I'm only going to use the blancet separately. View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Just fit.
I installed the ETC under the Seat of REBEL, but I thought that the product of Y's Gear is good to fix and protect it. View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
I'd like to see you do something different.
I installed it in TouringSEROW. However, Dial lock is a little unreliable in two digits. In addition, because Base plate and Cover are not sealed, when I run in Dirt and rain, because mud enters to the inside, I try to clean it well every time. View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
Any location
Purchased to change the location of the ETC Antennas
Use the screw holes on the Meter Bracket instead of Mirror on the Handlebar This is installed inside the Fly Screen by the user
It is easy to install in places where it can be screwed together
View detail
ETCBody enters, meaning without entering Motorcycle
I thought it was expensive when it was a container, but purchased unexpectedly with MT-09 compliance.
First of all, if you do not let Wiring pass through the hole of Porch, you can not use it in the intended orientation of Manufacturer, so you should better prepare it before installing ETC.
It was MT - 09 in 2016, but since Porch does not enter the Accessory Case under Seat because it is Large rust, it can not be used.
Although I do not know whether it can secure Clearance on other Battery, but I quit because I feel like it will be broken under an ass in a mood way.
I believed the explanation and failed.
View detail
Fits: YAMAHA MT-09A TRACER, YAMAHA MT-09A, YAMAHA FJR1300AS/A 1MC8 1MCP 1MD3 1MD6
1 - And 2 is there?
This time this time "2" Why did you buy it?
Body's ETC 2. When I replaced it to 0
Large will be the same - - - I thought that
It does not fit a little longer - - -
That's it, it's for that size (Lol)
View detail
It is diverted to Mistuba MSC-BE 21
We diverted Antennas integral Mistuba MSC-BE 21 to theft.
Although it is not the original usage, the making is Well and it does not have any problem with Size, it is useful for avoiding theft and Prank's line of sight.
View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
A Touring SEROW is equipped. Unstable, probably because there are few crawler bearing areas, although the Indicator was attached to the Light-cowl upper part for the Antennas before at the circumference of a Meter. If it fixes to a Mount, it will be set
A Touring SEROW is equipped. Unstable, probably because there are few crawler bearing areas, although the Indicator was attached to the Light-cowl upper part for the Antennas before at the circumference of a Meter. If it fixes to a Mount, it will be settled with a Refreshing and a problem will be solved. View detail
Vehicles were purchased by the upper part of the body to which I had ETC attached, and the ETC Porch was purchased later. It is having to remove a Cowl once, in order for wiring to also make it already crawl on ETC in a Cowl, although there is
Vehicles were purchased by the upper part of the body to which I had ETC attached, and the ETC Porch was purchased later.
It is having to remove a Cowl once, in order for wiring to also make it already crawl on ETC in a Cowl, although there is a portion to which having noticed there lets wiring pass into a Porch.
.
If there is a person who thinks will attach a Porch to vehicles with a Cowl, we will recommend you to equip simultaneously with ETC.
View detail