Reviews
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
Purchased along with 2XL
I am satisfied with the quality and Cost performance. View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
A really nice ‘Mount’.
I purchased this left side 5 litre fuel can holder from Webike and as usual, the service was excellent and the quality of this frame is really impressive. The frame is really well powder coated with fit and finish being the best I've seen with these items. I had to drill two holes to allow the lock assembly to be mounted, but that isn't an issue. The best thing is that I can use panniers still over the top of this frame. A really good product. View detail
It's not compatible with my black box
Quality and Texture Information Flat Braces Easy installation of black boxes for your environment Size Chart Information License Plate Size Cost performance and comparison with other products. There are a lot of products, but the products that I thought of WeBike packaging is always great. Arrives in a week for delivery and packaging Purchasing concerns, precautions, or advice It's a shame to only give you black box fastening bolts It certainly doesn't fit other brands' black boxes, but it's definitely fair View detail
sufficient for one's needs
Used for outdoor bicycle parking.
The fabric is also well and has been exposed to UV light for 2 months with no deterioration.
I think it is a good one for the price as it still holds water.
View detail
I could use it for akeeyo's drareco.
Installation was also possible on akeeyo's AKY-958N.
However, there is no flexibility in the Screw tame.
Since I also added DAYTONA's Fender Eliminator, I chose "for Left", but "for Right" seems to work fine too.
View detail
Required Items for ETC Installation
I was concerned about the mounting position of the ETCAntennas and Indicator, so I purchased it. View detail
The texture is good!
PLOT Extension bar attached to Master Clamp for Nisshin/With Mirror Holder:Clutch Side and a second Smartphone Holder.
With DAYTONA's Smartphone Holder3, putting two Smartphone Holders between the Handlebar PipeHolder will damage the Handlebar PipeHolder.
So we installed it using this Extension bar, and the texture is better than those of other companies.
The moderate height difference makes it easier to attach and detach.
I really wanted Black, but as of May 2023, Black has been discontinued.
View detail
I think it's all settled in nicely.
I think it's all settled in nicely.
The regrettable part is that
It comes with Screws for installing and fixing the camera.
It would have been nice if it was the same color as the Body anyway.
Silver on Black stands out
View detail
Used for RearCamera installation of a driverless camera
When I was thinking about where to install the RearCamera when I installed the Mistuba Sankowa EDR-21G myself, I found this product.
Note that the bolt used to attach the Camera Bracket is small.
After installing the RearCamera, I am satisfied with the refreshing appearance.
View detail
Best installation method
The most difficult part of installing a Camera is securing the mounting position. This product is easy to install, looks unobtrusive, and fits in the refreshment area, so I think it is the best installation method for the Rear. View detail
SizeSmallest
I installed the bolt on the front fork, which is supposed to support up to 54mm, but I think it is difficult to use the supplied bolt. I prepared a longer bolt and managed to install it by bending the receiving part. The quality is not good for the price, and the paint is also scratched.
It will probably rust after a while.
View detail
hmm
I guess it can't be helped because it is a combination product, but the pitch of the Bolt where the Number is mounted does not match. Also, in the case of ZX12R, depending on the angle of the Fender Eliminator, the camera mounting part may hit the rear cowl and there will be no space for the camera to be mounted. I had to cut here and there, so I painted it. View detail
The position of the FrontCamera for the DRA RECORDING system.
Mistuba Sankowa EDR-21Gα for FrontCamera.
At first I thought about installing it directly on the light cowl.
It doesn't feel right somehow.
This Light Bracket fits nicely and I am very happy with it.
View detail
Used for Mistuba EDR-21 installation.
Purchased and installed on Mistuba Sankowa EDR-21 for Rear.
I looked around and chose this product.
Install RearCamera with License Plate
It looks neat and clean.
License Plate location so
The rear of the vehicle was captured perfectly without any blind spots.
Installation was very easy.
View detail
This is good!
I was struggling with the location of the Antennas on the ETC and the shape of the Bracket, the Cowl and Left SideSwitch controls, and the strength, all solved! I think it is reliable OK. View detail
The REBEL250 SEdition came with a Large
I bought this for my REBEL 250 SEdition to attach the FrontCamera drrorecorder to it.
of the same product before purchasing this one. "Φ40-Φ45" I bought the Size, but the Size was just a little short, so I bought this additional one.
As a result, this one was too large.
This is "Φ49-Φ54" So I thought I could make it work, but it seems that the middle Φ47 or so is Just fit.
If you are concerned about installation, etc. "Φ40-Φ45" I've also reviewed the Size, so please check it out.
The Bolt could not be installed there, so I used the Tie Band.
This one is too loose, so I put Seat in between.
I can't decide which is better yet, but I don't think there will be a large change if I buy either size, since it doesn't shake that much.
View detail
It was a little short for the REBEL 250 SEdition.
I bought this product because it is compatible with the REBEL 250, but it was not long enough for the SEdition with Fork Boots.
I thought it might be a little loose, but it feels fine for use on regular roads.
Since the Dr-Recorder is made in China, I can't use Bolt, so I use Double-sided Tape to attach it to Bracket.
View detail
For RearCamera!
I've installed it to fix the RearCamera on my Mistuba Sankova front/rear drrorecorder!
I can install it without any problems, so I recommend it to anyone who's going to install a Dramalec!
View detail