Reviews
Does a surprisingly good job.
This is an inexpensive Chinese Case that I have seen on some Site. (Although it has the company name of "Rough &Road" on it.)
It is inexpensive but does the job well. (For now)
It is installed on CT125CT110 HUNTER CUB (JA65), but it seems that Attachment for CT110 HUNTER CUB is not necessary separately and can be installed.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
It can be used with a turnstile.
I bought this to attach my old Porch and Smartphone Case to my Scooter.
As others have stated in their reviews, it rotates when installing the Porch and other parts.
I solved the problem by adding a Nut to stop the loosening.
Because of its high quality, the appearance of the product without Porch and other products is not bad.
View detail
What you want to use when you want to use it.
[How is it used?
Mainly used on a YZF-R25 with no ETC installed, with a little over 20,000 km since 2015, mainly on toll roads and vending machines, with Jacket's Left Hand Pocket.
・Jacket
1．Rough Parka
2. a rough&road winter parka with a soft feel that I can't find the name of.
・Bag
KUSHITANI Leg bag
Was the one you received as per Image?
At that time, I bought it in the actual store of Rough&Road, so I checked the actual item, not the Image.
How was your experience with it?
Because it is attached with Magic tape, it is very easy to use when jackets are changed with the seasons.
I think it can hold a lot of hardened coins, though it can't hold 1 yen and 5 yen coins.
It saved me time and effort, as I didn't have to search for coins in a Coin Purse, rather than storing all the coins in a jumble.
Quantity:Set to be used in the following situations
1. toll roads around Izu Peninsula where ETC is not available and expressways when ETC is not installed:It is easier to just hand over the bills, but I think it was useful to get the desired coins out quickly as long as they are not stuffed to the limit.
Vending machines:At that time, there were many more vending machines that did not accept cashless transactions than now, so there was no need to take out a wallet and the necessary amount of gold could be immediately issued, thus saving time and effort. Furthermore, since vending machines do not accept fractions of less than 10 yen, the change from coins taken out of the product can always be stored in the product.
In a little over a year of use before the back Button rusted out, I don't think the coin compartment expanded or scattered coins.
I felt that the RoughAndRoad Jacket, which has a dedicated pocket in the left hand, worked well with the Bag, which was a hassle to access and sometimes I worried that I might drop something I didn't want.
[Points to note]
I think the gold buttons on the magic tape are rusted, though it may be due to exposure to rain.
How did it compare to other products?
KUSHITANI also offers a similar product at almost twice the price of this product, but I think this product is fine if you are not particular about it, since it is normally used for Leg bag and, as I recall, there is no Logo at all in each other's bag.
https://www.kushitani.co.jp/products/k3594.html
Point and hang of installation
The Magic tape attached to this product is about 25mm on the ThornThorn side. Therefore, if you want to install a new one, you need to prepare the fluffy 25mm one.
Compared to the Coin Purse, it is more difficult to handle 1 yen and 5 yen coins, and there is the hassle of separating them when storing them, but there is no need to take out the Wallet. "The hassle of finding the desired small change when taking it out." I think I used it for a long time because I was grateful for the stress-free feature of the elimination of the
View detail
Just the right size
I purchased this for the purpose of storing my radio, it attaches to the Tank horizontally on the Black Bird and is convenient for refueling without having to move. If only it came with a Rain Cover. View detail
Goods are good
I bought it because I thought it would be convenient for my child to hold onto.
While conscious, we hold on.
The distance seems to be just right and easy to grasp.
However, it is dangerous if you fall asleep.
Naturally, I feel like I am going to fall.
Children may be in danger if they are not tied down.
View detail
Bar padBag
Offfor Vehicle purchases.
I was going to buy the same Manufacturer's One size Large size, but
Changed to this MODEL because it is sold out.
Cigarette, Zippo, Fold Wallet, and Mask can all fit.
A small phone may fit in the clear case portion of the navigation/smartphone compartment. Incidentally, Xperia1? It is difficult to take out the phone from the case (laugh).
View detail
It is a little difficult to install.
The size is just right for a GRASS TRACKER retrofit carrier, and it is convenient for storing small items.
However, there is no description in the Instruction Manual on how to fix the included fixing band to the motorcycle, so I have been installing it in my own way, but I am not sure if it is correct.
View detail
It might not be suitable for Off-road.
I bought this because I wanted a Large fine-meshed Saddle Bag.
It's not a Saddle Bag, but the capacity is large, and I think the high waterproof point is good.
I'll write my personal opinion from here.
If not installed with Saddlebag Support, it will hit the rear tire.
Also, if you use the belt that comes with it, you will not be able to use Tandem because it attaches to the Rear part of Seat.
I made my own Belt and PlasticBuckle and attached it to my Rear Carrier.
With the right adjustments, Tandem:o ability and will not hit the rear tire.
Note that the Main compartment is Completely Waterproof, but the other Pockets are non-waterproof.
View detail
Purchased to attach Rough & Raw products.
[How is it used?
I bought this to put on my Rough & Raw products.
Was the one you received as per Image?
The product was as I expected, though.
Was the installation difficult?
Installation is Quantity:There was no difficult point because I only set it and tighten the screw.
How was your experience with it?
I was able to successfully install my current Rough & Raw product!
[Included Parts:were they on?
Included Parts:was only Screw, so the only other parts are Body.
The problem is that even if you tighten it with Screw, it will inevitably move a bit!
It seems that the fixation is a little weak even if it tightens it with Screw instead of the installation Body.
Next kre is an improvement.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The durability of the rubber strap is
It is waterproof, and you can close the top cover by turning the mouth round and round. It's the same mechanism as a typical waterproof bag.
When it rains, the contents stay dry. It's perfect. So it's a good idea to keep things that you don't want to get wet, but if you put something in there that's a little bit wet, it can get steamy.
Also, the rubber strap for fixing it is thick and sturdy, but it stretches gradually, so you will need to find a way to fix it. So I don't use it now. If you want to buy one, I think Belt type is easier to adjust and will last longer.
View detail
We need it to angle.
With P.A.SMount, I had attached Accessory Case around Handlebar, but when it is Mount of Magic tape, it turns round and is difficult to fix, it came to be able to mount with this at the designated angle.
However, it is a pity that a little play comes out in the direction of rotation even if I tighten it as much as possible because it is tightened only with Screw of the Center part, and the black part of plastic has come off from the place of the four Rivet fastening points while using it.
I tried pushing it in for now, but before I knew it, I couldn't get it to polish off and it no longer felt reliable.
It was easy to install and convenient, but I don't use it much anymore because I don't want it to fall off while driving.
View detail
I'm happy with the function
I can't complain too much about the price, but I feel that it cannot be fixed tightly I've tightened it up quite a bit, but it moves pretty easily when you move it by hand I'm not sure if this is the case or not
The important point is that the Joint part was rusted from the beginning I've never seen this happen before Normally this would be an Objection Level case, but it's too much trouble, so I'm using it as is (T-T)
I installed the Side Back and my impressions are very good (By the way, school bag) The motorcycle is a Bell RC50
View detail
Focus on Design
You need to be creative in storing it because it's shaped like a drum The bottom is round, so it is not stable unless it is fixed tightly
I still think Square's Seat bag is more user-friendly Well, it's just the atmosphere and appearance
I feel like I can fit about one night's worth of luggage in it But it's got a lot of D-cans on it, so there's some versatility in fixing it
There is a Fastener that you can access inside with your mouth closed, which is useful I feel the atmosphere is right for American and NeoRetro
View detail
Balance with Motorcycle is good
I've used ROUGH&ROAD products elsewhere, so you can be assured of their quality
Balance with the Motorcycle was a good choice
View detail
subtle
The product itself is nice, but anyway ...
If you use hanging so much, I guess it's pretty anxious if you consider it as horizontal.
View detail
It is convenient if you have one, but usually it is standard equipment?
It is convenient to have.
Since it is already equipped with ETC, it can be used in rural areas. It's a detachable type, and I can also use it to other places.
But for 3Season to take out without removing Gloves !? (In the winter, remove the thick Gloves, looking for it from the Wallet and saying that there is no big difference)
* Since it is a defective replacement item, if it is not Hapap, there is no loss
View detail
Universal nature is convenient and convenient
Purchased at the accumulated Point.
from before "function" "Carrying" "price" Balance the goods
Although I was seeking, I decided to try this time.
"function" - - You can adjust the Length of Wire, the character 8. Layout free is convenient.
"Carrying" - - Porch of a bicycle can also carry around storage method and weight.
☆
As for operability of release key, it is good enough to be careful, so there is no particular problem.
☆ ☆
We need to pay attention to the durability of Body's Wire lock mechanism.
View detail
I got a little Large
Rough made Tapered - Buy Cover as Tank Bag for for Replacement.
I wondered if I could make a little Large, but it was a Large rinse.
I think that it is good for the minute to divide it as consumable though it is not reliable because it was originally thin making.
View detail
Rose skirt for sewing
Porch, even at Tank Pouch P. A. Since I use SS system, I purchase it additionally.
The part to clasp the back : Sewing of Magic tape (Seam allowance) It is sloppy and can not be stopped by Beauty. (I do not measure individual Length as chitin)
I like cutting it and sewing it again, but it is the worst
From there, it can not be said that Magic does not start to peel off so you have to have it purchased in-kind or checked and shipped..
Because it is for Belt of the waist, so that it can be used for shoulder Belt of Rucksack, it is perfect if it can change the direction of 90-degrees.
View detail
Easy to understand Design
I think that it is good as Design of Wire lock. Wire storage capacity is also good, easy to use shape.
However, it is regrettable that the key is hard, there is hang in opening and closing.
Even if the price gets a little high, the key itself is a place I want you to make the opening and closing Smooth and reliable one.
View detail