Reviews
Recommendation for those who are anxious to draw a Maintenance Stand alone!
Although an instruction manual is included, it does not explain the details of how to assemble the unit, which was confusing at first. I would have liked to have a guide to the screw holes to be used for the approximate number of inch tiers.
There was a product video on how to use and assemble the product, so I checked it out and assembled it. The video was very helpful.
The NINJA1000's front tire (120/70Zr17) was firmly secured and stood on its own. It also felt stable when lowering the bike.
I used to do maintenance only with the Rear STAND, but when I lifted up the bike by myself, I didn't hang it properly and it fell over. I wish I had bought it before I stumbled...I would like to recommend this product especially to those who work alone to avoid damaging a large motorcycle.
View detail
Convenient to install Disc Lock on the vehicle without burden to the body.
I would like to carry a Disc Lock with Alarm to protect against theft while on the road, but I don't want to carry it in my backpack or HolsterBack because the Disc Lock is so heavy.
Also, since I ride a naked motorcycle and did not want to use a Seat bag or Tank Bag just for this purpose, I chose this Holder which allows me to secure the Disc Lock to the vehicle body.
This Holder is designed to be attached to the Handlebar, but I didn't want to make too much noise by attaching this and that around the Handlebar, so I attached it to the Tandem FootpegBracket.
I am satisfied with the ease of use.
View detail
Handlebar Lock is not possible.
Ignition and Seat Cylinder set.
I was able to purchase it at a reasonable price, but I was unable to lock the handlebar, which is the most important thing.
We took security measures in a different way.
View detail
Hook was not needed.
Used on GPZ900R. The large hooks are not suitable for motorcycles with hooks, but the large mesh of Rubber is the best choice. View detail
Guardian bell
I bought it at Harley's Amulet and it looks cute and makes me feel like I'm wearing one point of reference. View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVITop case, this Carrier
Mounted on PCX JK05.Corresponds to all models. Some PCX models require modification, but JF81 and JK05 can be installed by removing the cover.
I bought it because I planned to install GIVI's Top case (Mono-lock) from the beginning.
It is Small and is the cheaper of the Carriers.
If you want to install GIVI's Top case, this is the CarrierRecommendation. You can even order it from authorized dealers.
View detail
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
Taste after 5 years of use.
It can be looped so it can be adapted to any Style.
The first is a bright Orange color.
The more it is used, the more natural the brown color becomes.
Button with Crimp on thick cowhide.
The key and Key Holder will not come off.
Motorcycle riders are looking for a product like this that is sturdy and won't scratch around the Stem.
I found a pretty good product.
View detail
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
Convenient to carry Helmet
[How is it used?
Helmet attached to Carrier.
How was your experience with it?
Large is better for touring net. For camping, it may be too small or too small.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
perfectly (suited)
Just the right Size...TSR's products are well thought out. View detail
Purchased due to malfunction
It has been about 2 years since I purchased Income. I bought it to try it out because I was the only one who was having trouble with Noise when I was using it.
I was hoping that it was not a malfunction of the Body, but when I tried to use it, I was able to hear it properly.
I think the cause of the failure is that Helmet was used with the speaker left inside even when Income is not in use. Considering the heat during the summer, it may have been a state of considerable overuse.
So you might want to leave it off when not in use.
View detail
Fits: HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD
Suitable for Separate Handlebars
I purchased this for a new installation of SENA's MESHAntennas. I re-installed the Antennas on the Multi Bar that previously had the Smartphone Holder and the Smartphone Holder on BPYamato's AluminumMount Bar. It is a product for CBRetc. SS. View detail
A more well thought out Size than the usual same product.
As expected of a TSR product, the size is a little small. I have nothing to complain about it.
Just fit the Reserve tank on the front brake.
The following is a comparison of the size of the two. Compare with normal Size.
View detail
Easy to use
The rear wheels can be used without difficulty, but the front wheels cannot be used. The front wheels are gradually shifting, perhaps because they are stuck in place. View detail
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
Glad I bought it.
I was taken by Evens and had to give up on it because it was not sold in my neighborhood.
After more than 6 months, I suddenly remembered and looked for it and bought it. I am glad it was in stock.
View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
Essentials for Overnight Touring
Lost my HalfCover that I used for 6 years last year on a touring trip, and purchased this product because the previous one, a necessity in case of open-air touring, was discontinued.
As I had expected, I will use it without the Pannier case, although the width of the Rear is not enough for Shinobu Sen with the Pannier case attached.
The half has a string fastener at the center and a quantity fastener closer to the rear.:Pair (for Left and Right) It has a D-ring in one place. I think you need to prepare a clasp.
The fabric is thin, lightweight, and easy to handle.
View detail
Band for installation is too sturdy. (Large sweat)
The mounting band is too sturdy, very stiff. (Large sweat)
Too thick to bend.
The width is a little large compared to the buckle.
Backs require a lot of effort to attach and remove and do not look good.
After much deliberation, we decided to DIY the Mounting Hardware.
The Bag itself is durable and functional!
View detail