Reviews
It can be installed on 24 years model without any problem.
When switching to the ZX-6R, I was considering where to mount the Smartphone Holder and USB power supply, and I chose either KITACO or WorldWalk's mounting bars. I chose the one from WorldWalk considering the possibility of installing an OEMSteering damper in the future.
Although there was no information on the compatibility of the Top Bridge with the 24 model, we compared images with the 23 model and decided that there would be no change in the Top Bridge.
View detail
HONDA LEAD125
The fit is perfect and perfect.
However, I am a little disappointed that Hexagonal Wrench is not included.
Those who do not have it need to prepare it separately.
Also, depending on how the bar is installed, it may be difficult to see the Meter device if it is placed in front of the bar, which may cause some inconvenience.
However, Smartphone HolderQuantity:Pair (for Left and Right) I am satisfied that there is quite a bit of room even when fixed at both ends.
I'm glad I bought it!
View detail
The product itself is good, but the details are not so good.
I thought it was a good product because it can be mounted parallel to the handlebar at any distance, so it does not get in the way, and it allows for a sufficient length of bar to be effectively used.
However, the attached washer is a little small in outer diameter and not thick enough, and I am concerned about its strength when attaching the bar to the plate that also comes with the washer.
On the flip side, I could say that the Slide hole in the bar is too wide.
View detail
Surprisingly time consuming to install.
The car model is Exclusive Design, so it can be installed without interference.
Ideally, I would have liked to install it a little lower, but that was unavoidable.
I'm replacing the OEM Handlebar Clamp Bolt with the supplied Bolt.
It would be appreciated if the Instruction Manual could include the tightening Torque of Bolt. (OEMBolt is 25N?m)
I have read other people's (J.P.P.'s) review of the Large odd useful installation instructions.
I had a hard time tightening it as shown in the third photo because the Hexagon socket I had was too short.
View detail
I like that you can change the length.
Mirror mount was the right choice because it is difficult to install Bracket around Handlebar.
The height makes it easy to see your phone.
I was concerned about the fixation force because it moved no matter how hard I squeezed it, but it seems to be Large sturdy for normal driving.
bar to theQuantity:Pair (for Left and Right) It would be nice to be able to change the length by moving it to
View detail
For Scooter Smartphone Holder
[How is it used?
I use my Scooter for commuting to work, and when I go to a different place, I thought it would be convenient to have a smartphone navigation system, so I was looking for a variety of attachments, etc. I found this product, which seemed cheap and easy to install, and bought it.
It is for PCX160, but I think it is possible to install a large body if it is a Scooter, such as a type that is co-tightened to Mirror.
Was the one you received as per Image?
The quality of the product itself is commensurate with the price.
How was your experience with it?
The screws on the Clamp that hold the Mount Bracket and bar together often loosen, so I think it would be more stable if they were tightened with a very high torque.
Then, I had to change the angle several times until I got it to the best position on my phone. It took time to find the right angle.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
It is easy to install.
Installation is extremely easy.
If the ETC Wiring is done properly, it can be installed in 10 minutes.
The dissatisfaction point is a little rattling because there is some rattling in the body and the lid part of Case.
I put it on my wife's Rebel, and I put Tape in the gap at the Level that I don't mind at all while driving.
The price is right for this type of product.
View detail
Wide space for installation
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
It is easy to position after temporarily fixing all parts
How was your experience with it?
Quantity at the front.:It is not suitable for those who frequently look at the phone because it is set and the line of sight is turned downward for safety.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not very classy.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Ideal for Two-Ring
Mobile Holder with Cigar socket
Convenient
View detail
It's a pimp!
When I replaced the Handlebar, the vibration was more than before. Since I have a Taper Handlebar, I couldn't use my old Handlebar, so I was looking for something better and found this product. I just installed it and haven't run it yet, so I don't know if it will reduce the vibration, but I will report back later. View detail
Fits: HONDA CB300R, HONDA CB150R, HONDA CB250R, HONDA CB125R
Used in CB250R
I installed it in Left Mirror part and it was easy to install by Bolt On. I installed Ricoh's Movie Camera here and used it instead of Drive Recorder at the time of driving. View detail
For Camera and Phone
To install after removing the front Brake and Clutch (Cover on DCT) attachment points It will be
Hexagonal wrenches allow for easy installation
View detail
It is very easy to see because it is on the Meter !!
Unlike Bracket attached to Handlebar, smartphone is very easy to see because it is on Meter.
I think that it is safer than having it in Handlebar because I can see the smartphone without noticeably diverting my eyes from the front.
Just Quantity : Pair (for Left and Right) Screw began to rust in a month. Since other parts are not rusted, only Screw is not rustproofed.
The price is a bit expensive.
4. I would appreciate selling it for about 5 thousand yen.
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
It's pretty good, but it's alright
The position of the bar is easy to see on the Meter, but I think that it can be a bit higher. I want you to be able to adjust by installing a plurality of mounting holes of the bar.
Good place to fix firmly in Exclusive Design is good.
Length of bar is short. Maybe it will be difficult to lengthen it as it hits Screen?
View detail