Reviews
Fits: HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50
It's a bargain
It is a simple Side stay.:Pair (for Left and Right) I think this price is a bargain at
There is no instruction manual, but anyone can install it with minimal tools. The quality of the product is in line with the price, but it does not bother me because of its simple shape. It has only been installed for a short period of time, so I am not sure about its durability, but I think it is solidly made without any rattling.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
cute little
It is good to have the name CT110 HUNTER CUB written in Retro. View detail
ct125
search webike
I ordered a curve keyring.
Small and cute just like the picture
It goes well with the Hunter Curve. I ordered it together.
Raincoat and Kumamon Yoshimura Backpack
I like them all, the price is good and the quality is also good
Actual photo attached
Take care and prosper
I ordered another product, but I want to get it ------------------------------------------ ---------------- Webike I ordered the curve key ring It's small and cute like a picture It goes well with Hunter Curve. I ordered together Rain and Kumamon Yoshimura Backpack Everyone likes it all. The price is good and quality is good Licent photo Please look pretty and flourish I ordered other products, but I want to get it. Powered by Google Translator
View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
For RearMaintenance & Motorcycle Storage
Used on a Grom JC92, absolutely necessary for RearMaintenance.
I am satisfied with the low price and the make of the product.
View detail
Recommended
The product is very cheap compared to other companies' products, and it is easy to install because of its quality, strength, and because it fits the vehicle EXACTLY. I was worried because the color was red, but when I installed it, it did not look out of place and I liked it very much. View detail
just right
I purchased this product to store my CB250R in Container.
Since the step difference was 20 cm, we decided on 1200mm because we thought it didn't have to be that long.
It can be stored without such difficulty, although it is necessary to push it forward with a little momentum to store it.
I was worried that it might gap, but the claw part is very good and stable.
It folds up beautifully and is a good buy.
View detail
Side Back, fun to choose!
Among the various exterior parts I installed on the CT125
It was the easiest to install.
Customization is not an easy task for beginners.
The work took about 15 minutes.
The quality of the product was high for the price.
I'm looking forward to choosing a side back.
View detail
Bag support that can be attached to the helmet holder
Some hang is required to remove and install the parts, but the work itself is easy to install as it only requires the removal of a few bolts.
When removing the rubber part of the air cleaner, it is recommended to install it in a warm place because it becomes hard and large when the temperature is low.
It does not interfere with the Helmet holder that attaches to the bottom of the CarrierLeft of DAYTONA, so it can be attached together.
View detail
It is the best cospa
It's a great costumer!
It's not cheap, the paint is solid, and the fittings are fine!
It is easy to install.Recommendation!
View detail
Cost-effective and solidly made.
It is almost half the price of other companies' products, but it is solidly built and the quality of the paint, welding, etc. seemed perfect. I highly recommend it.
Installation is not difficult as long as you can remove the air cleaner duct and tighten the two bolts together.
It may be only my unit, but the bolt on the tail lamp side is very hard and it was very difficult to use Hexagonal Wrench.
View detail
Cheap, so I'm a little nervous.
I've been using it for almost 3 years with no problems at all.
However, I use it for human use, not for Motorcycle.
I use something a little more expensive from another company for my motorcycle.
This Ladder is still Aluminum Ground.
The lowest price, at least that I've found, but it's neat, no problem.
View detail
Cospa best
The price is about half the price of other companies' products. I don't know the quality of other companies' products, but I am satisfied with the quality of this product. View detail
Safe and easy loading in the cargo bed
I used to use a thick wooden board for Motocross practice, but after hard practice, it was quite hard to load. It's foldable, so it's not too bulky to load in the car, and it's very easy to use. I'm not sure how durable it is yet, but I'm sure it will last a long time since the Trail bike and Motocrosser are light in weight. View detail
There's more to it than meets the eye.
I bought this because I plan to replace the front tire on my XR100. I was surprised to receive it and hold it in my hand. With such a simple structure, can it support the body of 108kg for many days? I inserted it into the frame pipe and put the foot Quantity:With only 2pc supports, front and back Quantity:Pair (for Left and Right) Can it absorb the force of action in 4 directions? I removed the Tire and supported it for 5 days. Since the pipe is so thin, it seems that the external force can be absorbed by the deformation of the pipe itself. When I lifted the car body, it was easy by the principle of leverage. It is a good purchase that betrays the first impression. View detail
Slope for Motorcycle
It's made of aluminum and is lightweight, making it easy to use. View detail
Slope for Motorcycle
It's made of aluminum and is lightweight, making it easy to use. View detail
Used for MONKEY, DAX, CHALY, etc.
The picture is a lifted state with MONKEY8InchSpec.
The Tire is about 10cm up.
It's stable enough for lightweight vehicles and easy maintenance.
View detail
Fits: HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50
Cospa is good
There are many products for CROSS CUB, but this one has a simple structure and supports the side back firmly. The mounting bolts are made of steel, so I think I will replace them with stainless steel ones. View detail