Reviews
It holds the phone securely in place.
[How is it used?
I purchased this product to use my phone as Navigation in Touring.
Was the one you received as per Image?
The ball joint of the mount was smaller than I expected.
Was the installation difficult?
There are only two types of Spacer for Handlebar Mounting, 22.2mm and 25.4mm, and my Handlebar is 28.6mm, so I went to Home center and bought a 2mm thick Elastic band and inserted it between the Handlebar and Clamp. Without Spacer, it was just right because it is compatible with 32mm.
A Hexagonal Wrench was also included and was easy to install. However, the Ball joint does not have much operating range front to back, so once I tried driving with the phone attached, I loosened the Bolt on the Mount once and adjusted the angle.
How was your experience with it?
Driving on public roads, the phone was firmly secured and did not sway with the vibration of the Engine.
[Was there anything that disappointed you?
It would be nice if it moved back and forth a little more.
View detail
best buy
If you don't need a high-end Income, this is the best choice.
Music and Navigation audio are more than sufficient. [Color] It sounds Clear to me.
View detail
I'm very pleased.
I have used various products, but I think this product is durable and easy to use... I honestly can't tell with the naked eye if it reduces vibration.
I have used it for less than 20,000 km and my mobile Camera is safe.
I would recommend this product.
View detail
Might depend on helmet.
Other impressions show that Size. (especially thickness) I was worried because I had read that the "Large" was too loud and it would hurt my ears.
In the case of my helmet (SHOEI GT-Air? L Size), I was able to install it without any problem.
There is some pressure in the ears, but I got used to it.
View detail
![[DEF] YATTAH Motorcycle Mount One Push](https://global.webike-cdn.net/photo/impression/7f/7f2e1c2226d44c6a6d2829ec31bd5b42L.jpg)
It's the only way!
When I converted my ZX14R to a Pipe Handlebar KIT, the clearance under the Handlebar Center is only about 4mm, so the usual Smartphone Holder cannot be attached. I was looking for a Smartphone Holder that can be attached to the Pipe Handlebar KIT, and this is almost the only one I could find.
Installation is super easy with no tools required.
View detail
Reliable feeling increased
I have it mounted on my SEROW and use it for on road and forest road touring. I was looking for a Holder that can be fixed with four corners because my smartphone has several control buttons on both SIDE. The inexpensive Chinese-made holder that I had been using until now was insecure in fixing the four corners, but this product has no worries about coming off due to vibration, etc., even when touring on forest roads, and the smartphone screen does not shake, making it difficult to see. I feel quite secure using this product. Of course, it can come off if you pull it hard by hand, but I don't think there is much worry about it falling off while driving. However, I also use a Rubber Band to tie it on just in case. View detail
Small and convenient
It's helpful because it's not bulky in my Pocket.
Convenient to put your driver's license, card, and bills in it for a quick trip out.
It is good to go touring without carrying a bag for short distances.
Design and feel are not bad.
View detail
Convenient to carry without baggage
Convenient for touring with just a card and a small gold coin.
If you have bills and cards, you will have no trouble in touring.
I like that it can be stored in Pocket and not be bulky.
View detail
![[DEF]Smartphone Holder with USB Charger](https://global.webike-cdn.net/photo/impression/63/632c5cb804471a7e4902a037eb863800L.jpg)
It's a pain in the ass how to fix your phone.
Turn the knob on the Right Side and Quantity your phone.:Pair (for Left and Right) If you use the Elastic band that comes with it, you won't drop it, but it's a hassle to put it on and take it off every time. If I didn't use the Elastic band, my phone flew off when I picked up the Gap on the ground. Fortunately, because the ground was soil, the phone was safe, but if it had been concrete, it would have been baked. View detail
![Definitive Supplies [Defferential Gear] Multi Mount Bar](https://img.webike-cdn.net/catalogue/images/62162/DEF_DEF-MM1BK_eb298d93-7b69-41f4-a16e-e0894da44fdf_2400x_TS.jpg)
The Mount bar can be shifted and setIng
This is a Multi Mount Bar for Smartphones that is fixed to the Handlebar.
The horizontal bar where you mount the Smartphone is the Quantity:Pair (for Left and Right) It is nice to be able to change the position depending on the purpose and weight balance.
It is also well made and very useful.
View detail
Earphone is too thick.
The EarphoneBody is so thick that it hurts my ears and I can't even wear it for a minute.
If it was designed for a motorcycle helmet, I wonder what kind of helmet it was designed for.
I thought I would have to remove the back cover to make it thinner but that didn't happen and it was a waste of money.
If you're not going to buy this, you're better off buying an obscure Chinese thingy from Amazon.
View detail
Convenient to hold small change.
This is the best size Large wallet for touring. This Large size is easy to carry in your pocket and you don't have to worry about driving style. View detail
Pocket and not bulky
The size is compact, but it is convenient to put your driver's license or card. It is easy to carry on tour. View detail
Cosmo!
I bought this to listen to music and Navigation.
Solo touring is mostly convenient.
It's also inexpensive.
View detail
It was a mistake.
The speaker is too large and too thick, and it hurts my ears.
The purchase was a mistake.
View detail
Well, I guess it works!
Since I'm mostly solo touring, I bought the Wireless headset because Income is too pricey.
Because it is Bluetooth, there is no extra wiring, and I think that it is convenient for solo.
View detail
Mounted on shoei GramStar
I do not know the standard thickness, but I could not use it as it is because the ear was painful for the thickness of Speaker, but I removed the back side of Speaker cover and put it on safely, and I can use the sound quality and the operation method without a problem at all.
I don't know about the standard one, but it seems to be a Type that connects to incoming calls on its own, but I feel like I got a good deal for the price, including that feature.
View detail
![[DEF] YATTAH Motorcycle Mount One Push](https://img.webike-cdn.net/catalogue/images/71925/BM4_a_1024x_TS.jpg)
Very Kan-Tan and easy to use
i changed to iPhoneX and it doesn't get stuck in the holder I've seen it
Only Sample, out of stock and not yet in stock? I ordered it from We-Big as they had it in stock
Installation is tool-less and easy, but
A Motorcycle that has vibration may go Gap with vibration
It can be switched to the side when you want to check the navigation or something else It comes in handy
It seems to hold the corners so you don't have to worry about them falling off
Also, it's not a hassle to put on and take off your bike without tools, so it's not a hassle for me I think it's a good idea for
It's not relatively expensive, so I think it's a good cosmetic product
View detail
Nice Gloves Clipper
This RIDEZ Gloves Clipper is much better than I expected. It can hold my Alpinestars short gloves tightly. Worth to buy it. View detail
The actual item accuracy is lower than the product image
Usability is likely to be good, but the quality of the image on the item description and the quality of the item sent has been quite different.
The engagement of the part clipping Gloves is bad. You can not recommend purchasing for those who are asking for perfection.
View detail